Than to wash a tile from a grout after repair?

For facing operations, joints and seams between ceramic tiles are treated with grout. This procedure is necessary to ensure better adhesion of the surface and give it a more attractive appearance. But often after repairs on the surface of the tile you can see unpleasant traces of dried building materials. In this article we will tell you how, and most importantly - how to wash the tile from the grout after repair.

to the contents ↑

Where to start?

In order to remove traces of building materials from ceramic tiles and tiles you may need the following tools:

• water;
• solvents;
• detergents and cleaning compounds;
• soda;
• liquid ammonia;
• vinegar;
• lemon or citric acid;
• abrasive sponge.

Important! In order to safely wash the tile from the grout after repair, do not experiment with any improvised means in your home. Especially this rule applies to construction and household chemicals. The result can be very deplorable - there will be a need for new repairs due to a completely damaged new decorative coating.

to the contents ↑

How to wash the tile after repair from the grout?

In order to avoid the problem of cleaning the grout from the surface of the ceramic tiles, it should be remembered that the most easily and quickly such contaminants are removed during the repair process, until the mortar mixture has hardened.

After completing the lining of a small area, you should check how well the mortar grabbed and proceed to remove dirty droplets and marks on the ceramic surface. To check the condition of the grout:

• Apply a damp cloth with a damp cloth.
• Observe the behavior of the material.

Important! The result is estimated by the following criteria:

• If the grout begins to swell and go beyond the boundaries of the joint, then this behavior of the building material indicates insufficient curing and a low degree of adhesion.
• If after dipping the changes you do not notice, then everything is fine and you can start cleaning the surface of the remnants of the building material.

Smoothing technology for grouting

Cleaning the tile from the grout after repair can be done in two stages:

1. Dry cleaning. This procedure is carried out after laying a small section of tile by rubbing the surfaces with a special float. Keep the tool at right angles to the coating.

Important! It is recommended to clean the cleaning movements diagonally to the surface of the joints. It is this direction that will help you avoid damage to the grout that has not frozen to the end.

1. Washing the surface. To wet cleaning of the surface of the tiles should be started after the grout partially hardens. For this procedure, it is recommended to use a piece of foam rubber, which is abundantly wetted with water.

Important! Remains of dirt from a glossy surface clean with a stiff cloth, felt or burlap. This procedure will avoid the occurrence of divorces on the smooth surface of the tile.

to the contents ↑

How to prevent contamination?

If you yourself do a repair in the bathroom or kitchen, then it's very difficult and sometimes impossible even to avoid getting grout on the surface of the tile and linoleum. Even in the case when professionals are working, there are often spots on the surfaces.

There is a possibility to protect the surfaces from contamination as much as possible, and also to protect your hands from unpleasant consequences:

• In order not to look for the most suitable means for cleaning the tile from the grout and not think how to wash the flooring, try to completely cover the floor with cellophane before performing the repair.

Important! Place the joints of the laid protective cover with a wide adhesive tape or paint tape, and secure the edges securely with furniture staples or a press.

• To avoid health problems, experts recommend the use of personal protective equipment during repairs - gloves, mask, bathrobe.
• To prevent the material from seeping into the surface of the tile during seam treatment, glue the edges of the tile with a paint tape that is easily removed and leaves no marks on the tile. This technology will also help you to create smoother and more smooth seams, that is, you will greatly accelerate the entire stage and finish the repair faster.

to the contents ↑

How to remove the dried and old grout from the tile?

If for some reason you could not wash the tile from the grout immediately after the repair works and the mortar had frozen on its surface, then the following tools will help you cope with the contamination:

Method No. 1

To remove a solution that managed to harden in the poresceramic tiles or got on tiles with a glazed surface, a very practical method of cleaning is the use of a specially designed acid wash to remove cement residues.

This product includes substances that react chemically and dissolve traces of mortars such as grout, glue and cement, allowing them to be washed away from the ceramic tile as quickly and easily as possible.

Important! For effective cleaning, apply the product to the surface and after 5 minutes repeatedly rinse with plenty of water.

Method No. 2

A simple coating can be removed from the surface with a gel dishwashing detergent. To do this, follow the instructions below:

• Dilute the gel with water.
• Wash the tile with a conventional kitchen sponge.
• After 10 minutes, treat the tile with a soft-nosed brush.
• Remove all traces of a cloth dampened with warm water.

Method number 3

To get rid of strong contaminants on the tile will help baking soda. Use this tool to wash the tile from the grout after repair, as follows:

• Moisten the surface of the tile with water, for which you can use a conventional spray gun.
• On a wet tile, apply a small amount of baking soda and gently wipe the tile with a brush.

Important! Do not use a brush with a metal bristle, as it can scratch the tile.

• Gently, but at the same time, carefully work out the seams on which mold or fungus may appear.
• Wash the tile with clean and warm water.

to the contents ↑

Useful advices

To ensure the highest quality and safe cleaning of the tile from the grout, adhere to the following rules:

• All work should be carried out in rubber gloves that protect the skin of your hands from the effects of the chemicals used and prevent its drying out or the occurrence of allergic reactions.
• Cleaning should always start from the bottom, but it is recommended to clean the tile from above.
• In order not to damage the trowel, it is recommended to protect it with epoxy paint or paint tape during cleaning works.
• When using household chemicals, be sure to read the instructions and dilute the substance in the required proportion.
• To bleach darkened seams, use a medical solution of hydrogen peroxide, which should be applied to the surface and left without washing off.

In this article we have shared with you the most effective recommendations, how and what to clean the grout from the tile, so we sincerely hope that you will be able to quickly and qualitatively remove all traces of building materials from the facing surface without harm to the tile and the health of the tenants.