Like any household appliances, washing machines may eventually break down. When this occurs, the device reports the failure code on the display. washing machine lg error easy to fix, knowing their decryption. Consider all the washing machines lg error codes, their causes and remedies.
Ae code appears when leakages of different character. To remedy the problem, inspect the unit on all sides. Determine the location of the leak. Pay attention to the hoses and seal gum. Replace the bursting of tube or pad to resume normal operation stiralki.
CE: motor overload
The fault is not serious, but the help of the master may be required.
The reasons:
- drum heavily clogged things;
- defective electronic controller;
- defective drive motor;
- failure of the drum mounts.
Remedy:
- Open the door, remove the part of things and start washing.
- Using a multimeter, check the status of the controller and motor.
- Call a specialist. He will examine the drum and tell you how to fix it.
dE: washing machine hatch is locked
The error appears on the display when the device can not transmit the information electronics.
May be several reasons:
- between the door and the machine a foreign object;
- Door handle broke or deteriorated;
- failure of the door guard;
- faulty wiring leading to the hatch.
The error occurs in washing machines lg due to the broken door locks or fuses. Replace them with new ones, and the device will work.
Faulty wiring entrust master. Improper intervention can lead to serious trouble.
FE: tank washing machine is full of water.
Errors occur fe the user's fault or due to breakage of the components of the device:
- Improper use of detergent. A large amount of it in the compartment leads to the appearance of excessive amounts of foam.
- Broke water level sensor.
- Burned wiring in the sensor control water pressure.
- Clogged water supply valve.
- Malfunction of the controller.
Remedy:
- Choose high-quality washing powder for washing. Pour their amount recommended by the manufacturer.
- Clean the water supply valve and check it for contamination.
- Replace the water level sensor or buy a new one.
E1: in the machine sump water nalilas
Some of the reasons can be resolved by yourself. Several sources of violations:
- broke water leakage sensor;
- disrupted the integrity of the tank;
- hose burst and they appeared fistulas.
Replace hoses in which the integrity is broken. To repair the tank, need help master
HE: broken heater
Infrequent failure in the washing machine lg. The problem has arisen because of a circuit or burned heater.
Install a new heater, and for the second fault, contact a specialist.
IE: the water is not filled or filled very slowly
Machine for some time did not fill the tank with liquid:
- there is no water in the water;
- Hose has a fistula or leaned;
- wiring to the intake valve may be defective;
- problems with the valve;
- defective main control board.
Inspect all sides valve and rate the degree of damage. Check the voltage for all coils. The valve can be replaced, but in other cases, refer to the master.
OE: the water is not drained from the tank
Automatic machine generates an error if water is not discharged from the tank 5 minutes after completion of washing.
Experts identify the reasons:
- drain pump clogged filter debris;
- hose bent or busted;
- faulty pressure sensor hose;
- has failed airbag;
- breakage of the water level sensor.
Inspect drain pump. Check the condition of the hose connection to drain the water.
Remedy:
- To get rid of debris in the filter, pull out the accumulated debris.
- Check the hose. If he bent, straighten it and the water will begin to merge. If found to flow out of the tube, close the patch or replace the hose.
- If the sensor fault is detected, replace it yourself or with the help of the wizard.
PE: a problem with the level switch
The display shows information about the water level sensor error.
Identify several causes of the D code:
- breakage of the water level sensor in the washing machine;
- too high or low water pressure in the water.
Replace the water level sensor if the reason for it. When the malfunction is caused by incorrect water pressure, wait a while and then start the wash again.
UE: Incorrect balancing drum
Do not start washing due to incorrect position of the tank. The program will not start until the problem is fixed. Reasons lg arise due to improper use of the appliance. The drum is too overloaded with things, or linen laid enough.
Remedy:
- Open the door and check the condition of things. If they are knocked down in a heap, and the door opens with difficulty, pull out a part and start the wash program.
- When the machine was not enough clothes, add a number of things. Ideally, they should be of the same material and the same color.
tE: a problem with the water temperature
The code appears as a result of problems with TEN-ohm thermistor, or:
- fired heater;
- Code TE inclines to the temperature sensor check.
Remedy:
- Determine multimeter thermistor resistance.
- Inspect the wiring leading to the TEN-y.
Repair the heater or temperature sensor. If they can not be repaired, replace with new ones.
E3: determining an error loading
The machine does not start is not always due to overload. e3 code indicates controller failure.
Replace the part and run the laundry.
SE: failure of the Hall sensor
The sensor is built into the machine with direct drive.
The causes of the error:
- failure of parts;
- Wiring violation.
If the case is in the sensor, replace it and continue washing.
LE: Error UBL
Door locked device error can be caused by:
- low voltage network;
- breakage or door handles;
- broken door safety lock;
- Integrity wiring on the door lock;
- rotor may have cracks or breaks.
- the drum was a subject that prevents rotation.
Remedy:
- Check whether the door is closed.
- Replace the door, if it is badly damaged.
- Install a new door lock or fuse.
- Update the wiring.
- Broken rotor replace.
Inspect the inside of the drum for foreign objects and details. Remove them and repeat inclusion.
To resolve the errors, appears on the screen, lg washing machine, press the start button. Thus the action of the device will be transferred to the waiting state. Most errors occur because of the failure of the program. Therefore, do not worry. Instead, calmly disconnect the appliance from the wall outlet and turn after 15 minutes. Work can be resumed without repair.
