How to clear a frying pan from the deposit?

Each mistress simply dreams quickly and without physical effort to clear a frying pan from a deposit. But very few people know that this is not only an aesthetic problem, but also a threat to health. Nagar, when heated, secretes carcinogens, which, to put it mildly, are not good for health - they at times increase the risk of oncological diseases. This is just one of the reasons why you should not "run" your dishes. But if this has already happened, then we will share with you the recipes, how and what to clean the frying pan from the deposit and restore it for safe use.

to the contents ↑

Where to start?

Before starting any cleaning procedure, you need to find out what material your frying pan is made of. Whatever it was, you can buy a special detergent in stores for it. Melamine sponge is also very useful.

If you do not want to spend money financially, then you can use improvised tools that can be found in almost every home, and already tested in the older generation ways.

to the contents ↑

Than to clean cast-iron frying pan from a deposit?

If your frying pan is cast iron, then the problem of sludge is especially important for you. Such frying pans are most prone to the appearance of poorly washed soot. But they are also convenient because they are not afraid of almost any experiments in terms of cleaning. Therefore, in order to clean cast-iron frying pan from the deposit, you will be approached by various means.

Auxiliary substances

To remove carbon deposits on the inner surface of the frying pans, salt, vinegar and soda will help. Several tablespoons of salt pour vinegar in a frying pan, so that the latter completely covers the bottom of the vessel. Bring the mixture to a boil, then add a couple of spoons of soda, set a minimum fire on the stove and wait for all the liquid to evaporate. Now just rinse with water.

Important! A small deposit can remove ordinary table salt. Fry in a frying pan wet salt, after - rinse with water.

Household soap

Household soap is not only able to remove stains from your clothes. It will also help with the cleaning of cast-iron dishes. Sift in a large saucepan or basin on a large grater soap and pour water. Place the frying pan there, which you need to clean. Let it "cook" for 2 hours and you will be able to appreciate the amazing result.

"Magnetic" mixture of

Another option for cleaning utensils from carbon deposits is to use silicate glue and soda ash. Place the frying pan in hot water with the addition of the contents of one tube of silicate glue( you can replace it with PVA glue) and a small amount of soda ash. You can also add half a bar of laundry soap. Heat on a small fire for about 2 hours a mixture of all these ingredients with water. After this, wash the pan with clean water.

Important! This method is quite dangerous for the health of the hostess, so use glasses, a mask and gloves, ensure a good ventilation of the room.

Acid

Stir the vinegar in water in a ratio of 1: 3.Put a frying pan with this solution on a slow fire for 3-4 hours. Do not forget to monitor the liquid level. Ensure good ventilation of the room, since the smell will be intense.

Sorbents

Activated carbon not only has a beneficial effect on our body, it also "cures" of carbon deposits and cast-iron dishes. Crush the activated carbon package and sprinkle a damp frying pan. After an hour, clean it with any dishwasher.

Environmentally friendly way

If you have the opportunity to perform cleaning procedures in the open air, then the sand cleaning method is suitable for you. Pour sand into the pan and put on slow fire for about 3 hours. After that, tap on the outside of the frying pan and you will see how the carbon deposits easily from the surface.

Important! This method is desirable to use only on the street, since the odor released during the process will not be entirely pleasant. Yes, and the sand itself to carry in a clean house is probably not very desirable.

Alternative method for bold

The blowtorch can also be used for cleaning utensils. This method requires compliance with all fire safety rules. Bring the outside of the pan under the torch of the lamp. Nagar will disappear from the surface just before your eyes. This method is quite effective, but requires special care.

Important! To prevent food from burning during frying, after cleaning the frying pan, salt it in it until it turns brown. After that, heat the vegetable oil in a frying pan.

Cleaning without cleaning agents

Open fire will help to remove not only the soot inside the frying pan, but also to clean the frying pan from the sludge from the outside. Just burn the frying pan on the fire, then wash in plain water. You can do this at home on the stove, but then be prepared for the fact that it will be impossible to stay in the room for a while. During the procedure itself and a couple of hours after it is better to keep the window in the kitchen completely open, leave the working hood, and all important and valuable items, clean the dishes in boxes.

to the contents ↑

How to remove rust from cast iron?

Scrapers made of steel or copper wire will remove rust from the cast iron. To help you make an abrasive paste made of soda or salt, mixed with a little water.

For cleaning the rust on the surface, use cheap toilet cleanser. It contains about 20% hydrochloric acid, which dissolves rust and turns it into an easily removable powder.

Important! All parts that have a brilliant coating, when in contact with hydrochloric acid, lose their beautiful appearance. Consider this when using a toilet cleaner.

to the contents ↑

How to clean the frying pan from the deposit, if it is made of aluminum?

If you have an aluminum frying pan, then be careful with it when cleaning. This metal is very soft and ductile. It is sensitive to mechanical stress, hard metal scrapers and abrasive cleaners.

Given all these features, the best ways to clear the pan from the deposit are:

• Bring to the boil in a frying pan water with two tablespoons of citric acid. Leave on a small fire for another 15-20 minutes. Drain the solution and rinse the frying pan with clean water.
• You can use baking soda. After applying it to the dirty surface of the dishes, rub it with a soft washcloth.
• Make this solution: 10 g of sodium tetraborate( pharmacy drill), a glass of warm water, a couple drops of ammonia. Using a sponge, treat the dirty surface. After - rinse well with water.

to the contents ↑

How can I clean the frying pan from carbon if it has non-stick coating?

Mistresses increasingly prefer non-stick coatings in the selection of frying pans. And this is understandable, because such a coating protects the inside of the dishes from unwanted and harmful carbon deposits. But here is what to clear such a frying pan from the deposit on the outside?

Clean frying pans with non-stick properties should also be very carefully and carefully. To wash the frying pan from the sludge from the outside, you can use the above methods with the help of soda, laundry soap, salt with vinegar and soda, soda ash and silicate glue.

Important! If the deposit began to form on the inside surface of a pan with non-stick coating, then it is dangerous to use such utensils. This indicates a violation of the surface coating. It's time to change this frying pan for a new one.

To avoid burning problems in the pan, wash it immediately after each use. Do not leave this work for tomorrow, because the dirt is even more strongly absorbed into the surface and it will be more difficult for you to bring the dishes to a clean look.