Wardrobe in the hall: production versions with their own hands

The entrance hall is defective if it is not of a good spacious closet in it. It is not necessary to buy it, because the manufacturing process is quite simple.

The advantages of this option:

• you can choose any project, the most suitable hall in style parameters;
• designers for the development of individual projects do not have to pay;
• material costs are minimal.

The main thing is that the furniture in the hall was spacious, compact, neat, not pretentious.

Details that need to consider when designing.

• must be precise dimensions;
• the presence of the bar to place the hanger;
• hooks for clothes on every day;
• one or more shelves for hats;
• cabinet for shoe storage.
• mirror;
• small drawers for small items (gloves, scarves, etc.).

Needed to work tools and materials

To assemble the rack in the hallway with his hands, the following tools and supplies prepared in advance:

• guides for installation boxes;
• tires, if conceived "coupe" with a sliding system;
• hinges and handles for doors;
• clothes hooks;
• calculated in accordance with the project number of nails wood screws, self-tapping screws;
• needs and wooden fittings: SCREW, dowels for the assembly of furniture;
• corners of furniture (metal, plastic) and cap;
• not do without a standard set of tools (screwdriver, drill, electric jigsaw, saws for wood, furniture key for SCREW, mallets, clamps, and the building polygon level).

Materials better to take inexpensive, it is easy to handle. For example, to make solid wood furniture does not take even the manufacturers with experience.

• Chipboard is the most viable option for the future of the product, made with his own hands. This material is cut into elementary, process. Building material weighs a bit, so do not need to be strengthened fasteners or fittings. Important fact - the low cost.
  

  Chipboard cabinet with mirrored door

• Plywood - lightweight, durable and more dense material from which will come out curly detail and slit patterns.
  

  A roomy wardrobe eco plywood

• MDF may be subjected to various kinds of processing (dyeing, tinting, and the like stain treatment. D.). It is less durable than plywood.
  

  Wardrobe and cabinet made of MDF in the hallway

• Fiberboard must be purchased for the rear walls of the elements.
  

  Fiberboard to the rear cabinet wall in a hallway

• Wooden beams for the frame structure.
  

  Wooden beam frame for a homemade cabinet

• Eaves boards (usually pine).
  

  Eaves (pine)

• Drywall for equipment interior space built niches.
  

  Homemade closet of plasterboard in the hallway

The most responsible need to approach the size of the removal. Assuming rendering all subsequent work will be difficult or even fail. There are a variety of ready-made options with suitable dimensions. If the finished drawings are not suitable, and drawing skills frail, it is necessary to draw for this stage specialist who conceived projects with the right dimensions. Cut materials and make edging of face parts better in the store, where the building material is sold. Store services are inexpensive, but the time it saves significant.

wardrobe assembly

This invention relates to a built-in, it is easier to produce, as the details do not need to calculate and shearing. The complexity of this option is that must take into account the features of walls and floors.

The ideal solution would be for such furniture niche with a sliding system, equipped with several shelves for hanger crossbar. Mounting the valves in this case is the same as that of interior doors (involved wall and floor).

Very often sliding wardrobe made in the corner of the room. This model does not have one side and the rear wall (and in some cases no floor and ceiling).

The base consists of a wooden frame, which consists of a pair of frames (front and side) collected on screws or nails. If the project envisages improvement shelves and partitions, in targeted areas of the frame must be secured transverse rails.

instruction

To partition walls, floor, ceiling, in places where it will be installed frame, drilled holes for fastening elements. It is recommended to place a paper clip also mark.

Freeze using dowels front frame on the wall and ceiling. Check it vertically, using the level.

Set side frame.

The resulting niche on the walls are fixed slats of wood destined for the shelves (shelves cut out of plywood or particle board). You can not fix the shelf, placing them on a rack or secure with nails.

Bock sheathe plasterboard or laminated chipboard. Drywall paste over or stained. Side portion that will contain the crossbar with hangers must be durable (chipboard, plywood, but not drywall).

The final step - installing sliding door. Top and bottom rails are mounted respectively on the ceiling and on the floor.

It is very important to follow the exact size. First, try to set the layout of the future of the door. Take any part of, the height of which is the same as at the door, and set into the top of the bus. Check the verticality of the value and mark the site where will be fixed lower guide. The door will first need to embed, just pressing on the upper rollers, and then - to the bottom of the bus. To adjust the position of the door leaf is used adjusting screws. When properly installed door moves smoothly, without interference.

The above example is suitable for a simple construction of small size, consisting of two halves. With good area hallway, there is a possibility of making a bigger model. Then the frame of the bars will not work. It is better to make the basis of particle board and the elements of its "bond" with a common floor and ceiling. This method will allow to put in a niche apart from the shelves and rod for hangers and drawers for more details and other details.

Assemble such a product would be as a designer on the dowels and SCREW. For this pre fittings necessary to drill holes. All this must be done particularly carefully and patiently. All the fixings for angles of day are kept in the clamp.

Assembling the corner cabinet

It is easy to be done by hand corner module. For the stability of the modules are often made of durable solid materials (particleboard, plywood). These products come in several forms:

• triangle;
• L-shaped;
• trapeze;
• five walls.

The most suitable for the hall is five walls.

• The drawing is labeled dimensions and areas of future fixtures. Shelves mounted on the SCREW.
  

  Drawing corner cabinet with dimensions

• Jigsaw or hacksaw need for cutting chipboard pieces.
• Kromkovat necessarily ends.
• Holes for dowels, drill installation on one panel with "face", but on the other - with the end. Also it is necessary to drill a place SCREW fasteners.
• Fluff dowel with glue and assemble the side pieces. Once the glue is dry, fix the shelf to SCREW.
• Install hooks.
• Stuck on the side of the mirror.

Assembling the cabinet for shoes

This is an easy process, because all that is needed in the sale of building materials store.

• Order in size frame made of chipboard.
  

  Detailing pedestals for shoes with his hands

• Buy "facade", fittings, base for plastic tip-up shelves.
  

  The markup for the holes

The structure includes: the outer frame, several shelves with baffles. The width of the structure depends on the maximum size of the shoe, and height - the number of shelves.

A good solution would be to connect the shoe cabinet with elements of the chest. Or to put it in a closet or a corner compartment in which there are open facades.

On the Internet, it placed a lot of diverse information on how to make the closet in the hallway with his hands. Therefore, after reviewing all the available data, it is possible to successfully construct the most appropriate model.

Video: wardrobe in the hall, with his own hands

Photo ideas closet in the hallway for the manufacture of their own hands: