Decorative brick wall 75 photo examples in the interior

Many people remember the Soviet paper washable wallpaper for the hallway with a print of a brick wall and green rostochku. Since then, it took many decades, but the decorative brick on the wall not only has not lost its relevance, but gradually moved into the interiors of living rooms and kitchens, becoming a style-forming element of many modern styles.

Types and characteristics of the tiles

Of course, this brick found in the interior can be rare. Afford such a luxury only available to users of urban brick buildings, in agreement with the developer refused by plastering, and the owners of private houses of brick. In all other cases, to implement this bold ideas require imitation decorative finishing material.

flexible

Flexible tiles under brick used for interior decoration often enough. The reason for this are its good decorative quality and ease of installation. This material is made of modern cement, sand, acrylic resin and colored pigments. On sale you can find a huge variety of colors tiles under brick: all shades of brick, white, sand, gray and even black.

This material was gently bends at any angle, can be decorated with the help of internal and external corners, door and window openings, columns and other curved surfaces. For this finishing element is heated just before the dryer construction 50 degrees and is glued to the curved surface under pressure. Slightly warmed tile hide any irregularities in the substrate. Cut it can be a simple knife.

Through a combination of different colors of tiles from one collection, you can make a unique wall design. Deviations in shades further emphasize the natural brickwork. Due to the good performance characteristics (cold resistance, resistance to environmental factors) tile can also be used in outer finish - e.g., oblitsevat loggia.

It has the following advantages of the flexible modern material:

• It provides additional heat and sound insulation;
• thanks to its light weight, it is easy to operate;
• practically wasteless material;
• warm to the touch;
• It has a certain resistance to mechanical impact;
• can be put on cheap cement mix or cement glue.

gypsum

Gypsum tile under a brick is absolutely harmless and allows the surface to breathe, so it is popular in the decoration of not less flexible. In appearance and manufacture it differs little from cement technology. Lining material is made of gypsum with added plasticisers. It is light in weight, that determines the ease of working with it, and a certain breadth of application: for example, it can be mounted on drywall. Gypsum tiles dyed loses color upon prolonged use, has sound insulating properties, high decorativeness and inexpensive price.

However, some specifications it significantly reduces the spectrum of its application:

1. Gypsum tiles absorb moisture from the environment, swells and as a result is colored. Therefore, it is inappropriate to use in rooms with high humidity: bathrooms and the kitchen. Or on the tiles will have to apply a special varnish that will significantly increase the amount of investment in repairs.
2. This is a brittle material which can easily crack by mechanical action. Fragility also complicates the installation process.
3. Gypsum tile is an excellent dust collector. Raised surface accumulates dust easily.

Unfortunately, low thermal resistance and the fragility of the tiles makes it impossible to use in the kitchen near the stove, for decorating fireplaces, as well as for finishing places close to heating elements.

cement

Concrete tile has excellent performance and can be used for decorative cladding smokers, operated at any temperature. For example, for the walls in the homes of the seasonal use. The great advantage of the cement tile is its inexpensive price and the variety of colors and textures.

The basis of cement tiles constitute the mineral crumbs best brands Portland cement containing cementing silicates, sand and water. Casting or molding manufacturing techniques allow to simulate the surface with any accuracy. Several yielding clinker in mechanical strength, polymer tile has less weight, chemical resistance, high variety of color and texture performances. The coloring pigment added to the solution immediately Mixing, which provides color fastness and resistance to fading.

Paving

Paving tile is made of the same shale as a traditional brick - the differences are in the technology. For the manufacture of clinker clay used high temperature firing to full sintering a mixture of components. The resulting clinker tiles has a minimum porosity, excellent strength, excellent thermal insulation, cold resistance, water-resistant and decorative characteristics. Therefore, the clinker is most often used for facade.

The apartment clinker tiles - a perfect solution not only for the rooms, but also for the decoration of the kitchen and bathroom, as its moisture resistance and resistance to temperature extremes define its durability when used in complex conditions.

Panels under the brickwork

Widely used for interior decoration and wall panels under a brick made of PVC, MDF, glass-fiber. This material is easy to operate, and its protective coating withstands moderate impacts and friction. Widely resorted to it bars and restaurants to create authentic interiors. It is convenient for home use. The advantages of the panels are:

1. Duration of operation - up to 15 years without loss of performance.
2. Ability with minimal investment of time or hide unevenness communication system.
3. Light weight and a small thickness of the material allow its use even for finishing drywall partitions.
4. The ease of processing the material (cut conventional knife) and ease of installation.
5. Resistance to a high level of humidity, fungus, mildew.
6. Diverse design, a large number of colors, a variety of textures, there is no need finishing staining.

Have wall panels and a small disadvantage - when substantial mechanical stress, they can crack.

According to the base material panels are distinguished into:

1. Panels made of PVC - safe light decorative panels, which are glued to the surface.
2. MDF panels are manufactured from wood chips. Such panels have the high performance parameters: wear resistance, heat insulating properties and durability.
3. GRC panels - modern material comprising a mixture of quartz sand, white cement and the reinforcing fiber. It is a modern and flexible, lightweight, eco-friendly, vysokomorozoustoychivy, flame-retardant, moisture-proof, sound-insulating material, is not amenable to corrosion and chemical attack. Glassfiber vysokoprochen by shock, bending, tension and compression.

Advantages and disadvantages

When choosing tiles to create decorative interior masonry is necessary to carefully read the technical characteristics of the fabric. For example, for kitchen apron device should be chosen moisture resistant material to the surface for easy withdrawal. The use of gypsum tiles for these purposes will create some difficulties. The same applies to the use of tiles in the bathroom.

Installation time factor when selecting the material also plays a big role. Easier and faster to make brick decor of soft tile or using wall panels. Much longer it will take to work with hard tiles. Due to some difficulties in mounting some cases it is better to invite a professional.

The important role played by the price factor - a budget solution to the issue will be plaster or concrete tile, but clinker - fairly expensive material.

In general, the decorative tiles under brick to create a long-lasting beautiful interior in modern and classic styles, it will look original and noble and will last as long as possible.

Tiles with their hands

Some craftsmen prefer to make tiles for decoration with their own hands, creating their own unique texture. This process is not very complex and does not require the use of high-tech equipment.

polystyrene foam

Styrofoam bricks - easy option to transform the interior of your home. For the manufacture of bricks is taken fine foam, which is cut-to-size traditional brick - 25 to 12 cm. If the walls are aligned perfectly, you can stick the bricks directly on them. If there is no desire to engage in the alignment of the walls can make a board substrate of GCR or plywood.

Bricks are bonded to PVA on a wall or the substrate primed with a gap, mimicking natural clutch 10-15 mm. Cracks and potholes are applied to simulate the naturalness of the conventional soldering iron or a knife (spatula, any sharp object). Basis is glued to the wall. You can then proceed to the coloring bricks with acrylic paints. You need to paint in several layers starting with darker shades to more light. Painting is better to carry out from the cans.

Tiles with the stencil

Imitation of a brick can be made using a stencil made of plastic or rubber. For ease of use, you can buy a ready stencil from a reputable manufacturer of dry plaster mixtures and adhesives Ceresit. The manufacturer offers a whole line of stencils mimic brickwork London, Boston brickwork and so on. The surface of the repeated stencil texture of a brick wall.

Work should be done on freshly laid, still not grasping the plaster. Stencil lightly moistened with water, and with the pressure applied to the wall. After you remove the stencil will be immediately visible imprint of a brick wall. Stencil of a flat line is moved along the wall. Align and correct imitation masonry is necessary hands, not a tool. This creates a simulated natural texture.

After the solution has dried using a scraper bit clearer make bricks border. Then brush brush away debris from the clutch and start coloring.

Plaster and silicone molds

For the manufacture of tiles under brick plaster can of course use commercially available silicone or polyurethane molds, but prices could leave anyone confused. However, if the question is about the design of brick inserts a small area, you can buy one form, usually at 8 bricks and consistently produce the required amount of bricks.
If you plan to design the whole apartment in the loft-style, for example, or at least the formulation of a pair of walls in brick style, then it will be easier to cast multiple forms with their own hands and make their fast with the help of the right amount bricks.

For the manufacture of silicone molds require large shield of chipboard with boards aluminum brackets on the size of the future shape and decorative bricks. Bricks need to paste on a board with a slight shift or even, depending on what you want to get the clutch in the end, keeping the evenness mezhkladochnyh seams ranging in size from 3 mm to 5 mm. Bricks have to be glued tightly over the entire surface to a polyurethane which does not drip. Thereafter, the entire surface is processed by separating grease.

Polyurethane is mixed according to the manufacturer's instructions. Best of hardness polyurethane for these purposes - 40 Shore. The first polyurethane layer is smeared with a brush, and after a couple of minutes, the polyurethane can be poured onto the surface. Dry polyurethane is to day, and then you can get and put another 5 days, so he rested. Then you can start to work with him.

The simplest plaster mixture for the production of bricks:

• 6 parts of gypsum;
• 1 part of slaked lime;
• water at the rate of 1 to 0.7;
• color.

Ideally, to have a vibrating table. With it, the air bubbles are removed from the cast solution. If there is no vibration table, gypsum in each form you need to pierce any pin with the same objectives. After 20 minutes, the plaster is already grasped, and it is possible to gently pull out of the mold. Dry bricks have another day.

Relief masonry using plaster and masking tape

This is perhaps the easiest method for creating imitation masonry and does not require investment. For wall plastering can use the ready-made dry blends by mixing in the ratio of 1 to 1 and an adhesive plaster cement mixture. For more increase the plasticity of the solution it is necessary to add 5 kg 1 tablespoon detergent Fairy.

To construct masonry on the wall more suitable masking tape 14 mm wide. To simplify the work surface of the wall can be pre raschertit pencil. The distance between the lines is calculated on the size and dimensions of the bricks mezhkladochnyh seams. By smoothly incised lines glued tape so that the edges of the horizontal strips out outside the walls to be decorated, and the vertical strips are glued on top of the necessary horizontal. To the pencil marks were visible on the masonry tape is better to glue over the lines and slightly to the side. Scotch need to firmly smooth the wall and check that it is firmly glued together.

Now, on the top wall of the adhesive tape is applied with a spatula prepared solution layer 5-6 mm thick. If you apply a thick layer, then have to spend time on additional grouting. If the mixture is pre-otkolerovat not require staining. By applying the solution can go hand in wet rubber glove to create a textured surface.

After the solution was grasped, but not yet completely solidified, a grid can be removed from the tape. For tips tape, moving from top to bottom, it is removed together with the plaster applied on it. Once the plaster dries out a little more, you can trim the contours of bricks trowel. Small dents and scratches only add naturalness and natural brickwork.

If you plan to further staining the dried wall will need to be more primed. If the tiles are already colored in the mass, will be sufficient to cover its varnish for decorative coatings.
style solutions

Decorative brickwork imitating brick, not only creates a heavy load on the walls, but also allows you to design the interior, as in the classical (English style, retro), in the village (Country, Provence) and modern (Scandinavian, loft, industrial) styles. Let's look at some examples.

Loft

Brutal brick texture literally became the hallmark of the modern style Loft. In such an interior it will look to the place in any room - in the living room, the bedroom, the kitchen and hallway. As a rule, in the loft brickwork drawn one wall - accent. Color masonry can match the taste preferences of the owners - bright, white, light gray masonry will promote visual the expansion of space, whereas the saturated colors - brick red, brown and even black are valid only in the spacious apartments.

Loft is perfectly combined with modern furniture and bright colors. Its main companions - metal, wood and glass. 3 remaining walls can be painted white to create a stylish interior. As a representative of minimalist movement, loft not accept small clutter decor. The windows in this style can be no curtain, and on the first floor will look good blinds. Hardwood floors add comfort room.

The kitchen is a highlight in the loft will add a kitchen apron, made in the technique of masonry. However, you can also make a working brick wall up to the ceiling.

Country

The country-style brick wall as a background is a perfect look for the kitchen. Rooms often decorate brick inserts - along the arches, doorways. the main feature of country style - its lightness, ease and simplicity. It is very important not to disturb this harmony quite unwieldy brick.

However, if the room will be a place for the fireplace, the brick wall around it to add flavor to the interior. Small brick inserts will go perfectly with the unpretentious melkotsvetochnym print wallpaper and textiles. The main partner country style - tree. Wooden floors and furniture give this coarse rustic interior.

Gothic

Gothic - a rare, predominantly youth style, decorated in gloomy tones. Naturally, the brickwork of this style is black. Gothic style elegant, manages to combine romanticism with deliberate harshness. Therefore, side by side with rough masonry can and elegant chandelier in the living room, and a snow-white bed in the bedroom with four-poster bed. Textiles in the Gothic style should be heavy, the present painting and wooden furniture. Acceptable use design elements of forging.

Minimalism

Minimalism - one of the most trendy modern style. At least parts of decor - more moderation, rigor and conciseness. The main color of minimalism - the white, however, permitted color accents. However, the better it will fit into the style of a white brick wall. In a duet with her would look good wallpaper white with black print and unobtrusive wooden floor.
However, friends of minimalism and graphite gray, which also can be issued brickwork. Rough knitted carpet, laconic geometrically verified furniture, window blinds - usually this is enough. Operate on the principle of less is better.

types of masonry

Decorative brickwork achieved in various ways layouts and brick ligation, using bricks of different shapes and colors. The most simple and familiar way to create decorative wall - straight masonry: at the expense of the seam thickness and color, smooth, color, ofakturennoy surface. Through these elements, you can create a unique look. What are the best known types of masonry:

• Single-row;
• multi-row;
• a third-row;
• American hedge;
• English ligature;
• Old Russian masonry;
• Easy to sixth beside binder;
• Flemish and Flemish Phillips spiral, a diagonal;
• Christmas tree;
• network;
• diagonal-row ligation.

Bavarian masonry technique called when stacked bricks of different colors. Classic Bavarian masonry made of bricks 4 shades of one or differing textures.

conclusion

Masonry - is a fashionable trend in the interior, which is friendly with virtually all trendy areas. It looks good in the industrial and rustic, in shocking and modest Gothic minimalism in aristocratic classic and new-fangled faded Shabby-chic. Make home brickwork is simple and does not require large investments. But the effort will pay off handsomely and attention to your guests at home a snap.