Closers for kitchen cabinets: the advantages and disadvantages of the mechanism

click fraud protection

Closers for kitchen cabinets - is a specific mechanism that is placed on the cabinet doors with a view to the smooth, silent closing. Making possible escape of chips on the body, cracks in the glass and the other defects of kitchen utensils. They help extend the life of furniture, contribute to its comfortable use.

The main difference between these loops from the usual

Help extend the life of furniture, contribute to its comfortable use.

Most of the kitchen cupboards equipped with automatic closers, but if not, then it is a simple fix, mounting the construction on its own.

Installing the furniture door closer

Pay particular attention to the assembly and maintenance of terminal units for kitchen cabinets.

Operation of this mechanism is as follows: inside the metal capsule filled with a silicone oil or a filler is firmly anchored spring. When the door closes under its own weight, there is pressure on the closer focus. Its internal fluid enters the back of the capsule, which keeps the system seals. Adjust the speed of the piston stroke possible due to the special latching adjusting link, the properties of a decrease and increase the outflow channel. The slower the rate of movement of the piston, the door closes slowly.

Furniture accessories for kitchens

When the door closes under its own weight, there is pressure on the closer focus.

Apparatus latching BLUM

Regardless of its advantages, the work will be of poor quality if the mechanism will be set incorrectly.

No need to fear that the failure mechanism of oil spilled and damaged the furniture. The system is designed so that even if a large damage, it will remain in place.

The closer to the kitchen cabinet

The slower the rate of movement of the piston, the door closes slowly.

Content

  • 1 types closers
  • 2 Main types of accessories
  • 3 advantages of the mechanism
  • 4 disadvantages
  • 5 Installation of door closers home
  • 6 VIDEO: closers closing the facades of the kitchen.

types closers

  1. Hull - fixed on the body of furniture. One of the best budget options.
  2. Self-tapping - screwed on the screws, self-tapping screws.
  3. Loop - mounted in special hinges or evrovinty. Such a mounting is considered the most reliable, but it does not operate in sliding structures.
Closers for kitchen furniture

If fittings beginning to creak, it is necessary to tighten up the screws on the hinges.

Closers and hinges for kitchen cabinets - high quality fittings

The mechanism will bring you the comfort of true a long time if it is made of quality material and will receive proper care.

According to the principles of operation are:

  1. Oil - ensures smooth, full closing, are often used in a modern kitchen.
  2. Gas - graduate from sliding in the middle of closing. Characterized by the low price.
Closers for kitchen cabinets, installing

Loop periodically lubricate all the mechanisms on clean soft cloth and soapy water.

The above designs are acceptable for hinged kitchen cabinets, for withdrawable guide system mounted with a special spring. Such closers, too, are divided into oil and gas.

Closers

The system is designed so that even if a large damage, it will remain in place.

Closers for kitchen cabinets for the kitchen should be selected on the basis of order, where they will be mounted, a load subjected.

The choice of the mechanism for the kitchen and its installation

Hull - fixed on the body of furniture. One of the best budget options.

Main types of accessories

  1. Oil closers - produce a set with the hinges for swing doors, or only with a key, it is possible to fix in any part of the body. Door closers are made with a bend with a straight or angular shoulder and inclined loops.
  2. Standard four hinge with integrated door closer. They are used for doors, opening angle of which ninety-five to one hundred and seventy degrees.
  3. Mechanisms for drawers with a load of 25 kilograms without height restrictions. Full hardware, creating a full or partial Extending the boxes, their soft closing. It holds up to thirty kilograms.
  4. German closers for swing doors with patch, patch the floor, loose hinges. The opening angle is approximately two hundred seventy degrees.
Closer to krest.derzhatelem for overhead doors

Closers for kitchen cabinets - is a specific mechanism that is placed on the cabinet doors with a view to the smooth, silent closing.

advantages of the mechanism

  • Smooth closing doors to prevent breakage.
  • The door will not open by itself adheres to the cabinet.
  • If a fault or a liquid oil is kept in the capsule without damaging the furniture.
  • Able to withstand fairly heavy loads.
  • A wide range of mechanisms of choice and price, suitable to any budget.
  • Long service life.
  • Easy to install.
Hinge soft closing

Most of the kitchen cupboards equipped with automatic closers, but if not, then it is a simple fix, mounting the construction on its own.

disadvantages

  • Perform installation instructions must be strictly.
  • Insufficiently aesthetic appearance.
  • Oil closers difficult to operate at low temperature due to the oil viscosity.
Installation of door closers in the kitchen

Closers for kitchen cabinets for the kitchen should be selected on the basis of order, where they will be mounted, a load subjected.

Installation of door closers home

Installation for kitchen cabinets coils depends on the design of the hardware. Mortise type requires drilling holes corresponding sleeve in the enclosure housing. Then the capsule is inserted into the socket. It is much easier to establish a mechanism that is attached to the screws to the inside of the cabinet or one of the shelves.

Accessories for kitchen

Although the latching mechanism is arranged without too much difficulty, in case of failure it is easier to replace a new one, or else call the master.

Mounting accessories for the pull-out kitchen drawers difficult, since they have a different design. These are larger than ordinary systems. Before installation, it is worth checking that under the rails there is free space the size of two millimeters.

Closer to the kitchen on the loop

The opening angle is approximately two hundred seventy degrees.

The sequence works as follows:

  • pull out the drawer from the cabinet if the restoration of the cabinet, it is better to remove;
  • dismantle the old items;
  • in their place to attach accessories to the door closer;
  • check that the strap on each side are arranged symmetrically;
  • Tigger attach to the bottom of the box.
Closers for kitchen drawers

Do not loosen the adjusting screws until the end.

If a narrow box (width up to ninety centimeters) possible one-sided installation. Large boxes must be fixed at the wide pair of guides.

Installing a door hinge with a door closer

Full hardware, creating a full or partial Extending the boxes, their soft closing.

Upon completion of the door closer installation requires adjustment. Pay attention to the speed of the sliding, closing, close fitting doors or drawers.

Hinges with closers

One of the easiest to install gas are closers, they simply inserted into the loop.

Take a screwdriver to carefully tighten the screws of the spring latching and fastening screws to the hinges or door. Due to the force zatyazheniya screw on a spring mechanism is modified activity. Bolted to the body may adjust the tightness of the cabinet doors.

CLOSER to loop 90

Installation for kitchen cabinets coils depends on the design of the hardware.

One of the easiest to install gas are closers, they simply inserted into the loop. For fixing the end of the loop, set closer into the hole until it clicks and the mechanism is ready for operation.

The door, the hinge with a door closer

Due to the force zatyazheniya screw on a spring mechanism is modified activity.

Do not loosen the adjusting screws until the end. This can cause the oil leak, damaging the furniture and the closer job.

closers cushion stops

It is much easier to establish a mechanism that is attached to the screws to the inside of the cabinet or one of the shelves.

Although the latching mechanism is arranged without too much difficulty, in case of failure it is easier to replace a new one, or else call the master.

Folding mechanism for low ceilings

Upon completion of the door closer installation requires adjustment.

If fittings beginning to creak, it is necessary to tighten up the screws on the hinges. Loop periodically lubricate all the mechanisms on clean soft cloth and soapy water. Do not clean the latching mechanisms soda, any other harsh cleaning agents.

Openers kitchen cabinets

If a narrow box (width up to ninety centimeters) possible one-sided installation.

Pay particular attention to the assembly and maintenance of terminal units for kitchen cabinets. Regardless of its advantages, the work will be of poor quality if the mechanism will be set incorrectly.

Kitchen cabinets with a lifting mechanism and a door closer

Mounting accessories for the pull-out kitchen drawers difficult, since they have a different design.

The mechanism will bring you the comfort of true a long time if it is made of quality material and will receive proper care.

Doors for Kitchen Furniture

Before installation, it is worth checking that under the rails there is free space the size of two millimeters.

VIDEO: Closers closing the facades of the kitchen