Often furniture after a time it becomes uncomfortable. On your favorite couch or appear pitted bumps. Blame - filler poor quality or incorrect operation of the furniture. If good-quality thing, do not get rid of it. You can restore it, buy a new filler is enough to change the upholstery, to find the right tools and spend a little time. The main thing is to choose the correct foam.
Internal filling of upholstered furniture is very important, because it depends on the convenience and comfort of products from it
Such a filler is often used in the manufacture of upholstered furniture - chairs, sofas, mattresses. Filling the furniture is of paramount importance, this will depend on how much you are comfortable and comfortable.
How to choose a foam for sofa depends on how often to use the sofa
Content
- 1 How to choose the right foam for sofa?
- 2 Key indicators of quality furniture foam
- 3 Assigning different brands of furniture foam
- 4 Features upholstery
- 5 Video: Foam Furniture VE5020 memory (Memory) - Memory
How to choose the right foam for sofa?
"Stuffing" the sofa for expensive brands consists of highly elastic foam and natural latex origin
That after restoration couch served for a long time, you must decide which filler is best suited for renovations. Foam has to comply with the conditions.
- The quality to be the previous excipient or above.
The process of replacing a filler in the sofa
- You intend to use the bed for sleeping, should take the foam thickness not less than 4 cm.
Only one-piece foam piece can be used to make the sofa
- The optimum density - 30 kg per cubic meter, it will provide the elasticity of foam for a long time. Padding and filler for the armrests and backrest should be replaced at the same time the seat. In this case, the foam quality may be lower, and save money.
Density is meant the weight of one cubic meter of the material when it is stored in uncompressed form
The shaped foam is a polyurethane foam sheet coated with the surface of the bulk pattern
About density mentioned above, and such factors as hardness and softness, are selected individually.
Different types of furniture foam designed for a particular type of furniture
There are several types of filler.
- Having an increased hardness.
- Solid.
- Soft.
- Increased elasticity with orthopedic properties.
- Increased elasticity, which has a greater comfort.
Various choices of foam upholstery, in rolls of varying density and thickness
If you buy furniture as a bed, choose the last two of these types. At a cost they will be a little more expensive, but perfect for sleeping.
Harvesting of the foam cushion to replace elements
Key indicators of quality furniture foam
When choosing a foam is first necessary to pay attention to its main characteristics - the thickness and density of the material
On the quality factor and the purpose of foam greatly influence the subsequent physiological qualities.
- The fill material - the higher it is, the longer the life of the material.
- Compression Tension - standard index in kPa under compression should be 40%.
- Strength - this property is checked for tear and elongation at him.
- Elasticity - the value proportionate to the stiffness, measured according to the heights of rebound in the time of testing.
- Residual deformation - when, after removing the load surface quickly takes the initial form, the more compact, the material is less deformed.
Of all the most interesting options is a foam having a "shape memory"
- Comfort, convenience and support factors - remains soft with a slight compression, the load is distributed evenly.
The molded polyurethane foam - a ready-made form of the details of the sofa
On a note. In determining the grade of the filler are the letters denoting his class, and figures - the first two indicate its density, the next two - tension compression. For example, the mark 2535 denotes EL: EL - brand high stringency, 25 - Seal 25 kg per cubic meter, 35 - Compression strength of 3.5 kPa.
Variety of foam density
Assigning different brands of furniture foam
Types and brands of foam for upholstered furniture manufacturing
Furniture foam ST (standard hardness) is one of the most common materials for filling pieces of upholstered furniture
Foam furniture El stiffened with equal volume has a greater rigidity than ST
There is a large amount of filler grades, which makes it possible to make the right choice not only ordinary buyers, but also to manufacturers of furniture. Consider the main ones.
| ST - normal (compaction is - 16-35 kg per cubic meter) | Due to the low prices, most manufacturers use it directly. But the life of this filler will be the year. This furniture is suited for garden. |
| EL - a high hardness (compaction - 25-40 kg per cubic meter) | The filler should not be used for upholstered furniture. |
| HL - solid (compaction - 25-40 kg per cubic meter) | This type is used for office and home furniture. For those who prefer to relax on a hard surface. For children, this filler can not be used. |
| HS - soft (sealing - 20-45 kg per cubic meter) | Furniture with filler is used for recreation and as a sleeping place. |
| HR - increased flexibility (sealing - 30-50 kg per cubic meter) | Perfect for upholstered furniture. Foam has a second name - synthetic latex, as this component is added in its production. |
| HR * - increased flexibility with a high level of comfort (sealing - 30-55 kg per cubic meter) | The best option in the manufacture of upholstered furniture. |
Foam HL4065 increased rigidity - a hard filler for seats and mattresses, indispensable in the production of intensively exploited furniture
Foam Furniture HS 3530 has soft properties and is suitable for berth
Latex foam brand HR - synthetic material with a high degree of elasticity
Features upholstery
Furniture in the operation becomes unsuitable for further use, and to purchase a new one, is not always possible. Basically upholstery erased, fade, tears - it all depends on how high-quality material. Sofas, finished leather, in a few months can come into disrepair. How to be in this situation?
Appearance sofas changed dramatically after restoration
To date, everywhere there is such a service as the restoration of upholstered furniture in the home of the owner, so that from an old sofa you can make a new one. After all, you not only to change the upholstery, but also will repair many of the details.
Sofa before and after the replacement of upholstery and filler cushions for seating
If you have a pet that ruined upholstery, this problem can be solved by the above method. Of course, professional work - not a cheap pleasure. Upholstery can be replaced with your own hands. As a rule, each part working separately. If you are not satisfied with these options in the shops you can buy a special cover for furniture - it will retain the original cover and increase its service life.
Beautiful Case for corner sofa will fit existing furniture in any room
Of course, to all the things you need to be treated gently, so if there are different spots, we try to remove them immediately. But this is not always the case, especially when a family has small children. For furniture coated with leather care is much easier than for textiles, - this material has a moisture repellent properties. Therefore, at the time of cleaning it is enough to wipe cloth.
Remove stains from upholstery available means
In this article, you have learned a lot about the foam, if you decide to change the couch in the filler, you will not be difficult to find a suitable option.
Foam - a modern filler for furniture
