How to wash holofayber

Today, many things sew using holofayber, so the question of how to wash holofayber - quite relevant and can arise for everyone. You can easily solve this problem if you become acquainted with the materials of this article.

to the contents ↑

What is a holofiber?

Before you start an action to clean things with this material, you should know what it is all about. Hollofayber is a modern insulation based on polyester microfiber, which in its characteristics in many respects surpasses the more familiar fluff and sintepon. At the same time, it is very practical and convenient to care for.

Its distinctive properties are:

• high wear resistance;
• excellent thermal insulation - keeps the temperature even if air is -25C;
• light weight;
• quick return of the original form after crushing;
• low moisture absorption;
• ecological purity and hypoallergenicity.

Important! It is because of this complex of excellent characteristics that it is widely used for filling pillows, blankets, jackets, warm pants.

to the contents ↑

Than erasing a holofiber?

As already mentioned, hologofayber is very practical. This is evident in the selection of suitable means for washing. To properly clean the material, you can take almost any material convenient for you:

• oxygen powder;
• liquid detergent concentrate;
• powders or gels for delicate washing;
• is an ordinary household soap.

Important! Even with a slightly alkaline solution, the mud lags well behind the fiber.

to the contents ↑

At what temperature do you wash the holofiber?

The second question, which for sure you will be interested in - in which mode to erase things with such a heater. The answer is very simple:

• hand wash;
• machine wash.

Important! The temperature you can set any - the filler will not lose its properties even at the rate of 70-80 ° C.

to the contents ↑

How to properly wash the holofiber?

To clean the dirt well from a jacket or pants, follow the following procedure:

1. Dilute any detergent or soap in warm water in the pelvis. Soak the thing for 30 minutes.
2. Thoroughly rub off places of greatest pollution - collar, pockets or cuffs. It is even acceptable to use a brush for friction.
3. Download the item to the washing machine with a suitable dose of powder.
4. Erase in any convenient mode.
5. Install a double rinse so that there are no stains on the surface, and chemical particles do not accumulate inside the fibers of the hullfiber.
6. Use the intensive spin mode without fear of deformation of the thing. In the drying process, it will quickly take the original form.
7. Remove from the machine, shake the thing well.
8. Hang for final drying in a suitable place in your home.

Important! Please note that the hull is drying very fast. Within a few hours you will be able to dress a thing.

If you wash pillows or blankets, you can skip a few steps. In this case, the sequence of your actions will look like this:

1. Prepare the wash hand basin with the detergent dissolved.
2. Wipe the blanket or pillow with a dabbing motion. Do not soak!
3. Rinse well and wring well.
4. Leave in the pelvis until almost completely dry.
5. Move the erasable object to the balcony for final drying.

Important! If you decide to erase such items in the typewriter, set still the mode of fast or delicate washing.

to the contents ↑

Useful advices

• To ensure that a thing from the holofiber works as long as possible, do not erase it very often.
• Do not use a strongly heated iron for drying and smoothing the surface. Suitable temperature - no more than 70С.
• If the bedding with such a filler after a while still deformed, restore the structure of the fiber. To do this: straighten the object, remove the fiber and comb it well with a brush for animal hair. The material will again take on its original form.

Now you know all the subtleties, and the question of how to erase the holofayber will not bother you anymore. And if you stick to our recommendations, then this process will not take you much time and energy.