The modern market of accessories is willing to offer a wide range of furniture hinges. hinges used since Soviet times. To date, they have undergone a lot of modifications. Now the products are characterized by high reliability, outstanding performance, long service life. In this article we will look at the main types of hinges for furniture and features of their installation.
The modern market of accessories is willing to offer a wide range of furniture hinges.
Try the door to the cabinet.
Using screws, attach the mounting bracket.
Content
- 1 types of loops
- 2 mounting tool
- 3 marking
- 4 Installation of furniture hinges
- 5 How to install furniture hinges
- 6 attach the door
- 7 VIDEO: How to quickly and easily install the furniture hinges
- 8 50 photo ideas how to install furniture hinges
types of loops
The main purpose of furniture hinges - supporting facade products when opening and closing. various kinds of loops (in the table) are used for different tasks. Let us examine them in more detail.
types of loops | Application area |
· invoice | Hinged tables and cabinets |
· internal | small tables and chests of drawers |
· polunakladnaya | cabinets with three or more facades |
· 45 degrees | corner cabinets, pedestals |
· GALLERY | cupboard under the sink |
· robot | corner kitchen cabinets |
· Grand Piano | Tables Notebook |
Now the products are characterized by high reliability, outstanding performance, long service life.
Successful consolidation hinge means one thing - it's time to begin to install the door.
To remove the slot, tighten up the second adjusting bolt.
Overhead products are the most common. Their name is derived from the method of installation - they are superimposed on the side wall at a right angle. Inner loops include the installation of the facade within the housing. They have a characteristic "hump".
The main purpose of furniture hinges - supporting facade products when opening and closing.
You can start hanging of the facade.
Polunakladnaya accessories helps to impose on the sidewall of two or more fronts. If the door should be mounted at an angle of 45 degrees, then you must install the furniture hinge 45 °.
Overhead products are the most common.
In this installation process is finished.
GALLERY furniture hinge is attached to the bezel. Type "robot" can be opened at an angle of 175 degrees. It is indispensable for the construction of complex shapes. Piano type used in laptop tables. It helps to raise the tabletop.
Inner loops include the installation of the facade within the housing.
Fixation products must be reliable.
mounting tool
In this article we will look at how to install furniture hinge overlay type. To work you need to prepare the following tools:
- Furniture hinge;
- end mill (diameter 35 mm);
- screwdriver;
- pencil;
- line;
- building level;
- screws (4x16 mm).
Polunakladnaya accessories helps to impose on the sidewall of two or more fronts.
After the formation of the groove proceed to securing loops.
marking
In order to carry out the installation of the furniture hinge properly, you need to make a layout. Use an ordinary pencil, a ruler and a builder's level. Height from the front edge of the back 12 cm. Step between the eaves should be fifty centimeters. By width of the indentation from the edge should be 21 millimeter. Installation of fasteners close to the shelves of the cabinet is prohibited. Such an arrangement will prevent proper functioning of the structure.
GALLERY furniture hinge is attached to the bezel.
Drilling cutter - not for beginners.
Tip! If the facade is heavy, it is necessary to install two or more loops.
Piano type used in laptop tables.
Use any unnecessary piece of lumber.
Installation of furniture hinges
To carry out the correct installation of furniture hinges help well sharpened cutter. It will not damage the surface of the structure. You just need to insert the cutter in a drill and make holes according to the markings. Groove depth - 12.5 millimeters. During operation, the drill is held strictly perpendicular. This will avoid chipping. Another rule - Drill should not go outside.
Drilling cutter - not for beginners. If the experience does not, it is best practice. Use any unnecessary piece of lumber. It take a few holes required depth.
To work you need to prepare the tools.
Another rule - Drill should not go outside.
How to install furniture hinges
After the formation of the groove proceed to securing loops. They need to be inserted into the hole, align the building level, fasten screws. Fixation products must be reliable. Each screw should be tighten until it stops. In this installation process is finished. You can start hanging of the facade.
In order to carry out the installation of the furniture hinge properly, you need to make a layout.
During operation, the drill is held strictly perpendicular.
attach the door
Successful consolidation hinge means one thing - it's time to begin to install the door. Try the door to the cabinet. Using a pencil mark the location of attachment. Using screws, attach the mounting bracket. On this door installation is complete. But do not rush to hide the tool. Products important to be well adjusted. Regulate them in three ways: horizontally, vertically, depth. If the surface is necessary to press the housing or positioned above or below the door, tighten up the foramen ovale. To remove the slot, tighten up the second adjusting bolt.
Installation of fasteners close to the shelves of the cabinet is prohibited.
To carry out the correct installation of furniture hinges help well sharpened cutter.
You just need to insert the cutter in a drill and make holes according to the markings.