Not only in the office, almost every home has a computer chair. It is convenient to sit behind a computer. But the chairs are often out of order, because we use them every day. It happens that some are used for many years, while others become useless within a few months. The service life depends primarily on how diligently you apply it. Weight category plays an important role. This piece of furniture provides a weight up to 120 kg.
It happens that some of the chairs are used for many years, while others become useless within a few months.
Thus, the air ceases to flow from the first chamber into the second.
If replacing an gas lift in the cold season, do not use it right away.
These chairs are made up of mechanical and hydraulic parts. If the gas is released at a time when you sit down, the chair is lowered, it is most likely due to gas cartridge. This becomes a major problem and hinders the work. It is unrealistic to do things when sitting in a chair uncomfortable. This can result in problems with the spine. It is possible that there will be pain in the back or develop scoliosis. That is why it is important that the chair was OK.
Weight category plays an important role.
On the floor you need to enclose anything, such as a newspaper to avoid staining.
You must make sure that the correct sealed piastres and swing mechanism, the lever can be bent.
Independently of its best not to be repaired, as it poses a threat to health, and perhaps life. It is better to buy a new gas cartridge. It is worth it is not so expensive. If you have enough masterovity, it is perfectly possible to carry out the replacement yourself. All you need to repair, you can buy in a shop where they sell these chairs. Of course, home renovations will save your home budget. Doubt that to cope with this work, it is better, of course, contact the experts. Optionally, take a chair at the address where the repair is carried out, as many experts go home.
These chairs are made up of mechanical and hydraulic parts.
Actually, masterovitym people will not be difficult to repair the chair on their own.
It is important to do everything carefully and not rush, then the chair will last a long time.
Chairs often fail, because we use them every day.
The list of necessary materials and tools
| Necessary materials | From the materials needed, of course, the chair itself, the gas cartridge, the appropriate diameter and length, spray lubricant (WD40), bearing grease. |
| Required tools | Of the tools needed: a vise, screwdriver curly, flat screwdriver, rubber mallet hammering a metallic, pipe wrench, tape measure. |
Independently of its best not to be repaired, as it poses a threat to health, and perhaps life.
This piece of furniture provides a weight up to 120 kg.
If at the moment you sit down, the chair is lowered, it is most likely due to gas-gas cartridge stepped
repair process: step by step guide
Often in such seats become worthless gas lift. This mechanism has two cameras, one is in the air. It sets in motion the lever, push it onto the valve. Thus, the air ceases to flow from the first chamber into the second. Therefore, the chair height can be adjusted.
It is better to buy a new gas cartridge.
It is unrealistic to do things when sitting in a chair uncomfortable.
That is why it is important that the chair was OK.
Before you begin, you must wear safety glasses, cylinder particles or grease can get into the eyes. If replacing an gas lift in the cold season, do not use it right away. Best left to warm at room temperature for a day. On the floor you need to enclose anything, such as a newspaper to avoid staining.
- First, using a screwdriver to unscrew shaped harnesses from rocking mechanism. Once you have turned the chair, it should be noted the front side of the mechanism, then unscrew the four bolts and separate the frame from the seat.
- Now you need to disassemble the gas lift. Take a hammer and gently begin to strike the swing mechanism at the base of lift gas from the cross. It is important not to bend the mechanism. If he could not knock down, it is necessary to squeeze the vise base gas lift and swing scroll mechanism.
- Now, to be separated from the cross-gas cartridge. You will need a metal planer. Using it, you can avoid unnecessary damage. To facilitate the work, from the bottom and from the top side of the cross sprinkled lubricant WD40. It is necessary to expand the spider rolls up and accurate movements knock the gas cartridge from the cone base. It is better to carry out this work with an assistant, one person to do it inconvenient.
- Change came the gas cartridge to a new one in disrepair. Paste it, make an effort in the opening of the cross. Make sure the gas cartridge fits the diameter of the casing to the crosspiece in the gas lift dresses before you connect it to the seat.
- We attach the mechanism to the seat swing with four bolts. It is important to see to it that the front side of the mechanism and the seat fit. Turn over a chair and put on gas lift mechanism on the swing. Now paste in a gas lift mechanism and push the stop. We check that all done correctly. We sit down on a chair and look at how the gas lift.
All you need to repair, you can buy in a shop where they sell these chairs.
If you have enough masterovity, it is perfectly possible to carry out the replacement yourself.
Doubt that to cope with this work, it is better, of course, contact the experts.
You have completed the repair of a chair, raised it, but difficulties with the gas cartridge left? Perhaps he was substandard. Before returning back to the store, you need to check to see if holds the lever from tilting mechanism button-gas cartridge. You must make sure that the correct sealed piastres and swing mechanism, the lever can be bent. If everything is in order, it is necessary to replace the gas lift.
Optionally, take a chair at the address where the repair is carried out, as many experts go home.
Before you begin, you must wear safety glasses, cylinder particles or grease can get into the eyes.
It is important not to bend the mechanism.
Actually, masterovitym people will not be difficult to repair the chair on their own. It is important to do everything carefully and not rush, then the chair will last a long time.
Often in such seats become worthless gas lift.
To facilitate the work, from the bottom and from the top side of the cross sprinkled lubricant WD40.
It is better to carry out this work with an assistant, one person to do it inconvenient.
