Bag with your own hands: instructions on how to create a photo 75

Bag - a small square, rectangular, oval, round, or any other form of a box in which to store money, jewelry, all kinds of small items. The product performed wood, cardboard, plastic, decorated by laminating a cloth, paper, pieces of broken glass, stones. Bag with your own hands - an original idea for a gift for any holiday.

Materials, workshops for the manufacture of boxes

Decorative box-chest for jewelry, small stationery items for crafts, is a small box or chest with several compartments. manufacturing materials such items are very diverse, it can be:

• natural wood;
• plywood, MDF;
• slices of baguette-frame;
• shoe boxes, large packs of juice, milk;
• Corrugated cardboard reel of adhesive tape;
• bamboo napkins;
• sticks of ice cream;
• wooden bracelets;
• colored polymer clay, salty dough;
• newspaper tube, rod;
• pieces of the conduit;
• wooden pegs;
• postcards;
• thread, laces, cords.

When there is an opportunity to spend on their hobby heavily, for the manufacture, decoration boxes purchased precious, semi-precious stones, wooden box from under the cigars.

baguette

Frames - preferably wood profile for manufacture picture frames. Its gain in baguette parlors, and in the presence of appropriate equipment produced independently.

To make a chest size of 18 by 18 cm, will need:

• baguette cut length 2.8-3 m, a width of 4.5-5 cm;
• three pieces of hardboard for the cover and the bottom;
• two loops with fasteners in the form of screws;
• lock with attachments;
• dense fabric with embroidery;
• PVA glue "Moment";
• acrylic paint.
• miter box with fine teeth hacksaw;
• jigsaw;
• pliers;
• screwdriver, hammer;
• knife or microdrill;
• line.

Working process:

• It is cut at an angle of four pieces of baguette for the cover, to glue together "Torque";
• glue on top of the cover, decorating its fabric with embroidery;
• saw off four more pieces of baguette, to get the wall boxes, glue;
• attached to the bottom of a baguette with screws - the latter should not be too long;
• cover with the base box is connected loops;
• product surface is painted with acrylic, varnished.

To simplify the manufacturing process may be asked to cut the material at an angle of 45 degrees in a baguette workshop.

From reels of adhesive tape

Older empty bobbin from the adhesive tape is also used to carry small casket. To work need a tight but flexible cardboard, colored paper for decoration, two spools of tape - wide and narrow. During creation, to each of the reels is glued cardboard circle inside the broad pasted cardboard cylinder, to 0.5-1.2 cm protruding over the edge of the reel - he needed to box closes. The finished product paste over with colored paper, decorate with bows, ribbons, tissue slices.

From bamboo napkin

Bamboo towels are produced self-colored, decorated with beautiful intricate patterns. For the manufacture of napkin boxes of bamboo glued or sewn on tight textiles to its edges are frayed, twisted, fastened to the structure of the two rounded sides, well decorated cloth. Tightly only three sides need to connect - the fourth issued a miniature padlock fastened on a button, a button with a loop.

Of the boxes for shoes

Cardboard shoebox simply, quickly converted into the original box, paste over it any tissue paper. Chest smaller performed using boxes of tea, juice, milk. In the latter case, you need to put the box on its side, making the top of the C-shaped cut, bend a piece of cardboard - will cover here. The design of glued cloth and secure the top and bottom by two satin ribbons, laces.

of cardboard

Cardboard box in the shape of a heart - a great homemade gift option. To do it, you must:

• three colored cardboard sheet;
• tape measure;
• line;
• PVA glue;
• paper flowers, beads for jewelry.

Cardboard draw two hearts that size, what should be the future of the box, but the heart-cap is done by one millimeter more. Further centimeter tape measure the perimeter of the heart, two stripes are cut appropriate length (for narrow covers a broad - for the bottom), the teeth on one edge, by which bonding is performed to the grounds. Finished jewelry box decorated with beads, ribbons and the inscription «LOVE» and others.

Of the sticks from ice cream

Boxes can do, using wooden sticks from ice cream - they need at least 29 pieces. More needed "hot glue" a little cardboard, acrylic paint two callers, satin ribbon, ruler, sharp scissors, a pencil. Colorize: 14 sticks one color, the other 15. Cut two rectangular parts, measuring 5.5 by 7 cm, two semicircles 7 cm length of corrugated cardboard, a height of 3 cm. The cardboard parts are also needed to paint.

Bedplate is made up of seven sticks, alternating in color, these vertically glued cardboard sidewall. More two sides are made of sticks six each - are attached to the sides. Two semicircles joined by ten chopsticks - it will cover. The ends of the satin tape are pasted on the two ribbons attached lid.

Wooden bracelets polymer clay

To make such a casket, you will need:

• wide wooden bracelet or a suitable billet;
• hot melt adhesive in the gun;
• colored polymer clay, tools to work with it;
• paint brushes;
• round shaped biscuit - a little more and a little less than a bracelet;
• white marker.

Polymer clay need to roll it out in a thin layer, bracelet squeeze circle bake it. Bracelet dye ink (e.g., yellow), apply pattern - rhombs with dots. Round bottom of a baked sticks Melt. Cookie cutters squeezed out two circles of different sizes of green polymer clay, they are baked, glued together. Wooden scalpel cut leaves like the tail of a pineapple - they also need to bake, glued to the cover box.

plywood

Simple plywood casket is made of several parts:

• four sidewalls 10 by 8 cm;
• cover and bottom - 10 to 10 cm.

Sides are glued with white glue at an angle of 45 degrees - for this they are cut accordingly. Further glued bottom to fasten the cover, a loop on one of the sides and lid itself chamfered. The hinges are screwed with screws, the outer part of the article decorated in any manner.

wood

Carved chests-boxes are made of natural wood - basswood, aspen, ash, oak, alder, birch, spruce, and others. This will require the board thickness of 1-1.5 cm, which is being cut to size products. Pre desirable to make a sketch and finished dosochki mark, handle cutter, to give a beautiful shape. Garnish may also manually raschertiv preform, using a ruler, compass, sewing patterns - thread (typically geometric, Kudrino) is performed according to a strict pattern. If desired, a casket made drawer with a handle and a multi-compartment, so that the product was neat appearance, it is treated with sandpaper, stain tinting, coated with two layers of lacquer tree.

Before you start decorating the chest need to be polished with sandpaper - first large, then small.

of cards

For the manufacture of such boxes need 4-6 cards, "floss" thread, needles, ruler, pencil.

Details of foundation:

• 14.5 by 8.5 cm - two pieces;
• 14.5 to 10.5 cm - two pieces;
• 10.5 by 8.5 cm - two pieces;
• four rhombus of side inserts 9 cm length, width - 6 cm.

Cap:

• one item 10.5 to 8.5 cm;
• two semicircles of 8.5 to 2.5 cm.

All parts are sewn a loop seam, going to each other by stitching - box and the lid are carried out separately, connecting on only one side. Front attach any small clasp, a button with a loop.

of thread

For the manufacture of such boxes need toothpicks, cardboard, yarn of any color, awl, Melt, pencil, scissors. Initially drawn on cardboard template - heart. Around its perimeter, departing one cm. from the edge of the hole made in centimeter from each other, there are inserted toothpick tips are smeared with glue. Next is weaving as linen - thread goes in waves. When the desired height is typed, the thread is fixed, cut. To make a bottom, it simply wrapped lubricated with glue thread. Top design is made with lace, ribbons, beads.

Wooden pegs

Bag-keg is obtained from a round box of chips, such as "Pringles" dismantled wooden pegs - they only need 12. Clothespins halves are glued with glue "moment" on the bank of the chips are tied in two places linen twine. Cap and glued linen rope, decorated with paper or textile color, or a glass of souvenir ball from polymer clay.

From newspaper tubes

Tubes twist of newspaper, cut into strips the width of about five cm., Pages of old books, magazines - each sheet rolled diagonally by winding a thin needle, the tip of the sheet is fixed PVA glue. To work would take at least 18-22 tubules.

Tubes were stained with paint to create boxes of cardboard attached to the bottoms of round or square shape, after which entwine one long tubule. When the desired height is reached, the tubes are bent, cut off. After the cover can be woven caskets, adorned her textile bow flower.

Of salty dough

Salt dough comprises flour, water and salt in the ratio of 1.2 to 2 to 1. The dough is thoroughly kneaded, and stuck to any suitable container - a jar of cream, cotton swabs, and others. To decorate the product is made of fruits, leaves of dough, are attached to the bottom "legs". Drying is done in a microwave oven - usually enough for five to seven minutes. Finished design paint by hand, coated with a transparent lacquer or dark, dried in air.

From the sewer pipe, MDF

Jewel box can easily produce even a piece of sewer pipe. You will need:

• plastic sewer pipe;
• rubber cement;
• a small piece of MDF or plywood;
• primer;
• Food foil;
• latex (e.g., purple);
• glezal white, bronze;
• gold paint;
• steel pin-base;
• ball and O-wood sticks;
• jigsaws;
• drill with drill bits;
• compass.

To begin, the pipe is cut four identical fragment width five to nine cm. Their edges are sanded sandpaper, to avoid burrs. On a sheet of MDF imps five circles with a double loop width centimeter cut on the outer contour. In round four parts is a recess that allows the pieces to put on top of the pipe.

Further, plastic rings are put on the flat cap made of MDF, glued to him. Each circle pre-drilled hole for the central pin, and a recess in which It will later be inserted into a small stick, which prevents turning of "links" on its products axis.

After the construction adhesive is covered by a priming mixture, when the layer is dry - violet colored latex paint. Then the details are decorated glezalyu, color pearl and bronze. To create an original invoice "marble", a crumpled piece of cellophane (food foil) blotted the last not yet dried layer glezali. The steel pin is inserted so that it passes through all the details, and a metallic tip protruding from the top, worn wooden ball. The finished product is decorated with gold paint on the lid is glued butterfly or bow.

Instead of gold ink is sometimes used potal gold, in which case the optional Mordan adhesive.

decor Methods

The finished casket made of any material, without fail decorated, to impart a beautiful, "holiday" appearance. That is used as a decoration:

• technique "kanzashi";
• pasting textile, leather, colored paper, paper;
• decoupage;
• finish ribbons, bows, lace knitting;
• painting, coloring by hand;
• decoration pieces of eggshell;
• a mosaic of different materials;
• design of "natural gifts";
• decor curly pasta, different kinds of cereals;
• burning, wood carving.

Different product design to decorate the hall in the retro style or romantic baby, marine interior or Provence-room, hallway, or the loft Boudoir Baroque.

car wrapping cloth

Textiles paste box can be both inside and outside. For pasting the interior space is cut crosswise pattern of the paper, which, after being translated into fabric. It is best to take the velvet. It is important to be sure to make allowances - up to one cm. from each side. Next, the paper carefully smear glue, glued to the fabric by folding the last so that with the outer edges of the paper to be seen. The product was dried under the pressure of the books, and then put into the molding boxes, pressed, dried.

The easiest way to paste over textiles round box - it measured its height, the fabric is wrapped around, trimmed box smeared PVA glue, the fabric is pressed against it, the product is dried. The same is done with the lid. Wood, plywood box can obtyanut and knitwear - it is placed on the surface of beautiful folds, sticking only to the bottom, fix a stapler.

Looks interesting article pasted fur, with a scattering of beads on it, fastens with buttons, buttons.

The decor in the technique of "kanzashi"

Appliances decorating "kanzashi" - the art of making flowers, leaves, birds, butterflies and strips of cloth. To place a product in such a way will need the following materials and tools:

• cardboard cylinder with a diameter of 9-12 cm;
• Felt fabric;
• cardboard;
• satin ribbons;
• organza;
• glue gun;
• sharp scissors.

Working process:

• encircled cylinder on a piece of felt and cardboard such workpieces is six, four size of the external contour of the pipe, two - Inland;
• Details are connected in pairs - we have two large circles, one smaller;
• glued to the box bottom cover is tried;
• of tissue are cut parts cover and the bottom, they are incised, are coated with glue;
• the fabric is glued to the bottom and the sides bent inwards;
• cap fitted by the same, but it is glued inside of textile loop and wide short ribbon;
• smaller circle is greased with glue, glued to the inside of the lid;
• glued inside box with felt;
• for decorating the exterior of the cap taken pieces of tape, measuring six by six see that fold into the form of petals, glued on a circle along the edge.;
• five sections of tape to continue to come from five cm of them performed the inner circle of petals.;
• in the middle of a large bead is pasted, button, pebble suitable color;
• sides also decorated with two or three rows of petals;
• the bottom is decorated with a wide ribbon.

Wrapping paper or wallpaper

Appearance drawer, pasted over with paper, depends on the thickness and texture of the latter. When using silver vinyl wallpaper, easy to create the effect, if the product is covered by metal. To work need PVA glue, paper towels, clear lacquer, colored acrylic paint, wallpaper themselves, the other paper.

Of wallpaper are cut parts, taking into account the shape, the size of the future product plus small allowances for tucking. Glue is applied to the back surface of the wallpaper, the paper is left for a few minutes to soak, tightly pressed to the casket, smoothed. It is important to carefully monitor so that when adhered air bubbles do not form.

Next, on the surface of a black acrylic is applied, then, applied to red, dried using a paper towel. The next layer of silver, after him - bronze, again black and red, green and gold. The product should be thoroughly dried, cover one or two layers of varnish.

Decoupage

For decoupage cardboard, plywood, wooden boxes, you need:

• the box itself-base;
• napkins patterned magazine clippings;
• pieces of cloth, lace, ribbons;
• PVA glue;
• lacquer;
• acrylic paints;
• brushes;
• scissors;
• sandpaper.

If the product is wooden, its carefully zashlifovyvayut of pieces of napkins, magazine pictures, patches, made up a picture or pattern is tried with the product. Next, glue is applied to the surface, all parts are glued neatly, smoothed, the excess adhesive is removed with a sponge. Ready box dried, varnished. Similarly, you can paste over the box inside.

Coloring, painting

Personally paint the chest can be acrylic, oil paints, gouache. When the article is pre-papered fabric, its paint technique "batik" using special dyes contours.

To paint simple wooden boxes need primer colored acrylic paints, brushes, Stencils (easy to make their own out of cardboard or buy in the store), sandpaper, paint Scotch. Initially, the design is well sanded, lacquered. Further, even layer of primer is applied, dried, oshkurivaetsya again. After the box is covered with paint, varnish layer is fixed.

With the help of masking tape closed part of the product, which is made out pattern will not. On-site free of adhesive tape secured stencils, their inner part is colored thick paint. If at first the tone went bright enough, is applied on top of another one. When the painting is completed, the casket varnished completely.

Decor eggshell

You can decorate the casket pieces of eggshell - used chicken, goose, quail, any other eggs. Also for decorating the trunk need different paint, PVA glue, wooden manicure stick, brush, wipe with a pattern, a box of suitable size, which is carefully sanded sandpaper "Nulevku".

Process D:

• the future of the boxes, the size of a few centimeters. square, smeared with glue;
• taken piece egg shells, is applied to the coated surface of the adhesive is pressed manicure wand;
• under sticks shell cracks, breaks into several parts;
• the distance between the pieces is regulated by the same shells wand and may be any;
• then gradually pasted over the entire surface of the product - only the top or all the parties fully;
• layer is applied over the trunk of PVA glue, dried;
• white acrylic paint is applied in two layers is dried;
• is now taken two or three-layer napkin, it is separated from the upper layer with a pattern cut liked fragments;
• a piece of cloth is applied to the box, quickly and carefully covered with white glue.

If you want to issue the product "antique", it is covered with black or brown paint, using a semi-dry sponge.

mosaic decor

In the role of mosaics here are the sunflower seeds and lupine, sea and river shells, wood saw cut and pieces of bark, broken colored glass and beads, coffee beans and watermelon seeds. Chest, after sticking decoration, typically varnish from a container, partially or totally dyed.

Also popular is voluminous decor Cured polymer clay. More work is needed to:

• round box;
• the liquid plastic, Fimo gel;
• acute stationery knife;
• working surface of glass or ceramics;
• line;
• brush;
• satin ribbons;
• dies for the polymeric clay, textured sheets;
• baby powder or talc;
• rolling pin for plastics;
• lacquer.

How to make:

• plastic is rolled out thinly, cut a rectangle out of it, a little more than an internal height of the box;
• lubricated inner walls fimo-gel is applied to the plastic surface is firmly pressed;
• upper edge is cut with a sharp knife in order to get a smooth "bumpers";
• Additional description of plastics is cut circle that after lubrication gel also be embedded in the box;
• space docking floor and walls are made of thick thread, lace;
• after the same manner issued lid;
• Both parts should be baked;
• using textured sheets made several prints of different colors - that they are not clogged with mud, sprinkled with talcum powder form;
• layers with patterns cut into small squares with a side of 10-20 mm;
• the outer part of the trunk is glued parts which alternate in color;
• before the last fragment of paste, is inserted under his piece of satin tape for connection with a lid;
• cover sidewall decorate squares, upper - triangular fragments, it is important not to forget to glue the ribbon and to this part;
• front boxes to attach a loop of satin ribbon - it was convenient to bake;
• after baking box is painted, but before it is completely dry, with convex parts carefully paint erased.

conclusion

Production of original shkatulochek own hands at home can become a favorite hobby can begin to earn not bad. A detailed master classes easy to find in popular magazines on the subject of "hand-made", as well as on the websites pages. Crafts made out the simplest materials at hand, because the financial cost to them minimal.