By purchasing a new upholstered furniture, few people think that after a while it will lose its original appearance. Rub the fabric, armrests will begin to shine, may appear difficult stains or holes. Protect your favorite furniture upholstery or "give a second life" of the old easy. Suffice it to sew a cover for a sofa with his hands.
In the course of daily use furniture wears out the fastest.
Content
- 1 Advantages of products of own production
- 2 Design and construction
- 3 Basic sewing stages
- 4 How to tie a bag with his hands. Step-by-step instruction
- 5 decoration
- 6 VIDEO: how to sew a cover on a sofa with his hands
- 7 50 photo ideas how to make a cover on a sofa with his hands
Advantages of products of own production
- Compared with the restoration is a cheaper way.
- It is convenient to use and easy to wash.
- Ability to create a unique own design.
- The process does not require training and takes a few hours time.
- several models and experiment with appearance can be produced.
- If next to the upholstered furniture chairs are from different sets, which do not blend in, solve the problem of further cheholchiki made to them.
- Hand-Maid products are highly valued.
Fabric fade, sometimes wiped, and shows the spots, tightening, and others.
Since the cover will experience more stress on the joints, especially if the pattern was very dense, some joints can stitch twice.
Design and construction
Before you begin sewing, you must decide how the future should look like the product. For this purpose it is necessary to analyze the type of your couch. It can be double or triple, with soft wood or marginalia or without armrests. The most difficult - to sew a cover on a sofa with his hands.
Fabric fade, sometimes wiped, and shows the spots, tightening, and others do not pleasing to the eye, traces.
It is necessary to carefully measure all parts and details, to draw them in a reduced size on paper, after making layout, taking into account the direction of the pattern or fabric pattern, shared line.
Thus it should be composed of several rectangular elements and completely cover the surface of the upholstery. Fix it possible by means of elastic bands. Remove slack cords attached to the wings or braid, primatyvayuschiesya to the legs. Additional elements such as Krause and contractible in bows tape give elegance.
Conventional blankets or wraps only partially solve the problem - they get off, move out, in addition, they cover (protect) Only the front of the sofa.
On the Internet there are plenty of patterns to create patterns that resemble those offered in stores. So, if you decide to do covers for the sofa and chairs with their hands, the scheme will be. To set you can add a cover on a chair universal elastic band, with their hands linked.
Covers for sofa, chairs, armchairs - a proven way to update your upholstered furniture with a minimum of financial outlay and effort.
Look at the picture, how easy it is to turn any furniture into a work of art, using furniture covers.
Necessary materials:
- sewing machine with overcasting;
- sartorius tape or tape;
- line;
- pins;
- scissors;
- a piece of chalk or soap for marking;
- thread in tone;
- and a little patience.
Renovation - even with the most careful and accurate with regard to furniture, over time it begins to shine, the tissue loses color saturation, is wiped.
Most importantly, the need to sew covers on the sofa with his hands, it is the fabric. The material for the curtain should be strong and durable, easy to clean. it is recommended to use for this purpose:
- jacquard;
- flock;
- chenille with plush surface;
- pleated;
- microfiber;
- leather;
- Faux leather;
- natural or artificial fur.
Crucially issue updates and the full restoration of appearance may decide to trim waist, which is associated with certain problems and risks.
Removable covers for upholstered furniture not only keep skin furniture in pure form, but are also a number of other useful benefits.
To make evrochehol on the couch with his hands, will have to buy more elastic tissue.
Cases also allow only update the exterior, the outer surface, without the interference of the inner part couch, and thus saved the factory assembly of the sofa (chair), increasing duration operation.
Slipcover sofa, chair covers or chair in our days once again become very fashionable.
Basic sewing stages
The first step is to make measurement armrests, ottoman, seat and backrest. Then create the pattern and calculate the amount of material required. Each piece must be made seam allowance of not less than 7 cm.
- All items are transferred to the paper and cut out. The fabric can be spread out on a solid surface. Scheme material superimposed on and encircles the edge of a piece of chalk or soap.
- The cut parts grind lowercase seam, then better to try the product and secure it with pins. If it is small or loose, then you need to adjust the pattern or change the size of allowances.
- After the adjustment for the size of furniture, you need to remove unnecessary pieces of cloth, leaving only 3 cm allowances. Followed by sew and neaten the edges. Received veil better wash in cold water and iron.
- To create covers for sofas and armchairs with an elastic band with his own hands, will have to make a few additional steps to the lower edge. To do this, turn it inside out and draw a straight pencil line that will run gum. Then, you need to fix it parallel to the edge marking, capturing every 5-10 cm pins or thread. For sewing elastic bands need a sewing machine, allows you to create a three-tiered (elastic) seam.
In this case it does not require special installation - just enough to put him on the couch and fasten Velcro, buttons or zipper.
Get Gorgeous cape on furniture - quickly and easily.
How to tie a bag with his hands. Step-by-step instruction
To associate a universal cover for the couch with his hands, he will have to spend a lot of time and effort. The product may represent multiple interconnected webs associated with needles or a combination square motifs hook.
Protection of furniture - cases will be a boon, if the house is small children or pets.
Cover on the sofa - it is really convenient and practical terms, and in terms of the change of surroundings.
To create a knitted cover it needs to purchase a tight thread, as well as a working tool. Pattern and color is better to choose in accordance with the interior. You can use different kinds of thread. Just as in the previous case, it is necessary to make measurements of the furniture, to prepare a pattern, which should be followed in the process of knitting fabrics.
They are not limited to the use of furniture with all the family members, help maintain the original look of furniture.
Permanently retain the natural color of the upholstery and will not be damaged by pets claws.
If used for the manufacture of "motives", it is recommended to measure the area of the pattern and a square. Based on the dimensions required to calculate the amount of squares, skeins of thread.
They become a kind of barrier, preventing the appearance of puffs and scratches, animal hair does not stick and not sinking into the upholstery.
Your furniture will be protected from dust and clogging.
If the product is created from knitting fabrics, it is better to calculate in advance the surface area. Caught in the clothing store, pay attention to the label strings. As a rule, it indicates two digits corresponding knitting density. Knowing them, it is not difficult to calculate (your own or ask the staff) required number of coils.
Fabric stretch has a pronounced effect, restoring its shape after pressing.
On the basis of dense tissue with adhesive applied to many small villi from which is obtained velvety surface.
decoration
Decorate the finished product can be using bows, appliques or stripes. For registration armrests best suited decorative rope with a diameter of 1 cm. To focus on the bottom of the frame to help large braid or ribbon.
Covers on the sofa (chair) can dramatically change the visual perception of the furniture.
Isoprene layer plus thick pile to avoid puffs.