Shopping for furniture can be seen glaring discrepancy in prices for materials for their production, and the final price of the product. This is particularly striking when buying a fairly simple piece of furniture, such as stools.
Stools often made of particle board.
Stools often made of particle board. This is a fairly cheap material, easy to work with, it is durable and is ideal for use in confined spaces. Glancing once on a stool made of chipboard is easy to understand what to do with her hands quite easily. Please find detailed instructions for the manufacture of various configurations stools at home.
Glancing once on a stool made of chipboard is easy to understand what to do with her hands quite easily.
Content
- 1 General guidelines for the production of stools
- 2 create a project
- 3 Choosing material for the manufacture
- 4 collect stool
- 5 VIDEO: Stools from scraps of chipboard, with their own hands.
- 6 50 photo ideas how to make the stool with his hands chipboard
General guidelines for the production of stools
Make a stool with his hands as possible, having at hand the professional and non-professional items and accessories.
Make a stool with his hands as possible, having at hand the professional and non-professional items and accessories.
The seat of the chair can be made of the resulting soft due to the foam and upholstery.
By binding instruments include:
- electric jigsaw, complete with shallow sawing;
- screwdriver.
For dressing stool seat can also be prepared foam and upholstery materials.
You may also need a drill with a drill and a stapler construction purposes.
Upholstery can be fabric, oilcloth, leatherette.
To simplify the task of assembling the pre-parts can be glued, and then fix them with screws.
Materials for the manufacture of:
- chipboard sheets, new nekonditsiya or remaining parts of old furniture;
- screws, not longer than the thickness of the particle board;
- SCREW 4 pieces. Size of 6.4 mm to 50 mm;
- metal corners 4 pieces;
- Adhesive tape for processing sheet edges;
- thrust bearing of any suitable material;
- sandpaper for polishing.
Creating a stool made of particleboard with your hands allows the master to not limit yourself to the standard models.
Tools lay that exist in any home:
- pencil or marker;
- Cardboard for the manufacture of templates;
- ruler or tape measure;
- a knife of any configuration, the main island.
It would seem that a simple stool design has dozens of different models.
Parts of stool collected by means of screws and SCREW.
For dressing stool seat can also be prepared foam and upholstery materials. Upholstery can be fabric, oilcloth, leatherette.
Illustrative examples can be found in furniture stores, the neighbors or the Internet.
create a project
Creating a stool made of particleboard with your hands allows the master to not limit yourself to the standard models. It would seem that a simple stool design has dozens of different models. Illustrative examples can be found in furniture stores, the neighbors or the Internet.
Typically, you must stools several pieces, so it is important to choose your favorite shape and make the selected drawing identical items.
Getting the final assembly of parts necessary to pre-treat all special tape cut edge.
Typically, you must stools several pieces, so it is important to choose your favorite shape and make the selected drawing identical items. In the manufacture of the drawing it is important to remember that the stools design requires precise balance between the upper and lower part of it. The discrepancy between the seats and the size of the width of the feet can lead to an imbalance, resulting in the subject will be very unstable, and because travmoopasen.
In the manufacture of the drawing it is important to remember that the stools design requires precise balance between the upper and lower part of it.
Choosing material for the manufacture
Stools may be made of different materials. Fit chipboard, plywood, wooden blocks and boards. The cheapest and most simple to use and - a chipboard. Sheets can be purchased in a store, at a furniture factory or buy trim in small companies that manufacture custom-made furniture. Fit also old chipboard sheets that were previously part of another furniture.
The main pre-determine the number of pieces of finished products, and calculate the required volume of material.
The discrepancy between the seats and the size of the width of the feet can lead to an imbalance, resulting in the subject will be very unstable, and because travmoopasen.
The final touch in the preparation prior to assembly is drilling the necessary holes.
Apply the graphic layout
Stools may be made of different materials.
Having defined the model of the future is necessary to mark the stools sheet chipboard, preparing him thus for further work. If you plan to make several identical stools, it is best to make a template for all parts of the furniture. Template conveniently be made of cardboard.
For further ease of use should be made of furniture parts round off the corners. Run smooth curvature better with a compass. The absence of the subject can be compensated, for example a plate, of appropriate diameter.
The cheapest and most simple to use and - a chipboard.
High velocity sheets will provide cutting without spalling and chipping.
After trimming is necessary to clean all edges stool sandpaper.
Depending on the shape and size of the model elements may be as follows.
Wn / n Model stool back leg Measurements crossbar Size
- 1 30x30 30x40 20h12
- 2 30x40 30x40 30h15
- (3 pieces)
- 3 40x40 20h35 (8 pieces) 30x20
- (4 pieces)
Fit also old chipboard sheets that were previously part of another furniture.
Cut the elements for the future of the stool
The main pre-determine the number of pieces of finished products, and calculate the required volume of material.
Cutting elements from available chunks chipboard produced by an electric jigsaw.
Cutting elements from available chunks chipboard produced by an electric jigsaw. Make a good cut edge of the can by means of sawing and small high speed operation jigsaw. High velocity sheets will provide cutting without spalling and chipping.
After trimming is necessary to clean all edges stool sandpaper. This treatment will provide a good fit one piece to another and simplifies assembly.
The final touch in the preparation prior to assembly is drilling the necessary holes. Make sure that the holes drilled at the same level.
Having defined the model of the future is necessary to mark the stools sheet chipboard, preparing him thus for further work.
collect stool
Getting the final assembly of parts necessary to pre-treat all special tape cut edge. The tape is necessary to select the color of the sheet, or vice versa contrasting shades.
The tape is applied to the cut of the legs and seat and glued using a hot iron. Iron is necessary to apply a rapid and short movements. Warm belt should press down with a clean cloth. Clay, which is on the reverse side of the tape, quickly grasped and does not require a long warm-up or cool down.
Parts of stool collected by means of screws and SCREW. To simplify the task of assembling the pre-parts can be glued, and then fix them with screws.
The seat of the chair can be made of the resulting soft due to the foam and upholstery.
For further ease of use should be made of furniture parts round off the corners.
Run smooth curvature better with a compass.
VIDEO: Stools from scraps of chipboard, with their own hands.
50 photo ideas how to make the stool with his hands chipboard
