Articles made of plastic bottles with their hands 100 photo ideas

Plastic bottles have long entered the daily life of every person. This is due to their practical use. They do not break, they are light weight, any size, small cost. Such characteristics contribute displacement of glass production in favor of plastic.

Shelves crammed with milk, water, sodas, and other useful liquids spilled in the plastic bottles. Everyone, making purchases, bring such products home. However, debris accumulates gradually, among which the bottles are most inconvenient waste. The trash they will not put a few pieces occupy the entire volume. Just do not need to store them, and on the street, they are scattered everywhere. plastic has become a global problem. However, there is a good outlet, it is possible to use efficiently. An unnecessary thing can be the subject of decor material for all kinds of crafts.

Especially plastic bottles as material for handicrafts

Releasing capacity of different materials, such as polyethylene, polyethylene terephthalate, polyvinyl chloride (PVC), polypropylene, polystyrene. The substances have a long period of expansion, which can reach five hundred years. However, these characteristics are taken into account and the practical use of raw materials. From it even build homes, barns, greenhouses. Apply for the holiday needs. Create crafts, given the characteristics of the material, which are as follows:

• Raw supple, well bent, cut. These properties allow you to create various domestic and street construction;
• Combining different bottle sizes may obtain products of any form;
• In addition to the tank itself, are also working with lids. Of them can make a box to decorate furniture, to create a mural, painting, lay out garden paths;
• For working with material fit toolbox, which is in every house: a knife, a pen, pen, needle, glue, matches, stapler;
• Plastic is no different ecological properties, but is relatively safe raw material, which allows to make him toys.

Gift wrap

Homemade is just the work does not take much time. It will allow to decorate gift, souvenir, cooked for friends and relatives. Plastic containers - a good material for packaging. Without much effort, you can pack a nice fairing, for example, put the cupcakes in a bucket of mayonnaise, while removing the label, decorate it with conventional inks.

If you want to impress, then made more complex products. From the cropped on both sides of the bottle can be easily obtained to imitate a piece of candy, while it can be filled with fruit and citrus fruit, different sweets. Combining two trimmed bottoms, manufacture small box that resembles an apple. More difficult to create a square, rectangular boxes for large gifts. It will suit lovers of handicrafts. To produce a bright, decorated packaging required:

• Plastic bottles;
• Scissors, stationery knife;
• Simple pencil, pen, measuring instruments;
• for decor accessories (belts, jewelry).

Container for lunch

Attend daily dining room, café expensive. We have to hire the food prepared at home. It is often the question arises, how does it bear. There are many options, the best of which is the lunchbox. It will allow to have on hand a complete meal. Create a container from a plastic bottle is not difficult, at the same time it will be an original look. Consider the following workshop:

1. Take a six-liter bottle is empty. It is desirable to select a capacitance with smooth surfaces. Ribbed - worse than the cut, apply the layout.
2. Marker to mark up as follows:
   - draw a line parallel to the base line at one of the large surfaces of the area, which takes place before the start of the bend to the neck of the bottle;
   - on the edges of connections with other planes on both sides hold the line down, not leading to the lower base of ten centimeters;
3. Delineated at this level until the bottle in a circle plane with the upper mark, is then received over the lines in each plane do semicircle up to four centimeters.
4. Markings on the future of the product cut off office knife.
5. On three sides, which were marked by semi-circles, bends "ears", the fourth side, which offers direct large plane will serve as a lid. In its upper part in the middle of doing the hole, wherein the elastic anchoring (loop).
6. Sew a button, on the side opposite the cover. It will serve as a fastener.
7. The resulting product can be zadekorirovat special inking tape.

universal basket

Shopping in everyday understanding, it is designed to store, carry things. This wickerwork. It looks like an ordinary box, or different razvalistym riding. A very useful thing that can serve as hand luggage, a container for collecting dirty linen, home decor items. Plastic can weave such a product in the home, without spending significant funds. You will need paper, ruler, glue, scissors, plastic waste material.

There are several ways by which are baskets. The most simple - weaving areas. To this end, the bottle is cut on both sides and put on their labeling. By partitioning, from the obtained preform is cut strips, which are woven together. When you need to make the basket bottom, attach the handle.

The second way - checkerboard weave. Often it requires additional forms, such as a cardboard box. Band in this case is cut differently from the bottle are only one, a long ribbon. Further inverted cardboard box base upward and the bottom of the basket weave, and then proceed to its side faces.

Bags and shopping bags

Typing a couple of dozen of plastic, bottles, you can easily turn them into an original bag. It may consist of identical squares, rectangles, ovals, or combine different geometric shapes. The size of the square billet depends on a plane, resulting from a bottle. Consider a simple master-class on the creation of bags:

• Take a few two-liter bottles of the same color and prune them from two sides;
• The resulting cylinders are aligned, folding them in half;
• From blanks can be cut squares, rectangles, the maximum size of which will be for the first 6x6 and 10x6 cm for the second;
• Puts obtained pieces on ordinary sheet in the box, and retreating by 0.5 centimeters on each side, soldering Burn holes circularly geared to one cell;
• Using a hook tied with each side of the thread;
• The resulting element is connected with the same yarns in a single plane, whereupon the handle fastened thereto, using special clips;
• The bottom of the bag and side portions are prepared in the same manner;
• By combining all the elements together to give the final product.

Much more difficult is the case with a shopping bag. For its creation, the bottle is necessary to dissolve into thin strips, of which subsequently makes a pretty strong threads. Require special facilities and equipment. Further, using a hook, knitted mesh. For convenient carrying handle can be put on the flexible tube.

Diy bathroom

human imagination is limitless. Even in the bathroom can be useful plastic bottles, not only for the storage of water. Of them can make interesting crafts. Consider a few original ideas:

• Interesting toothbrush holder and toothpaste. This will require a bottle cut on both sides, glue the top and bottom of it. Cut off one pair of wide and narrow necks of other plastic containers. Then glue them to the product, to paint it. The wide mouth to put the paste into the narrow - brushes.
• Mat covers. We will need the silicone adhesive, rubber base, degreasers, colorful cover. The process takes a little time. It is necessary to degrease the base and the cover, smear glue base. Glue the lid can be placed randomly or create a pattern, pattern.
• Hanging shelves of bottles. You will need eight five-liter bottles to get the design in 2 rows of 4 cells. Cut the upper part of them. If the container contains a label, remove them. Next on the elements located at the edges, making the holes at the top and bottom of the bottles to match. A plastic container glue into the holes we start rope stretch them in an analog outboard swing.

You can also do: a basket for storage of dirty linen; mirror, framed in cut bottoms of bottles, painted in different colors, imitating emoticons; decorative toy in the form of fish, boat.

Ideas for organizers

From a small plastic bottle you can make a nice organizer for office. Depending on the type of packaging, it may be desktop or wall mounted. Do not rush to dispose of empty bottles of shampoo. Bright plastic can become the raw material for a fun organizer. First, you must cut the neck of the bottle as close to the opening portion, to identify places of future shaped sections. Cutting out the plastic from one side of the fence, you can make a funny monster. The decor fit the most diverse - fabric, foil and paper. You can use any free adhesive. Hanging organizer attached to the wall in the double sided tape.

Create order on the desktop, you can use roomy and convenient organizer of several cells. We make it six large plastic bottles of any non-toxic liquid. Better if the plastic is tight. Getting started with the separation of the bottles into two parts. The top half of the lid to put off to the side, we do not need. The cylindrical container is placed in two rows and wrap around the perimeter of any piece of beautiful fabric. The bottom of the organizer can be closed rectangular segment or leave as is. You can use the lace, beautiful laces, satin ribbons to the top edge of the decor.

The height of all containers organizer with cells must necessarily be equal. If cuts out different, they must trim.

Boxing paper

For storage flipcharts, sheets A3, packaging paper, you can use ordinary plastic bottles. To make the original cylindrical box, need two PET containers with lids, scissors, a rectangular piece of cardboard, glue gun, acrylic paints and colored paper clips for decoration.

On both sides of paperboard necessary to make openings in the form of caps and workpiece beautiful pasted paper. Spray paint the lid from a container and glue to the holes in the cardboard. While drying rack can take the foundation box for papers. Cut off from the bottle tops, pieces of adhesive tape pasted in a chaotic manner and decorate acrylic. After drying and removal of adhesive tape to get the original image space. cylinder rim can be decorated with colored paper clips. Finished boxes fix the stand using hot glue.

Jewelry made of plastic from bottles

Recycling of plastic - the original contribution of every person to the protection of nature. Empty containers of any size can be used as raw materials for the original decorations. There are many simple ideas that can unlock the creative potential beginners handy people. Look beautiful these ornaments of PET bottles:

• Exquisite necklace. This masterpiece is created from pieces of transparent, colored plastic, candles, wire and beads. Carved flowers of the bottles must be heated over a fire, wrapped edge with forceps. On a wire strung beads and two colored elements. The composition of simple parts symmetrically and close to the base primatyvaem necklace.
• Suspension. Of green or blue beer bottle should be cut three different square from 1 cm to 3 cm, and give them the shape of a flower. Every detail is placed on the button and melted edges. Connecting parts and anchoring bead beautiful. In the next stage cut-droplet suspension, pierce the perimeter holes and twist around the beads. Blue forget-me putting a to the base and connect the narrow ribbon.
• A bracelet. Size depends on the bottle diameter. Cut the preform rings and fused sharp edges on the iron. For decoration you can use any fabric, beads, textile figurines of animals.

Bag-apple

Due to the shape bottoms, plastic bottle is perfect for making decorative crafts - jewelry boxes, apple. It can be used to store useful things, or as a decoration of a garden site.

To create such a decor require two bottoms of the bottles of one color and two plastic rings - 5 cm wide and 1 cm. From green leaves and cut container natsarapyvaem awl veins. Hot awl pierces one of the bottoms, insert a narrow band, and part with the leaves. Artificial stalk fix glue. Then connect the two halves and fasten with tape on both sides. The edges of the decorative box pasted over with a satin ribbon. That part is not lost, you can assign them a cord or thread.

Butterfly for decor

The lack of bright colors in the interior could be successfully restored with the help of decorative needlework. Suitable and available material for creative activities - plastic bottle. Graceful butterflies, hand made of plastic, will complement any outdoor track.

The first step is to get rid of the top and bottom of the bottle. Will work only with the cylinder. Spreads plastic iron over the paper and cut out the butterfly and to circled pattern. The blank is ready for painting. Felt-tip pen to mark up and paint the paint on glass. With the help of wire and beads, you can make legs and antennae.

Flowers and Bouquets

Create floral arrangements and bouquets can be of any plastic container. Fit jars of Actimel, from Kinder Surprise eggs, pet packaging of juices and the usual bottles of drinks.

Of the several prepared halves with a neck is a beautiful bouquet of daisies. Make it very simple. Plastic preform should be cut into thin strips and twist each element of the scissors half. To give the flower the volume, you can separate the twisting part of all parts and glue them to the center.

Of plastic containers of chocolate eggs will perfect flower meadow. From colored halves cut the central strip, customized products at the same size. In each half make the hole, forming a toothed rim. Stem bright tulip will serve cocktail tube and leaves bits of plastic packaging from the juice. Finished flowers can be placed on a stand, emitting a clearing or in a decorative vase, a bottle of wine. You can also make a beautiful needle bed.

decorative planters

The old five-liter bottle can be used as pots for flower pots or storage of household utensils. To new items cottage interior has an attractive appearance, it is necessary to refine. You can simply decorate with foil, shiny powder or colored paper, but you can use an interesting technique of weaving food packages.

At the bottom of the water container for making vertical strips, of a thickness of not more than 2 centimeters. Prepared polyethylene yarn is passed between bottles strips staggered. If in the process of working with unusual materials appear uneven, you can remove them, fusing lighter. Interesting pots can be left on a windowsill or hang on the wall, missed the ribbon between the weave.

decorative flowerpots

There are several variants of vases from plastic bottles. Suspended products made of closed 2-liter containers, simply cut a hole and hung horizontally. They are convenient to plant flowers or seedlings.

For the manufacture of street floor vases need to exert a little more effort. Five-liter bottle of the whole detachable bottom, about 5 cm, set it on the ground. The remainder of the structure are turning upside down and fasten the lid to the closed base or plate. At the bottom you need to make several small holes to prevent water stagnation in the soil. Decorate budget vase can be any color.

We use bottles for games

From plastic empty bottles can not only create ornaments, crafts, floral arrangements, but functional equipment for sports games. Plastic containers easily and safely can be involved in moving and relaxing activities. Play with it can be in the following games:

• Bowling. For the game need a ball, ribbon for fencing and a few liter bottles. Skittles placed two meters away from the border and trying to bring down. Bottles can be left transparent or paint the inside of the acrylic paints;
• Catch the ball. Make a toy can be a cut-out of the bottle with a twisted neck. Foam rubber or cardboard making petals and glue them to a slice. Cover is clamped one end of the thread, and the other is attached to the light ball. The essence of the game - push the ball to throw and catch the plastic trap-flower;
• Throwing rings. An interesting game for a group of children. The main design element - a plastic bottle filled with water. They are spraying bars for rings.

Kids toys

Creation of animal figures from the bottles - an exciting experience for children and adults. Of the cylinder and cut off the end turn out charming penguins in caps. Details need to put and paint. From the bottom of the bottle can be a turtle. On the cardboard figure it is necessary to impose a plastic preform to bond a beautiful thread. The intersection of the laces on the shell, you can hide a flower or a butterfly.

Of the two plastic bottles, you can make the body of a crocodile, a hedgehog, a big bee, a cat or a swan. Given the characteristics of toys container cut into parts, put together with tape. For bee and the crocodile will need only part of the neck and the stopper for the legs. areola making of paper or plastic straightening irons. Foil suitable for needles hedgehog. diy frame can decorate papier-mâché or leave transparent.

Furniture for dollhouse

Update dollhouse is easy and absolutely free. For the manufacture of miniature dining take several 0.5 liter bottles, glasses, textiles and little bonding material. dolls chairs do bottoms of bottles, cut curved back. Capacity cotton stuffing, turn over and decorate with fabric cover. A table can be made from smoothed square piece of plastic. Fold the edge, fix the tape on the inside. The legs will match stuck into lumps of clay.

Shower toy dolls can be made from a plastic cylinder. Cut the bottle, visually divide into four parts, bends a fork and develop well. This will be the door to the little men. The stand can be made of cardboard or a piece of plastic rectified. The fastening parts glue gun.

Candlesticks for comfort

Decorative candle holders can be made from both glass containers, and plastic. The second option is equivalent to the functionality and safety. Create a beautiful decoration for comfort can be from the bottom or top of the bottle. We cut off part of the neck, to establish a stand decorate non-combustible materials. It can be natural stones, beads, wire. Such a product will suit the usual elongated candle.

From the bottom of the bottle can be manufactured candles stand in tablet form. Fall asleep capacity flour, colored sand or fill it with water, put in the center of the flame. To make the original decorative candle holder for straight candle, need to combine two plastic neck and secure. In sections cut petals and their circle outline with black marker.

Christmas tree ornaments

Simple ornaments of plastic you can decorate the Christmas tree at home entrance wall or use them as a street decoration. Plastic material is good contact with all kinds of colors, sharp objects, easy to cut with a knife and glued. By the New Year, be sure to try to make the following toys:

• Snowflake. You will need two identical bottoms of bottles. We connect them with tape and decorate various patterns by using paint or toothpaste. The seam can be hidden under the satin ribbon. You can hang on the Christmas tree or make a turntable;
• Cone. Will use a brown beer bottle. Cut flowers of different sizes and are strung on the line. If desired the edges can singe lighter;
• Icicle. Will work with a rectangular piece of the bottle. Tightly wrap the pencil, hold for a few minutes. Plastic spiral curls beautifully. For decoration you can use sequins, satin ribbon.

Lampshades for lamps and luminaires

There are many workshops for the manufacture of lampshades for lamps of varying complexity. Some of them imply the existence of skills in working with such material. Inexperienced masters best to start with simple crafts. The lampshade is made from the top of the five-liter bottles. Brightly painted group lampshades hanging at different levels, will make the interior of the fun and fabulous.

Diffuser of the bottle can not only be domed, but assembled of several parts, for example from cut or bottoms fall fringe. A true masterpiece - a huge chandelier-sun of the whole bottles, arranged like the rays.

Furniture

To manufacture functional furniture, it will take more than a dozen empty bottles. Before you get started, you need to think about design, prepare the frame and bonding material. Make your own hands can be a bed, chair, small cabinet. Since each piece of furniture has its own characteristics, it should be designed taking into account the frequency of use. Very easy to make an ottoman, the following actions are performed step by step:

1. Choosing a central bottle and make cuts in its widest part;
2. Put in another container neck opening;
3. We continue to design the collection, until we reach the optimum height;
4. Fix a blank tape;
5. Create several similar parts;
6. Putting tape circular structure;
7. Product wrap, foam and any fabric.

It is not necessary to sew the cloth tightly to the ottoman. Over time, it will wear out, and wash the entire structure is unlikely.

Pictures of the covers

Many talented artists create amazing products from scrap materials. Pictures of the covers can be seen not only in modern interiors, but also on the streets of major cities with a call to protect nature. To begin creating such beauty must be a matching base. Suitable plywood or thick cardboard. Now taking on a kind of canvas drawing. Prepare multi-colored cap and glue.

Stuffing picture can be different in size caps. Better move from the center of the main figures. In the last turn spread background, correct material spoon. If there are no caps desired color, suitable in size, you can simply paint.

Crafts for the garden

Plastic containers can serve not only as a decorative material for decorating of the interior garden, but also indispensable, affordable assistant in the garden and the garden. Of densely packed containers, you can make an original, and most importantly, functional greenhouse. In such a structure can easily be grown seedlings. To save space sprouts can be placed in a vertically suspended from the wall bottles. Planted in the soil the plants are constantly getting moisture when put next to a makeshift structure for drip irrigation from a practical plastic.

Creating vertical beds of bottles

Great idea for small gardens. You can grow plants in hanging plastic designs directly on the fence or hangers. Any two-liter containers suitable for the creation of flower beds. The easiest way - cut in half with a bottle swirling loose lid. In the upper part lays soil and the plant is placed, for example, special grade strawberries. Neck lay in the bottom member, which serves as a moisture storage. Assembled module primatyvaetsya wire to the frame.

To make a vertical bed of need on the one hand the bottle to cut a big hole on the other - to make the holes for drainage. Through the bottom and the neck rope threaded and covered ground. Structure is mounted to a vertical surface only in finished form. Improvised the beds can be equipped with all the walls in the greenhouse, observing zoning varieties.

The decor for the garden

Decorate a personal plot can be stylish and inexpensive crafts from plastic bottles. On the playground, near the border, you can place a giraffe made of several cylinders. All parts are tightly connected and fixed with adhesive. For the six-liter container trunk use several Liter leg. The bottles at the bottom of the legs fall asleep sand. The tail is made of wire and heated strips of plastic. By the same token collect the ostrich, donkey and other exotic animals. Complete the picture of a palm tree can be bottles, different wheels.

To decorate flowerbeds and terraces, you can make a few piglets pots. On the one hand, six-liter bottle cut out the large rectangle - this will be the torso pig. Ear use curved portion liter tanks. Paint pots in pink color, draw the snout and eyes. Put the soil before planting.

Feeders for birds

Benefit nature by making a bird feeder, in various ways, and the most amazing material. Usual plastic bottle with a slotted window - the easiest way to feed the birds. Of two adjacent small bottles can make crafts bunker. If you hang the container vertically, you can increase the area for grain and feed at the same time a few birds.

The most convenient and practical feeder can be made from a large plastic container. On all sides it is necessary to make windows, sections of tape to paste or singe lighter. Light weighted design can, by putting the bottom piece of plywood.

conclusion

Plastic bottles - one of the most accessible materials. Each house occasionally going to a lot of empty containers, which can be applied with advantage. Original colors and different sizes make it possible to produce bright crafts, jewelry, multi-functional items. Thanks to the strength and durability of plastic, all products keep their attractive appearance.