How to decorate the heating pipe in the battery room 45 photos

To create a holistic interior owners need to take care of all the details of registration of various premises housing. Particular attention should be given to them to close unattractive communications. We have considered the most convenient and practical options that will tell you how to decorate a tube or hood. The paper can be used available materials or special building panels, sheets. Depending on the communication junctions location can be used by different types of decor. It is also important to remember, and the requirements of public services, which may limit the number and type of solutions for different nodes. Having carefully considered all kinds of decoration, the owners will be able to choose a valid way to decorate a communication without prejudice to the generality of style registration of residential and non-residential premises in the house.

Getting Started

Before working on the creation of falshsten, boxes should take care of communications themselves. Damaged items or old should be replaced with new connecting nodes. So, will prevent problems with their condition in the future. Above the heating element necessarily need to install a small ventilation hatches. This eliminates the chance of moisture accumulation, poor-quality space heating. Around or under water pipelines should provide moisture barrier. For this purpose, thin web materials or thicker, cut-to-size tiled boxes analogs may be used. Their application will eliminate the accumulation of moisture and destruction finishing mold. As for the old metal communications of their pre worth sandpaper to smooth out and cover the new coat of paint (resistant to high temperatures, humidity).

Features decor

Before you beat the communication should take into account some of the features and requirements for them. For example, a gas pipe in the kitchen can not be completely closed. The best solution would be for her decoration or painting. In accommodation possible to mount falshsten and boxes. If necessary, they can be supplemented with a mesh or grid for ventilation. any material can be used for finishing and assembly: they will not be subject to special influences. But in the bathroom is necessary to use only those materials that endures high humidity. These include boards, moisture resistant plasterboard. To close the vertical communication can use different solutions: cladding and decoration will not lead to a reduction in space. But horizontal communication should be closed only after a thorough review of available solutions. After all, even a small casing can lead to restriction of space.

Painting

Catchy and unusual issue of communication in any room housing will help them stylization using paint. Solutions in this direction can be divided into the following types:

• the creation of an accent. Great for heating in the bedrooms and halls. For example, on a background of blue, turquoise, purple walls will look flashy yellow and orange battery wiring.

• neutral design. For this method the paint should be selected to match the finish used. The optimal solution for communications, located in front of self-colored wallpaper, paint, tiles.

• stylized interior. To toilet wiring or wiring in the bedroom with colorful tiles, wallpaper minimum stand out, it is recommended to complement monochromatic painting themed designs, patterns or designs.

Using a paint can in the hallway or the children's room, living room styled vertical wiring under a tree. To do this, on the wall depicted crown and the tube itself act as a trunk.

Decoupage

A simple way to decorate the communication in the living room or in the dining room is a holding decoupage. For him, you can use decorative paper, paper napkins, and even with a few pictures. The work with their hands quite easily and quickly. For its correct execution can be used the following scheme:

1. To clean the surface of fine sandpaper communications. Remove dust with a stiff brush.
2. Communication cover construction adhesive, stable to temperature, moisture. To do the work in stages is recommended: conditionally divided into several parts of communication.
3. Above the glue to attach in advance the cut diameter Communications newspaper sheets, napkins.
4. Thoroughly attached handle material via the scrubbing plate, removing air bubbles and leveling the surface of the drawing.
5. After complete drying of the adhesive coating to implement paper material with acrylic lacquer with an increased degree of stability.

we use bamboo

Unconventionally decorate communication kitchenette, sanitary facilities and the living room will help the use of bamboo. Hollow trunks with different diameters are sold in the building and garden stores. Select their recommended pre-measuring the diameter are made out communications. In this case the selected bamboo inner diameter of the cavity should be at least 0.5 cm longer. Otherwise there can be problems with their installation. Close communication such columns rather easily. It is necessary to make 1-2 vertical cut on the bamboo. And then just put it on top of the pipe communication. If necessary, one of the edge can be glue adhesive for secure fixation.

Choosing such interior element, such as bamboo, should take into account the possibility of its implementation to the overall look of the room. Such a decision would be appropriate to look at the background of a light brown linoleum or wood flooring, wooden walls. It fits well in the eastern, Japanese style.

drapery fabric

Pretty elegant considered harping on old metal and PVC vertical communication with a cloth. This cost-effective solution for premises or rooms where cooking. Usually used to close the communications translucent tulle. The same cloth should be used for closing windows. You can completely copy the curtains and draperies used for distributing both light and dense fabric. To the chosen route of distinct looked indoors, should extend to the corner of the ledge, where the vertical communication and to mount them next to (on an adjacent wall). Thus, the web will close the floor is not 1 and the wall 2 directly. The dense fabric can be hung on one side of the window opening and near communications. And you can use them outside of the pipe and on both sides of the window. The remaining space is closed translucent canvases.

cordage

The original decor of vertical and horizontal communications can be carried out with ropes. To work it is not recommended to use the cheapest jute ropes (with an uneven surface), as they are quickly covered with dust and it is difficult to remove. But neat smooth analogues of jute (conventional or painted) are suitable for use in living rooms, toilet. Vertical wiring with such a material can be styled under a tree, a palm tree. For similar decoration on top of the braid the communications it is recommended to fix the artificial foliage, branches and plastic lemons or oranges.

In the little Khrushchev using thin ropes, you can create original sea decoration. To work suitable white cotton ropes. In this case, the horizontal cabling is possible not only to braid, but also decorate flowing ropes. In addition to the braid can attach small shells.

Stained-glass windows, furniture cornices

The use of non-standard solutions to style apartment and hide Communications gas, water, heating makes it easy to transform living spaces and kitchens. it is recommended to use stained glass to vertical wirings. They can decorate a living room, adult and children's bedrooms. Stained glass is not only close the communication, but also become a stylish decoration. If for colored glass, framed wood or a similar body, position the backlight, the object will be ready to support the lamp. In the case where the communication are at the top (ceiling occupancy), cost-effective solution would be to close them in upholstery cornices. They are mounted on a side cabinets, sets the top and are fixed to the ceiling. In this case, access to communications is simple, and the space around them - free.

Curly eaves suited to classic headsets, but it is unlikely complement model with bright facades and chrome roof rails.

The box is made of plasterboard

Close exhaust ventilation duct, wiring plumbing quite easily using drywall. From it you can assemble any shape and size design that allows to change the layout of the room. In this case, all communication will be closed from prying eyes. This approach is applicable to hide chimneys. Work assembly design is conducted as follows:

1. construction Marking the parties regarding the closable communication. It requires taking into account the thickness of drywall sheets used for the job.
2. Screwing guide and support rails.
3. Screwing to profile frame plasterboards (pre-clipped). To work in the sanitary premises are advised to bring water-resistant sheets for premises - ordinary.
4. Grout and protection of joints, installation of additional elements (corners, sanitary manholes)
5. Finishing construction tiles, painting, pasting wallpaper.

The box of a laminate, MDF

The assembly of structures made of wood-based panels and similar materials suitable for communication, above the baseboards, going to the cellar. Their basis should be collected from reek. The use of timber, boards will quickly produce a solid frame, complemented lifted a door made of MDF or fixed top. With the help of rails can be assembled completely detachable structure. From above it can be closed by a laminate. Dimensions and materials of different types of boxes are defined individually. The use of rails and the laminate will result in significant costs. Wood-based panels, plywood less expensive, but also their appearance to be more simple. Therefore, this type of boxes is recommended to make the premises, which do not need strict stylization. The use of expensive laminate mainly for building a dedicated stylistic direction (e.g., modern, Provence, Scandinavian).

Falshstena

In a situation where pipework has large dimensions and creating a small box will not solve the problem, you can make a full falshstenu. It is assembled from profiles and plasterboard sheets. Created protrusion recommended supplemented sanitary hatch. This will allow owners to easily gain access to the communications and carry out their repair or replacement. The sanitary rooms falshstena may be precarious. To do this, the left and right going to the box on top of them hung sanitary shutters. This solution will instantly gain access to wiring, eliminate leaks, and without delay, to implement the complete replacement of communications. Falshstenu itself can paste over wallpaper or paint, tile oblitsevat. As a base to be used gypsum boards moisture resistant.

conclusion

Using advice on decoration and closing communication, the owners will not be difficult to select the optimal way to style housing. The simplest solution would be to staining and painting isolation. But also communication under the sink, next to the sink can be easily sewn. Correctly selected building materials help no problem to make a small ledge or full falshstenu a projection for storing cosmetics, towels. The same method is optimal for living quarters, but they can use other types of materials: more unusual form and with less regard to the operating conditions. For example, it may be raw wood or polymeric panels. By selecting the materials used for application possibilities, usability, shade and relief can be correctly and at the same time an original complement any stylistic direction.