How to clean the bath of rust at home?

Every year the quality of tap water is getting worse and worse, especially in big cities. And those who did not dare to spend money on the filter, inevitably come across the appearance of yellow stains from lime and rust on the plumbing. And since washing in such a bathroom is not particularly pleasant, the question is how to clean the bath of rust at home. This is the problem you can solve by reading the recommendations from this article.

to the contents ↑

Rust in the bathroom - should it be removed?

Rust is formed due to the high content of heavy metals and other substances in the water. If you do not comply with the rules for the operation of sanitary ware, do not wipe the bath before dying after each water treatment, corrosion is washed on the surface and forms a persistent plaque. If you do not remove the rust from the bath at home, the layer of dirt will become thicker, its shade will become more pronounced. This - the aesthetic side of a phenomenon that does not cause much enthusiasm among the owners of apartments and private houses.

From a technical point of view, clean rust in the bathroom is also necessary. The reason is simple - the deposition of heavy metal suspensions eventually penetrate into the structure of the plumbing material and destroy it. As a result, the service life of even a very strong cast-iron bath is greatly reduced.

Important! Rust appears not only on a cast iron and steel bowl, but even on composite acrylic material.

to the contents ↑

Than to wash the bath of corrosion?

Depending on how much time you are willing to spend on removing unsightly plaque and how safe you are trying to do it, you can use one of the household chemicals or proven folk methods. Each of the methods outlined below is effective in its own way, so the choice is more acceptable for you.

Folk methods

To wash the bath of rust without damaging the enamel, you can use those tools and substances that you have available. That is, you do not have to spend money on purchasing household chemicals, which is not so cheap today. The best result is observed when using such methods.

Option 1

To clean the bath from rust at home in this way, you will need to do the following:

1. Take a convenient 0.5 l glass jar. Rinse it thoroughly and dry it.
2. Pour in 100 ml of ammonia and slowly add 50 ml of hydrogen peroxide - it is better to take a 6% solution.
3. Close the container tightly and gently shake.
4. Close the drain of the tub.
5. Wear protective rubber gloves.
6. Wet a sponge or rag in the solution and treat all spots thoroughly against corrosion. On the largest and darkest spots, apply a cloth moistened with a solution, and leave for a while.
7. Leave everything in this form for 30-40 minutes.
8. Rinse thoroughly with clean running water.
9. If necessary, repeat the procedure the next day.

Option 2

The combination of conventional kitchen salt with wine vinegar also helps to quickly remove rust from the bath. The following agents are used:

1. Mix 100 ml of wine vinegar and 2 tbsp in a glass heat-resistant container.l.salt.
2. Place the plate in the microwave oven and heat the mixture to 65 ° C.
3. Rub sponge soaked in a warm solution, all the stains from corrosion.
4. Leave it for 10-20 minutes.
5. Thoroughly flush the bath with clean water from the shower head.

Household chemicals

Among all the variety of modern household chemicals there are also many tools that will help you quickly clean the bath of rust at home without the need for its restoration. The most popular among owners are such brands:

1. Cif. Creamy agent is used for any type of bath, including suitable for a more delicate acrylic.
2. Santri. This tool dissolves the entire coating of corrosion, literally in front of your eyes for 5-10 minutes.
3. Domestos. This remedy is originally intended for cleaning the toilet bowls, but if your bath is in a rather deplorable state, applying it will be very beneficial. In addition, you will make a bath disinfection, which must be done at least once in a couple of months.
4. Comet. Under this brand is produced as a special product for cleaning baths, and universal pastes for cleaning any surfaces. By purchasing this remedy, you can completely bring your home into the proper state of purity and order.
5. Pemolux. This cleaning is better to apply for cast-iron sanitary ware, covered with enamel. It will help to clean the bath of rust at home, even if the spots are very complex and old.
6. San ​​Klin, Mr. Chister, Triton - suitable for removing corrosion if you installed an acrylic bath. Too aggressive acids in the composition are not present, as well as abrasive substances, so the agents perfectly cope with the task in hand, without damaging the surface.

Important! When using any household chemical products, be sure to use personal protective equipment. In some cases, only gloves are not enough, but a respirator and glasses are required. Especially if household chemicals have a pronounced toxic odor and has aggressive acids in the composition.

to the contents ↑

Useful advices:

1. To ensure that rust does not accumulate on the surface of the bath, after each showering, thoroughly wipe the surface to dryness.
2. Perform periodic cleaning to remove light deposits at least once a week. For this, you can use vinegar, soda or any household chemical means you choose.
3. If the bath is not bleached to the desired quality, and you can not afford to purchase a new one, make a restoration. Using modern acrylic liners, you can update the plumbing cup with minimal expenses and enjoy a pleasant pastime during water procedures.

Now you have in the arsenal of several ways with which you can easily clean the bath of rust at home. Use them at an early stage of pollution, then you do not have to spend much time and the result will be better.