Regardless of the configuration, any sofa, as a rule, is large, because of which it is difficult to make in the room and move in the room. Therefore, before transporting natural question arises, how to disassemble the sofa? To do so may not only be a specialist, if you understand the mechanism of transformation.
To disassemble the need to: 1. Remove pillows and blankets. 2. Push the furniture middle of the room, or as much as possible to push off the wall; 3. Raise the seat to see the inner frame corner of the sofa; 4. Raise seat "sofa".
Fasteners are recommended in individual packages, mark and securely taped to one of the parts of the sofa.
To protect parts of upholstered furniture from moisture, dust, snags and abrasions, they are wrapped with stretch film.
In order to protect the armrests made of polished wood, it is necessary to wrap them with corrugated cardboard or use a thin foam roll, which is secured with tape.
Content
- 1 Required tools
- 2 How to disassemble the sofa book
- 3 How to disassemble the sofa
- 4 transport regulations
Required tools
Constructive parts of any of the sofa are joined by bolts, nuts, fasteners. To dismantle most of the models, simply spanner diameter Ø10, 12, 14. Some models are assembled using fasteners, which can only make out a special tool. In this case it is better to entrust the dismantling specialist, otherwise unsuitable for this tool may damage the frame or upholstery.
Disassemble the complex mechanisms of the sofa is not recommended so as not to disrupt the system.
Availability and sidewall construction depends on the model.
Corner sofas differ in structure.
Seat and backrest of the sofa can act as solid blocks or individual pillows.
Often fixing elements are hidden under the upholstery, so will need pliers, flat screwdriver to pry the brackets or pull studs. But attach trim back will be difficult, if not staple gun.
Dismantling of upholstered furniture on individual elements simplifies the loading and unloading allows compactly accommodate the load in the vehicle body for transport as well as helping to protect it from accidental damage.
Fasteners may be placed in plain sight or hidden under the upholstery material.
If a short piece is in the form of the sofa, it is equipped with a mechanism for lifting the seat, which is located under the box for linen.
Construction and the presence of the sidewalls varies depending on the model.
How to disassemble the sofa book
- The classic design is simple enough: the seat is put forward, and in its place is put back, it turns out sleeper. Models can have side cover. Modified form - evroknizhka, whose base is a box for storing clothes.
- To disassemble, it is necessary to raise the seat and inspect the inner side of the couch. Fasteners can be visible or hidden under the upholstery. If you find a second option, you'll need to trim to detach, and then reattach after assembly.
- To start bokovinki disconnected, if any.
- Then, unscrew the seat fasteners at least removed back.
- In evroknizhka seat and backrest are solid mechanism can only disconnect mechanism withdrawable.
Flat-book prior to transportation should be dismantled - because of the large dimensions of the piece of furniture is difficult to carry through doorways and down stairs, can not be carried in an elevator.
In most cases, the work is enough to use the open-end wrench.
Before starting the disassembly, inspect the inside of the couch, lifting the seat.
The short part is usually raised and there is a box for linen.
How to disassemble the sofa
As a rule, corner sofa consists of two beds, which are attached to the corner element. One element is less than the second, the main - is larger. There is another option, when the blocks are arranged perpendicular to the sofa. The backs and seats can be in the form of individual pads, and may be a single non-separable unit. Many models are equipped with a box for linen in short of the sofa.
- First you need to disassemble the side walls, if any. They can be attached or connected inside the tightening strap on the back side of the sofa. Also, depending on the model short piece can be attached to the long or short and long part are attached to the corner element. When viewed from the inside it will be seen.
- Disconnecting a short piece with it is necessary to remove the seat and backrest.
- The main part of the corner sofa versed depending on the mechanism of transformation. As a rule, it is a single unit of the seat and backrest, so detaches only box for linen. The corner element can be integral.
Disassembled sofa takes up minimal space in the back of the vehicle.
In the latter case, as is better to resort to the help of professionals who are carefully dismantled edge upholstery in the right places and in the assembly at the new location will attach special material back tool.
If armrests are made using polished wood, they protect the thin corrugated cardboard or foam material roll of polymer tape securing protection.
To simplify your task, you need to disassemble the product into separate parts, making it easier to load and unload, allowing convenient to place all the elements in the body of the vehicle.
transport regulations
All disassembled parts are packed necessarily, used corrugated cardboard, stretch film for protection, any waterproof material. Each item is individually packed, side walls are connected in pairs, all wrapped film, secured with tape. Wooden parts must be protected corrugated cardboard. These measures will help to keep the sofa against damage, dirt, wet, deformation during transport. Dismantle the sofa is easy, and that it is also easy to assemble, preferably in separate packages to stack bolts, nuts and sign with any part of it removed.
All parts of the disassembled upholstered couch should be wrapped in stretch film to protect against scuffs, dirt and wet.
After removal of all they must be stretch wrap film available sofas components.
Dismantling of upholstered furniture on individual elements simplifies the loading and unloading allows compactly accommodate the load in the vehicle body for transport as well as helping to protect it from accidental damage.
Corner sofa equipped with sufficient headroom and cumbersome design.
Each element disassembled separately packaged corner sofa (sidewall - in pairs).