A furnace for the bath Tunguska

click fraud protection

To equip private baths / saunas in the countryside hacienda or even at their summer cottage, you can select the oven "Tunguska", working with wood. Heating unit is easy to use, compact, easy to install and operate and decorate almost any interior. Suitable for heating the sauna, steam room, even if not very well equipped.

"Tunguska": design features of bath furnace

RICE Oven "Tunguska"

"Tunguska" consists of high-strength and heat-resistant chromium steel - corrosion inhibitor content is 13%. So that all components can withstand severe physical and thermal stresses. setting elements are protected from corrosion processes under the influence of moisture and corrosive liquids.

The surface for the pair of furnaces consists of iron sheet 2.5 mm thick, so that it heats up fast enough, that does not affect the operational life of the furnace. Chrome-steel effect prevents oxygen burning and oxidation of hot steel in the furnace. thanks cast iron grate there is a uniform combustion flame in the furnace - heating intensity can be adjusted without any problems.

Bucky different furnace types

If necessary Tunguska can be equipped with water heating. The design can be of two types:

  • Buck type samovar implies the presence of a container in which water is heated. Heating occurs due to heat hot gases from the combustor. A tank mounted on the pipe-chimney, allowing heat the water, including the expense and waste gases. An additional advantage is the reduction of the level of condensate in the tube.
  • Oven with a heat exchanger circuit. Due to this, the water tank can be placed in a convenient location where it will not disturb anyone.
The stove Tunguska - an overview of the characteristics of
"Tunguska" with heat exchanger

Steel casing "Tunguska" causes the following functions:
  • Indoor air is uniformly heated due to convection ducts.
  • The casing protects the room from the infrared radiation, the source of which is a red-hot furnace.
  • With a conventional oven, you can earn burns. But thanks to the thermal insulation in the Screen "Tunguska", which prevents overheating of the furnace for the bath surface can be relaxed.

In addition, the casing has a silicon staining. It can withstand any changes in temperature and thermal load.

Appearance and Performance

It has the shape of an inverted pyramid, due to this can heat a larger volume of stones. It includes a deep heater and heated to 500 degrees Celsius. To clear the "Tunguska" with soot and grime, you should use a special powder that is sprinkled with red-hot coals. It is desirable to use such a powder when the heater tank and heater cleaned of extraneous elements.

Lineup heaters is wide enough. For example, the classic version furnace weighs about 50 kg, but the power of such a model is large enough. Even if in the bath will be opened the door handle insert and warms your room in about an hour. The second variant, weighing 62 kg, more powerful - calculated on the premise cubic capacity of 20 cubic meters.

With regard to the operation of the model, before the first use should make sure that the tank installation, the chimney and the furnace itself is made right. So, at the first ignition doors and windows should be opened, it is necessary to heat the furnace itself for an hour at full furnace and tank, but the empty stove. After the burn through the wood, it is necessary to release the tank and to ventilate the room. After complete cooling can be spread stones - before that they should be thoroughly rinsed. By the way, the stones can take is not any, and specially designed for the "Tunguska".

The stove Tunguska - an overview of the characteristics of
"Tunguska"

advantages of the equipment

  • Long life
  • Aesthetic appearance.
  • When firewood furnace environment is not polluted
  • The large volume of heaters and convection system provides a fairly soft steam.
  • Install and connect the heating utanovka can own - the model is delivered fully assembled and only needs to be connected to a chimney system.
  • Ergonomic shape.
  • Due to the screen with a heat-insulating effect can be to place the model in a convenient place for the user.
  • Using external heating channel, you can make the furnace in the steam room adjacent to the room - this will minimize the amount of carbon monoxide in the steam room of the furnace.

safety instructions for the heating system:

  • It is prohibited to place objects close to the surface of the furnace;
  • It is forbidden to dry things around, even if the surface is almost cool;
  • Do not store near combustible materials or kindle their stoves;
  • Clean the chimney soot should be not less than once every two or three months.

Installation instructions "Tunguska"

all regulatory distances to be observed before the actual installation:

  • door - wall - not less than 125cm;
  • ceiling - the top of the furnace - not less than 120 cm;
  • the outer surface of the chimney - the wall - 50cm.

Install water heating systems

The stove Tunguska - an overview of the characteristics of
Scheme Fitting "Tunguska" has oven with integrated heat exchanger
The stove Tunguska - an overview of the characteristics of
Scheme Fitting "Tunguska" furnace heat exchanger samovar

Alternatively, the water heating tanks can be taken to another room and set, for example, in the sink, not in the steam room. Also, the design allows you to rotate the samovar-type heat exchanger in the opposite direction by using union.

Tip: when you select an appropriate model should be paid great attention to the tank water, or rather, its volume. The calculations are carried out on the standard 7-10 liters per person, plus the same amount for brooms and zaparka.

No less important fact model selection when buying a furnace for a bath is its color - a wide range of colors gives the customer the opportunity to choose the appropriate option under the conceived interior.