Storage organization - it is an interesting and responsible, and if you are a wine gourmet, provide aesthetic place for the noble drink - your debt. We are talking about a wine rack or stand.
Stand the bottle is a perfect accessory to your interior.
This is a useful thing for the house, which will serve as the storage of wine bottles.
Content
- 1 Features storage of wine bottles
- 2 Stand for bottle of newspaper tubes
- 3 Stand for bottle of wine out of tin cans
- 4 The process of applying paint
- 5 Shelf for bottles of cardboard with their hands
- 6 stand balancing
- 7 Elegant stand on hinges
- 8 Plywood and leather strips
- 9 metal stand
- 10 The holder of the hooks or metal plates
- 11 wrought iron stands
- 12 The simplest model of the angular holder
- 13 Creative shelf tubes and skin
- 14 VIDEO: Stands for wine bottles made of wood.
- 15 50 variants of the original stands for wine bottles:
Features storage of wine bottles
Wine requires specific storage conditions.
All guests and friends will be delighted to come to your house to watch carefully arranged bottles that are easy to reach.
- Temperature 10 - 15 degrees C. This is an ideal temperature range, which allows emergency supplying the beverage to the table. If you keep the wine at a high temperature, it begins to age: the aroma is losing its former subtlety and sophistication. At low temperature, the beverage ripen stops, starts the beginning of the oxidation process.
- The optimal humidity of 60%, while the cork will not dry out, will not be lost tightness of the bottle.
Make a stand with their hands is quite simple.
- The drink does not like direct sunlight. Exposure to the bottle leads to the inevitable deterioration of the product. It is necessary to arrange the angle darkened storage.
- The position of the storage - horizontal. This condition applies only to bottles, corked from natural raw materials, so they will not dry out. For synthetic corks bottle position does not matter.
- Absence of a consistent transport, vibration. Guilt needs some rest, only if it ripen as it should.
It can be used not only in the apartment, but also for the wine cellar.
Stand for bottle of newspaper tubes
Paper - a material for the original stand for any kind of wine. It is a budget option for the design of which will need: paper, ruler, knife, paint, cardboard, mini skewers for kebabs, PVA.
In every house you can find a lot of newspapers and magazines unnecessary. Them we will use in our master class.
The first phase of work on the production of palm wine storage, involves winding on skewers pieces of newspaper pages. Edge stick should come out with a bevel. Next step: harvesting laid out in a row. Make sure they fit snugly together. Evenly PVA glue, the device should be as qualitatively recorded.
Just cover it with varnish for wood and you can safely insert a bottle of wine.
Once the product is completely dry, cut polygon: 30 X 30 X 33 X 16. The edges of the glue and fix a foldable clip on both sides. When the structure is dry, cut a circle the size of which corresponds to the bottom of the glued products. After attaching the bottom - the final stage of work: varnishing. Apply it at least two layers and let dry.
If desired, make more colorful and graceful thing you have to paint the stand of the newspaper tubes of acrylic paint you liked color.
If newspaper or magazine tubes are perfectly suited to your decor, the wine rack ready.
Stand for bottle of wine out of tin cans
A great option material stands for wine bottles - cans. You can use any tin cans of peas, beans or corn.
Necessary materials:
- glue;
- spray paint;
- the cloth;
- Knife for canned food;
- cardboard;
- Banks 8-12 pc.
Very interesting idea, which can be used as a shelf with their hands.
Clear labels on cans: pre-soak them in warm water, because the paper is removed from the surface easier. Leave to dry clean jars. Cut out the bottom of the banks, and sharp edges should be carefully treated, by bending them inward.
The process of applying paint
- Put the jar on the stand and apply the paint on the inner side.
- Turn the jar and apply the paint on the other side.
- Wait until the product is completely dry.
- Proceed to paint the outside edges.
- Give work to dry.
Number of jars may be different, it all depends on how many tiers you want to do in the stand.
Collect design. Determine how many cans you will be in the front row, and put between them superglue. Secure work clothespins. Rep Autres conceived number of cans, secure and let dry.
Shelf for bottles of cardboard with their hands
Materials for the work:
- scissors;
- two cylinders of thick paper with an axial bore (sleeve can take on a paper towel);
- felt;
- Scotch;
- hot gun;
- glue;
- line.
This stand looks no worse than store-bought.
Cut the cylinder office knife, find the middle and fold it. The same should be done with the second cylinder. Glue two cut cylinder with each other, came to four cells. Okleyte all edges of the palm wine scotch, better to take the plumbing industry. With hot gun obkleyte work felt. Well hold the cloth against the surface, and the extra pieces - cut.
stand balancing
An original tabletop stand for a bottle of wine, which creates the effect of weightlessness. To create such gizmos need wood 20 mm. timber.
Creative holders for wine bottles, the creation of which will take a minimum of time, will be a win-win idea for a gift, it is appropriate for any occasion.
The length of the wooden trim must be 350 mm and the width -. 75 mm. One side of the timber, which will be located on a table, cut off at an angle of 60 degrees. The second - rounded. Departing from the rounded side 80 mm., Is cut 35 mm diameter circle.
You will always know how to put to use wood scraps from previous projects.
Elegant stand on hinges
Necessary materials:
- 26 X plywood sheet 38 - 2 pieces.
- hinges - 2 pcs.
- cord
- drill
- ruler, pencil
- sanding paper.
The idea of this project impresses with its simplicity and expressiveness.
Measure the location of the circle on the plywood. In general, they should get out of twelve pieces, six on each sheet. Sand the edge of the circle with sandpaper. Workpiece can reveal the varnish or paint in the desired color. The sheets together via hinges. In order to support the storage of wine bottles standing firmly on the surface, the bottom of the drill hole for plywood braids, which will fix the structure.
For the manufacture of such a desktop stand the main thing - to choose the right wood harvesting.
Plywood and leather strips
Very unusual and elegant look stand with leather materials. For this model, you will need two plywood: 50 to 50 cm. One, as a basis, it will stand on the product, and the second will be fixed bushings, 45-50, see the length of each.
If desired, the product can be covered with decorative trim: wax, stain, oil or varnish.
Leather 2-3 cm wide strips. are fixed to two bushes, arranged in parallel opposite each other at a distance of 15 cm.
Thus, the cell will be created to store wine.
metal stand
Supports of metal can be ordered from the master. Products made of metallic material have several advantages:
- solid appearance;
- reliability, durability and stability;
- architectural design.
Bottle holders gradually perekochovyvayut of interiors of bars in the houses.
The holder of the hooks or metal plates
This design is suitable for the kitchen in country style. In a large solid wood inserted metal hooks. The board will be mounted on the wall vertically.
The hooks are fixed on two sides through equal interval.
Additional Information. To create special authentic spirit, as the hooks may be used iron bolts as on the railroad.
These coasters for bottles excellent save space.
wrought iron stands
Expensive wines are harmonious look in forged rim. Expertly erected forged products highlight the status of the wine gourmet. This stand will attract the eye and in the living room and the kitchen.
Decoration you can think of yourself, something that will be enjoyed and will correspond to the spirit of the previously constructed the interior of the room.
The simplest model of the angular holder
An interesting option for storage - corner bracket. To create his own hands this model supports for wine bottles required beam with these parameters: length - 232 cm, width - 48 mm, thickness - 70 mm... The upper edge is cut hole 35 mm in diameter. The bevel angle of the base should be equal to 125 degrees on the inside and on the outside - 43.
After the area is completed, it is necessary to varnish, stain or wax.
Creative shelf tubes and skin
Of metallic copper pipes and pieces of skin can build the original stand in the loft. You will need to order a special tube shapes, which are attached to the pre-treated pieces of skin.
Alternative pipelines may amount to a material made of wood.
There are many ways to create products for the storage of wine with their own hands. Chosen Regiment beverage will be decoration for your home.
Any connoisseur of noble drink will appreciate this product as a gift.
