Skills, how to stroke a jacket, is owned by not every mistress. Many women, even if manipulated at home, often do it wrong. Deficiencies in the approach affect the external data of the elegant thing and gradually cause it to wear out.
At home, you can use the traditional iron, a steam generator for processing garments, a compact steamer for manipulation. With the use of steam generating devices, there are usually no questions, it is only necessary to choose the optimal temperature regime. It is much more difficult to use the iron as intended, without spoiling the capricious product.
Sequence of actions when smoothing the jacket
Before you stroke the jacket, you need to make sure the surface is clean. Small ignored spots under the influence of high temperatures increase in size, penetrate deeper into the fibers and begin to emit an unpleasant smell. It is not necessary to completely wash the product, it is enough to carry out its local cleaning and to walk a brush on all the elements.
The mode on household appliances is set depending on the type of fabric. As a layer between the material and the iron, various adaptations can be used. The order of processing a thing consisting of a set of elements is always the same:
- Pockets. Turn them to the wrong side and carefully iron, eliminating even the tiniest creases. To facilitate the process we use wet gauze. Then gently return the elements to the place.
Tip: After processing the fabric through a damp cloth, a little moisture remains on it. In order not to create favorable conditions for the development of mold, we also smooth the fabric through a dry cut of cotton.
- Sleeves, shoulders. Stitched from the wrong side. The most problematic in terms of processing places. They are recommended either to steam at high power, or pre-moisturize and process until completely dry. Without the use of a special narrow board, it will be difficult to achieve the desired result. In extreme cases, it can be replaced by a rolled up towel in a tight roll.
- Shelves, bottom, back. These elements are processed only from the front side. They are fairly level and do not cause problems. Lapel and collar. Small, but very important details, which are immediately striking in mint. We iron from the face through a very wet gauze at the maximum permissible temperature. Corners are working with a sharp spout.
These are the basic recommendations, in addition to which there are also specific requirements for processing fabrics.
How to iron the jackets from different types of matter?
Before you start ironing, you need to read the label carefully. Even if the conditions of the procedure are not indicated on it, we draw attention to the composition of the material:
- Models from cotton. Resistant to high temperatures, therefore the maximum figures are most often used. In addition to wet gauze, it is recommended to additionally moisten the fabric to achieve its maximum possible smoothing. Lining is processed in accordance with its composition.
- Linen products. Lining on them is usually not available, which allows for processing from both sides. Steam is welcome. Flax is almost impossible to smooth to an ideal state, so easy bruising is allowed.
- Jackets made of polyester and other synthetics. Rarely and infrequently. Stripping does not make the process easier, so it is not necessary to apply it. Processing is carried out with a warm iron.
- Woolen jackets. Wet gauze or very thin fabric are mandatory. The iron should not slide on the surface, just consistently apply it to the fabric. The higher the percentage of wool content, the lower the temperature, otherwise the product will show burns.
- Things made of silk. The natural cloth is not subject to ironing. Artificial is processed at the lowest temperatures. Spraying is unacceptable, after it stains remain. You can only use steam at a distance.
- Furry types of fabric, products with relief patterns look the same as wool, pressing iron.
With all these points in mind, you can count on a result that is similar to the effect of a dry cleaning treatment. The procedure, though troublesome, takes not so much time as it seems to many.
Read the article on how to iron the trousers with arrows