How to care for acrylic bath in the home: the rules of care, cleaners and scratch removal

Acrylic Bathtubs today are becoming increasingly popular subject of plumbing. This is easily explained by the variety of shapes and sizes, as well as the ability to manufacture bath under the individual design of the room.

Thanks to its unusual shape and dimensional characteristics acrylic bath is able to satisfy the needs of even the most demanding customers. Today, cast iron bathtubs losing its popularity due to the fact that the material in them too heavy, steel is using too noisy.

Benefits baths Acrylic

Acrylic - polymer material with excellent mechanical characteristics. Unlike item from iron and steel, it has a number of advantages:

• affordable price;
• due to the peculiarities of this bath material may be made of any shape, color and size;
• insulating properties: acrylic allows longer retain heat;
• aesthetics;
• antibacterial effect.

But there are drawbacks. There is an opinion that the acrylic - pretty whimsical material, so for him It requires certain care.

Wrong choice of detergent It leads to scratchingAcrylic surface tarnish lost antibacterial properties inherent in this material. It is indeed the case, but with proper care and observance of some simple rules will have no problems more than any other plumbing fixtures.

Which means you can not use:

1. Washing powders, foams and cleaners containing abrasive. Their use can lead to damage to the acrylic surface and scratches.
2. Means for washing bath with acetone, alcohol and ammonia and chlorine. After a single use of these agents bath surface becomes cloudy, and prolonged exposure to these substances acrylic corrode.
3. Sponges with a rigid surface will act in the same way as the abrasive.

The basic rules of care for acrylic bathroom allows for a long time to maintain its appearance and useful properties. In fact, there are not many, and they are easy to implement.

care Regulations

Preferably not bathe pets acrylic tub, since they may scratch the surface. If you need to use it is compulsory special rubber mat. Such as carpet underlay under the best pots and other household items, when used in the bathroom.

It is desirable to avoid contact with the very hot water or boiling water to the acrylic surface, as this material is resistant to high temperatures. After each use, the bathroom should be wipe it from contaminationPreferably cotton towel dry.

should be used special funds caring for acrylic bath, which can be purchased in the department of household chemicals. As a rule, it is a cream-gel that gently cleans and cares for the plumbing of acrylic, as well as help to get rid of the rust appeared and lime deposits. Allowed to use home remedies for cleaning the bath.

Care at home

In addition to the use of a special household chemicals may provide the proper care of an acrylic bath, using tools that are always at hand. The question arises - how to care for acrylic bath using folk remedies.

• Soap and / or shower gel - does not damage the acrylic surface are gently and carefully.
• Many housewives favorite soda - allows even remove stubborn dirt, acts as an antibacterial agent. Apply baking soda on a damp, soft sponge, which is then gently rubbed surface of the bath. Wash off after a few minutes of baking soda with water.
• At home, you can use toothpaste or an ordinary washing powder - these tools allow you to clean the bath of yellow spots. Powder and toothpaste should not contain granules that may scratch the surface.

Formulations acid

These means usually used for removing the problems have emerged: rust, aqueous lime stone or plaque. Dosing: full bath filled with warm water, pour it into 0.5 liter of citric acid or vinegar and leave 12 hours.

After this time, the water drain, rinse the surface with water and wipe dry cotton towel.

If the time for cleaning is not, and lead a bath in good condition need faster, it is possible the following method: moisten a soft cloth in warm ksiloty solution, gently wipe the surface and leave for 15 minutesThen wash the solution with water bath and wipe the surface dry.

cooking pasta

Improvised at home can make a special paste acrylic surface and use it for continuous cleaning baths without waiting problems.

Composition: soap without additives (about 15 g), 0.5 liters of hot water, soda (approximately 100 g), any optional flavor oil (lavender, orange, etc...) - 10 drops.

Making simple - soap rubbed on a fine graterHot water pour chips and leave until completely dissolved (approximately 10 to 20 hours).

Then Add baking soda, Stir and add a variety of oil, if desired. Pasta is ready! It can be used for constant maintenance and in the case of heavy soiling layer composition is applied to soiled portions or the entire surface. After 30 minutes, rinsed with water using a sponge bath and wipe dry with a towel.

How to remove scratches

Most likely, one scratch on the surface still appears. Is it possible to do something in this case or the surface is hopelessly flawed?

Not too difficult to remove scratches on the acrylic bath. Acrylic - a unique material, scratches on it is easy to appear as easily and eliminated.

1. Small scratches simply polish. Do so without the aid of any special devices - using a piece of felt or abrasive or fine grain sandpaper and then polished by liquid means.
2. Deep scratches require more serious approach. To eliminate them, will have to arm themselves with a special tool - liquid acrylic, which can be found in a hardware store.

The tube means comes complete with a special shovel. With it applied to the injury site liquid acrylic. after drying, reconstruction site polished as well as minor scratches. After all these procedures, the injury is almost impossible to notice.

Given all the advantages and disadvantages of acrylic surface, particularly care for it, you can do It concluded that acrylic is a fairly versatile material and requires a very careful to attention. Suffice it to to comply with certain rules and take care of the time, and acrylic bathtub will last you a long time.