Typical dimensions of showers: basic standards 50 photos

Someone washing takes about 10 minutes, while others spend in the bathroom for over an hour a day. The first case in conjunction with the limited vannogo premises - a good reason to use a shower rather than a bath. From large and comfortable plumbers rid rarely, but when original planning of the people are opting for a vertical cabin. Especially for the second category come up with a tropical shower and a ceiling. In the first embodiment, the water falls from the top, and the second - in the same way, but from the ceiling. The modern shower there are many technological components: lighting, speaker openings for hydromassage. Also offer models with seats. The bathrooms are buying showers, sizes and shapes which are "working" on ergonomics and space saving. On the market to choose from, and the price range at the same time very flexible.

Content

  • Advantages and disadvantages of showers
  • The main components of the shower
    • Pallet: shape, material and dimensions
    • wall
    • Doors: types of designs and sizes
  • Types, parameters and features showers
    • square cabin
    • rectangular cabin
    • Rounded corner cabin
    • custom sizes
    • Round shower cabins
    • Cab without rear wall
    • Dimensions showers with sauna
    • Shower with seat
    • Dimensions of the shower with a bathtub
  • How to choose a shower
  • The main stages of the manufacture of the shower with his own hands
    • With tray
    • without pallet
  • Design bathroom with shower
  • conclusion

Advantages and disadvantages of showers

All the advantages and disadvantages can be countered parameters baths. Shower cabin - it is primarily the "preservation" of square meters, splashproof and additional options for vertical washing. In addition, the consumer receives financial savings. Shower sometimes used in conjunction with a font. Add a shower will be much easier than finding a place in the bath in the bathroom, which has a shower. Gidroboksom equipped with advanced technological devices, and soul with a bowl - it's basically a full replacement of the bath.

Interior with shower

The disadvantages of the majority of booths emit the same. The first thing worth talking about distress and the inability to take a horizontal position. Large models with fine or deep grounds have other disadvantages. They do not save space and cost several times more expensive than the simple fonts. The state of the shower plumbing is deteriorating much faster than that of the bath.

Towel rails on the wall

Compact shower set with water reduces its consumption.

Indoor tree in the interiorLight green walls in the bathroomPanoramic windows in the interiorSink on the wallThe tree in the interior

The main components of the shower

In plumbing has internal filling and the main frame of the tray, walls and doors. Method compound affects the strength and tightness, and method for moving slats - for convenience and compactness. The contact between the doors provide rubber seals. Individual variations are collected without the rear wall. They cost less, but cause additional complications. Cabs are including complex curved shapes. These walls may have a suture connection and smoothly move in another direction. Only a limited number of cabins have a roof. Since it is definitely better, because so water does not get on the ceiling and walls. The spacious multi-functional models do often closed. Shower plumbing equipped with control panels, an upper water supply, means for water treatment, and sometimes small holes for ventilation and a fan.

Options showerSliding door to the interiorLamps in the nicheBedside table in the cornerTable by the wallFloor lamp in the interior

Pallet: shape, material and dimensions

Buyers see the market a wide variety of shapes: rectangular, square, oval, round, angular, semi-circular, multi-faceted. Make more original base like shells, snails and leaves. Sell ​​also shower with multi-level trays. Among other things, the base is divided into three categories - the height of the lower beads of 4.5 cm and a high index of up to 18 cm and more.

Parties pallets reach 130 cm in length, with a minimum of 70 cm. The most widely used model with parameters sides and a height of 1000 × 1000 × 140 mm, 900 × 900 × 70 and 900 × 900 × 50 mm.

As the base material used for metal, acrylic, and ceramics. Iron and steel products have not largely similar characteristics, and embodiments of acrylic something average protrude. Also produce ceramic articles of porcelain, earthenware and others. Original and presentable models made of stone. The best on the sum of qualities considered acrylic trays.

Pallet shower

wall

The side surfaces are symmetrical and asymmetrical, straight and curved. In simple wall structures is usually two or three, and these options are still the same side as the door / doors. Width conventional walls 70, 80, 90, 100 cm, and in large models - from 110 to 140-150, also with an interval of 10 cm. Nonstandard differ same difference, but have a width of 75, 85, 95 and so on. D. Among manufacturers prefer custom parameter resolution 85 cm. The width of the oblong walls corresponds to standard lengths baths: from 120 to 200 cm with a difference of 10 cm. The most demanded sizes - 120, 140, 160 and 170 cm. Width with unrounded values ​​such as 93 or 103 cm order, when it comes to planning a miniature portion of the room. The height of the same is from 190 to 230 cm at intervals of 5 cm. The optimum performance within the 210-225 cm, but higher model in practice better.

See also:Bathroom Design 9-10 square meters. m

The walls of the shower

Doors: types of designs and sizes

By design, they are sliding and swinging. Models of the first type is many times greater. Their sliding doors open through the roller mechanism. Space saving is obtained double. Among other advantages - convenience and tightness. The few models swing open in opposite directions, and none of the options has no advantage over the sliding doors. Increasing competition constitute the last pivot and swivel modification. An example of the first option - folding and "books" model. In turning the door opened and the shift to the side.

Sliding doors of cabins have from 40 to 140 cm in width. In leaflets square standard size options - 40, 45 and 50 cm. The curved blade makes with a width of 80-90 cm to 120-140. Dimensions typically swing doors 500, 600 and 700 mm, i.e. about "in the middle" between different recoiling.

Shower doors

Types, parameters and features showers

shower depends on the form:

  • functional load;
  • design features;
  • form pan.
Shower stall semicircular

According to these criteria, and distinguish them. Most of the market supply - is angular, square, rectangular and round shower. Corner semicircular become popular due to the maximum space saving. Rectangular design for large bathrooms and due to technical necessity. Shower boxes sometimes combined with fonts and saunas. Buyers receive a financial benefit and convenience of such options, "two in one". Soul-saunas are single- and twin. Models with a bath are either fully enclosed modules or boxes without a roof, and in some cases, the font is actually a continuation of the soul and open fully. The most necessary and basic comfort - this seat. In the relaxed position, people will be able to relax and continue to wash. Manufacturers each year come up with new designs. As an example, a compact model with a folding tray and collapsible plastic doors.

Drawers under the sinkArch in interiorThe radiator under the windowBricks on the wallBuilt-in lighting over the sink

square cabin

Advantages of varieties:

  • good compatibility with different interiors;
  • easy installation;
  • low cost.
Square shower

For manufacturers of square shape it is very simple. A small amount of material also contributes to the "restraint" of prices. Configuration with right angles leaves room for the installation of any type of glass. At the same time the entry of water into the compounds adversely affect the hygiene and appearance. Cabins with a square base pattern more successful are assembled with bath components. Their edges coincide with forms of home appliances and side shelves sides, tops. Cabins and combine with round fixtures. For competent planning a better option than a square, no. There will be no problems with the aesthetics. Square products are suitable for different and dissimilar ways of registration.

Among the running models is to provide a cabin with dimensions of 80 × 80 and 90 × 90 cm. In turn, the smallest model with high pallet will be a reasonable alternative to the bath in cramped bathrooms.

Shelves on the wall

rectangular cabin

Elongated shape becomes popular and indispensable in at least 3 cases. Rectangular cab mounted for 2 water supply points, embedded in the wall. In the extended cab a person can sit on the floor and stretch the legs - that is possible in terms of ease in her large. This - the second time. Manufacturers produce and options division of the camera that can be washed just two. Rectangular shape can hardly be called a classic. Soul with an elongated structure is not suitable for the replacement of the bath in a confined space. Although this alternative does not make sense, it is worth noting the possibility for technological solutions, design and functionality.

Rectangular shower

Popular models have dimensions of 70 × 90 and 80 × 100 cm, and also - 80 × 150 and 90 × 170 cm. The very large bathrooms buy large cockpit, because there is little look strange.

Rectangular model should be selected with extra facilities to use cost-occupied space.

Chair on the mat

Rounded corner cabin

Also known as "quarter-circle". Advantages of the angular models are expressed in presentable, foreign technology and maximum space savings. It should complement the rounded shower small bathrooms. So keep the usable area and get freedom of movement. The popularity of the model is expressed in the leading place in sales.

Rounded corner shower

The most compact versions do not have walls, so that they function switches on the bathroom wall. Finishing in this case does not interfere with process water-repellent composition. Parameters 80 × 80 and 90 × 90 cm - the most popular among buyers, and in this sense there is an analogy with the square showers. The difference in ergonomics - a very large and in favor of the angular models. Embodiments of the 80 × 80 cm belong to economy class, expensive souls are 90 cm or more. Pallets-angle models do basically the only low and medium.

Mat at the sink

custom sizes

In this sense it is worth noting the unusual configuration of the model and product manufacturers who are trying to stand out. If the standard small dimensions are 70 × 70 cm, big - start at 100 × 100 cm, and the largest up to 150 cm on each side, then on the specific case it is better to choose atypical. In order to make the cab up to centimeters, e.g., 97 × 97 cm, and m. P. Among rarely used "factory" size worth mentioning 85 × 110 85 × 150 85 × 170 and 110 × 170 cm. For installation in public places selected dimensions, which allows SNIP 2.09.04-87. On the size and shape of the display effect. Gidroboksom complex curved trapezoidal pattern is measured in the most remote locations in order to understand what is the place to choose. Multifaceted showers made for complex calculations and precise parameters indicate not always.

See also:Bathroom design in loft - interior photo

Custom shower

Round shower cabins

Their diameter is 900-1200 mm. For sanitary area 2.5-3 m² even design on the 900 mm would be unnecessary in terms of cost space: if you choose between rectangular and circular shower bath, then the first option will be more benefits. In an area of ​​4 m² balance "will move" in the direction of a round shower. Cylindrical cabin placed anywhere. The shape and size contributed to the fact that the layout of the premises does not necessarily fit into this plumbing. Avoid only unnecessary gaps between the wall and the cabin. The cylinder can not be put to the corner, but next to it will be a place for the safe margin over other types of plumbing. Round models more often equipped with a roof. It is used for everything, including overhead shower. Round cabin appreciated for attractive technological appearance.

Round shower

Cab without rear wall

Like the other embodiments, shower without the rear wall may be higher or lower than 200 cm. Low models more, and they are ideal for bathrooms with low ceilings. To draw water into the cab ladders can not be because of the potential harm to the walls. Nevertheless, the design wall mount are distinguished by reliability and durability. size range includes model 70 × 70, 80 × 80, 90 × 90 and 100 × 100 cm. The advantage of wall versions is that they save an additional amount of space but at the same time securing the principle causes limitations. Closed boxes put anywhere, even along parts of the wall, which protrude forward compared to other sites. But the cabin is set so as not to interfere with the relief without the rear wall. Shower with open side usually does not have a roof, and this affects the price. Material savings for manufacturers out almost double.

Shower cabin without rear wall

Dimensions showers with sauna

Boxes with sauna typically have a non-standard shape with bends. Manufacturers produce cabin with parameters 80 × 160 cm, 80 × 170 and 80 × 200 cm and wider for larger bathrooms. Design feature saunas models was the presence of steam, which heats the water to boiling temperature, and then cools the vapor to +50 ° C. Physical state gaseous substance is stored for some time in itself. In this case, the functional shower with a steam generator gives ordinary home sauna with the heating elements. In addition to a special shower, there is also a version with a partition, where the two cabins just abut each other. Size, they do not differ much from the single-chamber. Department with sauna is usually sheathe tree. Use different types of oak, conifers. Popular with infrared sauna cabin.

Shower with sauna

Benefits showers with sauna:

  1. Functionality.
  2. Benefit for health.
  3. Guarantee reliability and safety: they are sealed and electrical safety.
Beams on the ceiling

Shower with seat

Model invented for reasons of convenience and simple, so you can relax, as well as for people who during washing like to get distracted and think about something else. Fundamental difference in size compared to other types of showers there, but for versions with seat comfort point with a maximum space savings. It is about 80 × ratios 80, 90 × 90, 95 × 95, 100 × 100 cm. Any modification is larger: for 105 × 105, 120 × 120, 120 × 80 cm.

Shower with seat

The enlarged and extra large seat boxes - almost a mandatory element, especially if the product is "owned" by the expensive price segment. Feature form is high pallet with a smooth, slightly rounded figure - when viewed from above. Manufacturers offer atypical solutions like folding sidushek. Individual producers come creativity and let the soul with full built-in chairs, sometimes avant-garde form and for an appropriate price.

Rug steps

Dimensions of the shower with a bathtub

Versatile and convenient option that combines the approximate size of fonts, except height, and full functionality of the two types of plumbing. Prices of products starting from a minimum value of the two baths. Even the low cost options have several kinds of shower (in Vol. H. Hand and Upper), hydromassage, radio and accessories. More expensive equip fan, backlit remote control. A lot of money are the overall model with additional seats and decorative screens. In recent years, combined with a shower fonts do almost exclusively of acrylic. The material of the transparent part of the glass acts. Size units represented parameters 80 × 150 × 215 80 × 120 × 215 85 × 170 × 215 80 × 120 × 220 cm for the thumbnail and Medium models and 130 × 130 × 240, 135 × 135 × 220 cm - for large square products. Thus, there is a symmetrical and asymmetrical versions.

Shower with bathtub

How to choose a shower

In the beginning, we define what the product will not work. To close the bath will definitely be extra round, rectangular, without built-in tub and any other model, the size of which will create problems. At the first examination, we measure their products: The results are compared with the desired dimensions. The latter is determined in advance and leave at the same time reserve for the new household and sanitary equipment. Select intervals for the gaps to the cab service was not difficult. Then compare suitable products. We consider them the absolute benefits and advantages / disadvantages compared to other models. We check the quality: fasteners reliability, security, zero defects and appearance of the coating. A detailed examination of the function in. Interest should be taken to the control panel, the different modes, the principle of operation, convenience, availability of technological innovations. At this moment we should finally decide, you need a shower or did not.

See also:Shower tray with your hands

Choosing a shower enclosureShelves in the bathroomMirror on the wallWhite door in the interiorThe toilet in the cornerInterior with a chandelier with candles

The main stages of the manufacture of the shower with his own hands

manufacturing stages:

  1. The issue about the base.
  2. Supply of communications and organization of the outflow.
  3. Waterproofing.
  4. cab assembly.
  5. Improved containment.
  6. Check gidrokabiny in.

In theory it is possible to collect the whole shower of bricks oblitsevat tiles, install a glass door or leave the passage free. Build on the principle of a closed shower refers to the use of solid walls and shutters for opening. So it will be faster in many times, and better for ergonomics. The booth will receive an attractive appearance and compact size. Conventional shower gated collected with or without tray. The second option provides enhanced waterproofing. After selecting a base and isolation to arrange tap water used. For showers without pallet making screed with thermal insulation and a further protection against water. Cabins are usually mounted with metal bars - they secure the door leaves and the wall. Top of the soul, as a rule, leave open. Then be sure to improve tightness, include water and check whether anything is not leaking. After that, work can be considered complete.

To facilitate repair in the future between the shower and bathroom walls should keep at least a minimum gap!

Making the shower with his own hands

With tray

The first step is organizing waterproofing. The private buildings are allowed to deepen the floor pallet to make this element more capacious. The base can be built as a brick, but it is better to take the factory with any desired shape. Already at the next stage all the elements checked in the joints, starting from the bottom and ending with the walls and roof, if it is. See how the edges are flat and perpendicular. wall width are selected from 70-80 cm up to any reasonable limit. Then, before the start of assembly steps, a supply of communications and equip the ladder with a slope to drain. The next thing is mounted walls, doors, shelves, blender, and the rest of the equipment, in the intervals using the strap (a mount is more difficult). In this case, apply adhesive and sealant. In the assembled cab arrange waterproofing: handle all seams, joints and small gaps.

Shower with shower tray

without pallet

For multi-storey building - the idea is not very good. Improper installation lead to structural failure, and its instability would be noticeable immediately after assembly. Thus, the gradual build cabins without pallet starting with the founding of the waterproofing. After - install the drain channel with slope and work with all communications. On the floor and then make a screed of concrete. But before you pour it, develop the insulation and not further hinder polystyrene mats. We proceed to the next step waterproofing. In addition to the base, and the need to protect the screed. Apply any of the following:

  • mastic;
  • bitumen;
  • roofing;
  • asphalt;
  • polyester.

After the concrete has hardened, the lower cover being lined slip matte tile. We proceed to the installation of components and equipment booths: walls, doors, storage, crane. At the end check the resistance of the module.

Shower stall without pallet

Design bathroom with shower

The style of the bathroom depends on the color / graphics as well as a large variety of materials and textures do not provide equipment manufacturers. Bathroom Art Nouveau pick up the soul with dark glass, which is clearly visible pattern. Contemporary trends and high-tech strive to technological materials, simple colors, impressive transitions and lines, smooth and streamlined forms. Standard bathroom will look something like this, if you try to design and selection of plumbing. Sea, ship and pirate theme requires additional attributes, but worth the effort. Work on the design should always: somewhere to change lighting, somewhere to do permutation. The huge bathrooms are planning situation in dozens of variants. Benefits and impressive effect will be on a large shower with a bathtub right in the middle of the room. The compact bathroom should be beautiful place and arrange a shower, sink, washing machine and font, if available.

Design bathroom with showerSkylightBath windowTile wood on the wallsBlinds on the windowBuilt-in lights on the ceiling

conclusion

The choice between a shower and bathtub - a dilemma for residents. Ready option is usually not change, but in an empty apartment will work on the choice of appliances and measurements under plumbing. As a result, all must decide the functionality of a particular model. From the opportunities provided by the manufacturer depends on the willingness of the buyer to close your eyes to some inconvenience. People acquire simple and combined showers with square, round, angular, polygonal, curved shape. Together with gidroboksom may provide built-seats, bath or even a mini-sauna. Dimensions base sides are 70, 80, 90, 100 cm t. D. up to 150 cm. Its long side reaches 2 m or more in length. Height of standard enclosures ranges 190-230 cm. Because of design simplicity showers also collected independently of no more than a dozen major parts.