Each of us has a stick, or even a few. If they do not put in the same place, they can be lost. To stick never lost, they need to organize a permanent location. It is best to cope with this task sewn bag, pouch, which you can put multiple flash drives. Case in a master class from a dense fabric is sewn, the fastener has two buttons, inside pockets into four compartments.
necessary material
Sewing the cover we need:
- thick tissue (e.g., gabardine);
- Sew two buttons.
stages of work
Draw a chalk on a fabric two rectangles (width 14 cm, length 20 cm), add perimeter seam allowances - 1 cm.
We also need to detail pockets: draw a rectangle on the fabric width of 5 cm and 15-16 cm in length (the length of doing more than the width at the base part in order to get the pockets). Add 1 cm seam allowance on the four sides. Cut parts.
Detail for pockets necessary to mark a shallow way: on the edge of the left and right back down on the allowance to 1 cm, the middle part divided into four equal segments. We mark up the chalk line on the front side of the part.
The edge of the marked detail pockets to buckle 1 cm to the wrong side, baste contrasting thread.
Make a straight stitch on the sour cream line, sew on the front side of the part. Basting thread was removed. Edge process the zigzag stitch.
Put one of the prepared rectangles face up, is applied thereto for the item holders wrong side down, departing from the bottom to 3-3.5 cm.
Shear pins pocket with the main part of the edge of the products (1 cm left and right) and on the planned lines. Since the pocket longer body panel 1-2 cm, the upper part to distribute evenly over the bottom side.
We sew a straight stitch machine.
Put stitched part of the product face up and apply to it a second box, face down.
Shear pins on the perimeter.
We sew a straight stitch the perimeter, leaving a 5-6 cm is not zastrochennymi (so that you can turn on the face). Corners cut, to avoid compacting the corners bags. If the fabric fray, then the edge of the article, you can walk a zigzag stitch.
The figure below shows nezashity edge.
Our gut-wrenching detail on the front side.
Sewn along the outer perimeter of the details straight stitch, departing from the edge of 3 mm.
To the inner side of the buckle lower edge parts, thereby closing the open seam pouches. Hand sew a hidden stitch.
Down cover sew the parts of buttons with a recess.
Top cover sew pieces of second buttons.
Case ready. It remains only to put in his stick and stop being afraid that they will get lost in different locations.
