The best hammers from buyers' reviews

Several decades ago all hammers were surprisingly similar to each other. Their handle was wooden, and the head on it often held very unreliable. Only the size of the instruments was different. Now the producers of hammers go to all sorts of tricks to win the attention of the consumer. There are tools with a metal handle, and now almost all of them are supplied with a rubberized coating. In today's article, we tried to mention the best hammers in various classes. You are waiting for and locksmiths, and nails, and real sledgehammers. All selected models are similar in one - their purchase does not cause disappointment.

hammer which company to choose

Logic dictates that create high-quality hammers easiestmanufacturers of axes. However, they rarely do it. Most of all these tools are produced by companies that are familiar to us with pliers and spanners. They have access to a large amount of tool steel, which is the most important component of any hammer. It is interesting that domestic producers of hammers feel very well. Their products are completely different from what went off the assembly line in Soviet times. Now these tools can be trusted without doubting their capabilities.

The most popular hammers in our country are the products of the following manufacturers:

1. FIT

2. MATRIX

3. SANTOOL

4. STAYER

5. STURM

But this in no way means that high-quality productsare produced only by the five above-mentioned firms.

The best hammers

KAPRIOL 12301

Recently even the sledge hammers have been supplied with a fiberglass handle. Such a coating will not allow the tool to slip out of the hands, even with overly active backswing. Speaking specifically about KAPRIOL 12301, it should be noted not only the material of the handle, but also the optimum weight of the sledgehammer, which is 3 kg. Also successful work contributes 90-centimeter length.

The tool received a square-shaped firing. It's cool on the handle - no trouble waiting with such a sledgehammer. Most stores provide a guarantee for a period of 6 months. One can only regret the high cost of the instrument - products with a wooden handle have a smaller price tag, which is why their popularity is higher.

Advantages:

• Reliable square bob;
• A fiberglass handle is used;
• The weight will appeal to most buyers;
• Optimum length.

Disadvantages:

• Not everyone will want to spend such money.

FIT 45232

Tools under the FIT brand often receive a yellow-black handle. FIT 45232 is no exception. This hammer turned out to be quite long and heavy. Specifically, the weight is 4 kg. This allows you to break any brick wall with a swing! What is important, the handle is made of metal - it is impossible to break it, unless the tool falls under the tracks of the tank.

The boom at the sledge hammer, as it should, is square. It is made of pressed and heat-treated steel. The upper part of the handle is fiberglass. The hands will hold on to the part that has a rubber coating. The tool will not be able to slip out accidentally, no matter how hard you try. And the manufacturer tried to lower the price tag. And although the sledgehammer still can not be called a budget, it is cheaper than many competitors with a similar grip cover.

Pluses:

• Very heavy weight;
• There is a fiberglass and rubber coating;
• Can serve almost forever;
• A great hit.

Disadvantages:

• Some people seem too heavy.

The best metal hammers

Inforce 59035

Hammers with a well-thought-out design are usually quite expensive. But the Inforce 59035 can be bought for very little money. Partly because of this, buyers leave entirely positive reviews. Although it should be noted that the tool was really successful. It has a 500-gram weight, and its handle has a fiberglass coating. Moreover, there are finger-holes on it! All this will definitely not let the hammer slip out during work. Also it will not let you get tired - you will make a minimum number of actions.

A nice bonus is the presence of a through hole at the end of the handle - this allows you to hang the tool on the hook. As for the striker, it has a traditional shape, and its hardness is 10% higher than required by the DIN standard. To the handle it is attached by the method of injection gluing with epoxy resin. And if you still remember about heat treatment of the striker, you can rest assured that the hammer will serve as long as you like.

Advantages:

• For bonding epoxy resin was used;
• Rubberized handle was created from fiberglass;
• There are tabs under the fingers;
• The surface of the striker was heat treated;
• The lower part of the arm has an extension;
• There is a hole for hanging;
• Adequate cost.

Disadvantages:

• Weights for some works will not be enough.

Technics 315100 ДТ /24/ 6

An excellent hammer for those who need a tool heavier. The weight of the product is exactly one kilogram. This allows you to quickly drive in a very large nail. His bob has a traditional combined shape. It is made of steel 45. The handle here is also fiberglass. The rubberized construction not only does not allow the tool to slip, but also reduces vibration.

The length of the product is 370 mm. At the end of the handle, there is a well-defined opening, which simplifies the storage of the tool. In general, the hammer Case Technics 315100 has no serious drawbacks, especially if you recall its low cost. The only thing that can confuse is the lack of groove for fingers, which one of the competitors can boast of.

Pluses:

• For sale at a low price;
• There is a hole on the handle;
• Bojok was created from steel 45;
• Very robust construction;
• Fiberglas handle, securely fixed in the palm of your hand;
• Slaughter kilogram weight.

Disadvantages:

• None.

The best hammers of the mason

ZUBR MASTER 2015-05_z01

The Russian manufacturer affectionately calls his creation a hammer-kirochkoy. This is explained by the fact that the tool is not a full-featured tool - it affects the 500-gram weight. However, it will nevertheless become an indispensable assistant to any mason. The product is useful for various construction works, and it can serve for a very long time - the manufacturer assures that the boom here has an increased wear resistance. Some questions are caused only by a handle made of wood.

Tool steel 55 was used for production of the tool. The working surfaces, which is important, were hardened - that's why chips and scratches on them appear extremely slowly. It's hard to say what is missing here. It is possible that it would seem strange to some people that there is no hole, because of which the hammer will have to be stored in a tool box.

Advantages:

• Bojok is made of tool steel of mark 55;
• The work surfaces are hardened;
• Relatively low price.

Disadvantages:

• The wooden handle does not inspire confidence;
• There is no hole on the handle.

Sturm 1010-05-600

This mason's hammer may seem very small. But first of all you should pay attention to weight. And here it is equal to 600 grams. This is quite enough for percussion work with stone, brick or concrete. A two-sided boom was made of solid steel, but its manufacturer decided not to name it. Nevertheless, buyers note the resistance of the striker to almost any load.

The handle of this tool is two-component. It can be considered as the basis of steel, which gradually flows into a hammer. On top of it is a fiberglass mass with three notches - they are conveniently placed on the fingers. All this contributes to the fact that during work the hand does not slip at all.

Advantages:

• Long service life;
• Not afraid of serious loads;
• There are finger grooves on the fiberglass;
• The hand does not slip at all;
• The end of the handle is intentionally expanded;
• The optimum weight for such a hammer.

Disadvantages:

• The price may seem slightly overestimated.

The best inertia hammer

SANTOOL 030833-675

This type of hammer is also called recoilless. In people, such a tool is called kiyankoy. All such hammers are very similar to each other, their design is reconciled over the years. Specifically, the SANTOOL 030833-675 is 320 mm long. At the end of the handle here is a thickening, which can serve as a stand. The boa also has a 50-millimeter diameter, which is enough in most cases.

Advantages:

• Optimum length;
• Reliable and calibrated design;
• Decent diameter of the striker;
• Weight is 680 grams.

Disadvantages:

• May seem expensive.

The best hammer

Unipro 16148U

Sometimes a hammer is not required in order to drive a nail or break a wall. In some cases, this tool needs to handle damage over a large area. In particular, a special hammer is carried out body repair. This tool is called straightening. If you are looking for it, then look at the Unipro 16148U.This hammer comes with two nozzles. One is made of rubber, and the other is made from an elastic polymer. This allows you to choose a nozzle for a specific surface.

The basis of the hammer was made of steel, for more beauty it is polished. On the handle is a rubber coating, not giving the palm slips even if it sweated. The weight of the product is 500 grams - this is the optimal parameter for the straightening hammer.

Pluses:

• Cute appearance;
• Two exchangeable nozzles included;
• Very high reliability;
• There is a rubber coating on the handle;
• The ideal weight for such a tool;
• The price should please everyone.

Disadvantages:

• None.

The best hammers of the

Bahco 485

When repairing the roof and solving other similar problems, you will definitely need a hammer, supplemented with a nailer. A good choice of roofer will be the Bahco 485. This tool at the same time seems simple and beautiful. They use a steel handle, on top of which is put on a rubber lining. The hammer does not slip at all, even though there are no grooves for fingers here. It should be noted that the inside of the handle is hollow, so the instrument weighs just over 600 grams, and this despite the 308-millimeter length.

The work of the roofers will be carried out using a steel striker. On one side is the square shock part. Whether it is hardened, it is not reported. But looking at the price list, in this matter you stop doubting. On the other side of the striker is a nailhead. A nice addition is the magnetic holder - a rare visitor in hammers.

Advantages:

• Very reliable construction;
• On the metal handle there is a rubber lining;
• There is a nail driver;
• The location under the nails is magnetized;
• Not a very big weight;
• Optimal for roofing work dimensions.

Disadvantages:

• The cost is very high.

Vira 900121

A relatively simple hammer. Its handle is made of metal, to make it easier to make it hollow. The bottom half of the handle is covered with rubber - this is done so that the palm of the tool does not slip. For greater reliability, the founders have hardened the steel used here. This instrument weighs no more than 600 grams, so that the hand during work at altitude is almost not tired.

With regard to the striker, it, like a roofing tool, has a shock surface and a nail. With the help of Vira 900121 you can not only hammer nails, but also smooth the edges of the roofing. But the most important thing is that they do not ask for very big money for this product!

Pluses:

• Created from hardened steel;
• There is a nail driver on the striker;
• The handle is able to boast a rubber coating;
• Slight thickening at the end of the handle;
• Optimal weight, which will suit any roofer;
• There is a magnet;
• Not the biggest cost.

Disadvantages:

• Not available.

What hammer to buy

1. KAPRIOL 12301 should be bought in case you need to start destroying walls, old furniture and some other objects. This tool has a three-kilogram weight and 90-centimeter length. But its main advantage is in the fiberglass handgrip, which will not allow the sledgehammer to slip out of your hands accidentally.

2. If you think that 3 kg for a sledgehammer is not enough, then pay attention to FIT 45232. The weight of this tool is increased to 4 kg. Of course, there are also heavier sledgehammers, but they exhaust physically very quickly.

3. If we talk about traditional locksmiths, then the greatest admiration is the Inforce 59035. The design of this tool is thought through to the smallest detail. There is even a thickening at the end of the handle, which, together with the recesses for the fingers, will not give the hammer the slightest chance of slipping. You definitely will not be disappointed in the purchase of such a tool!

4. The hammer is twice as heavy as Technics 315100. It is a tool from a domestic manufacturer, also equipped with a fiberglass handgrip. Many buyers liked not only its design, but also a low price tag.

5. Hammers for a bricklayer are slightly more expensive than conventional hammers. This is clearly seen in the example of ZUBR MASTER 2015-05_z01.This product can be recommended to those who still want to save money. It has a wooden handle and a comb made of steel 55.

6. A Sturm 1010-05-600 is a little better for a bricklayer. The weight of this instrument is brought to 600 grams, and on its handle there are notches, in which the fingers of the worker are perfectly placed. But this model is more expensive.

7. In case of searching for a quick-action hammer, you can choose SANTOOL 030833-675.This tool from the Israeli company has a 680-gram weight and 32-centimeter length.

8. For body repair or any similar purposes, you should choose Unipro 16148U.This is a straightening hammer that offers two replaceable nozzles. Its weight is 500 g.

9. Bahco 485 is suitable for roofing works. This tool has not only a square impact surface, but also a nail driver. High cost is due to the magnetized place under the nails and the maximum service life.

10. Very little worse than itself in roofing works shows Vira 900121. This hammer also has a magnet, and even in its composition there is a ledge for leveling roofing materials. At the same time to buy the instrument will leave little money.