How to make a patch on the jeans between the legs?

I guess everyone had a situation where favorite jeans started to tear and wipe from frequent socks. You can not put on such things, but throw it away - it's a pity. To repair your favorite pants, depending on the degree of their gap, you can put a patch or sew. In order that you do not part with your favorite pair of trousers and they do not lie "dead weight" in your closet, we'll tell you how to make a patch on the jeans between your legs.

to Contents ↑

Sew Insert

This is the most common and reliable method that can handle even large enough holes and fraying. To date, there are a few fairly simple ways of sewing a patch.

Method number 1

You will need the following materials:

• Threads that are as close to the color of your jeans;
• Threads identical to those with which the product is delayed;
• Fabric patterns that will serve as patches - they should be similar to the color of your trousers;
• The tailor's marker or chalk;
• Scissors;
• Ruler.

Important! For brave and extraordinary personalities, you can use scraps of leather or a completely different fabric.

In order to put a patch on the jeans between the legs, we must adhere to the subsequent algorithm of actions.

• To begin with, you need to wash your jeans and iron it well.
• Cut out the pieces of the desired size. They also need to be washed and patted.
• On top, take the step and back seams( approximately to the middle).
• Using a ruler and a marker, on the front side make a marking of the piece, which will be later cut out.

Important! The rubbed place should be located just beyond the cut line.

• Make allowance for the seam about 1-1.5 centimeters. To do this, you must draw another line parallel to the first.
• Cut the damaged tissue along the first line.
• Cut the shred to the second leg and perform the same operation: draw the layout, add the allowance and cut out.

Important! Be vigilant, since the cut pieces and allowances should be exactly the same.

• The next step is to build a patch pattern. To do this, the cut out shred must be attached to the thick paper and traced exactly along the contour. Also, do not forget about the allowance from the side of prying to the jeans.
• Cut out all the necessary parts.
• Transfer the pattern to the denim fabric and cut out the patches.
• Fold the top and bottom of the patch face to face. Attach it to the jeans along the line of allowance.
• Turn the edges and trim the excess.
• The bottom of the seam on the front side must be turned off and lay one or two lines of thread identical to those that were delayed your jeans.
• Face to face on the back, attach to the jeans ready patches and stitched them.

Important! At this stage, you need to make sure that both sides match and are on the same level.

• The edges should be machined with a "zigzag" seam.
• On the front side, unscrew the inserts, lay a seam on them with threads to postpone, wrap it.
• Trowel the middle back seam, secure the end of the previously peeled seam.
• On both sides, stitch with threads to stitch the seams and secure the ends.
• On jeans it is necessary to make a marking of a step seam.

Important! If the jeans at the seam are also wiped, you need to draw the line so that the scuffs are hidden by the seam.

• Stitch the seam and stitch with thread for stitching.

Important! For this method, an excellent option will be the patches that are made of their same jeans. You just need to shorten them a little, and cut off the holes or scrapes with cut pieces.

Method # 2

You will need:

• Scrap for the patch;
• Threads in fabric color;
• Sewing machine;
• Scissors.

Procedure:

• Cut a piece of denim that is slightly larger than holes or worn. It must completely cover the damaged area.
• Turn the jeans on the wrong side and sew a hole with a zigzag stitch. You must make a seam in such a way that the hole is no longer there.

Important! Before stitching, attention should be paid to the direction in which the denim thread is located. The line must go parallel to them.

• Attach a patch from the wrong side.
• Sew it to the product with a "zigzag" seam.
• Turn the jeans over the front side and secure the hole with a straight stitch.

Important! Straight line should be sewn on the sewing machine by reverse movement.

• If the threads of the jeans are visible, this means that there is not enough stitching frequency. So you can add a few more stitches.
• Remove the jeans on the opposite side and cut off the extra edges of the patch.

Important! You can stitch the patch upward. So you get rid of the ill-fated hole and get an unordinary decor.

Method # 3

This method is much easier than the previous ones. But despite its lightness, it allows you to fix the jeans rubbed between the legs so that the result will be an almost invisible patch.

You will need:

• Iron;
• Special patchwork fabric( it can be purchased at the sewing store);
• Threads in the color of trousers;
• Sewing machine.

Procedure:

1. Straighten and smooth the damaged area on the jeans.
2. Using an iron, attach a patch cloth to the inside of the trousers.
3. The zigzag seam should be applied from the front side. Stitches try to do directly on the weave, repeating the texture of the material.

Important! To ensure that the finished patch is not noticeable, you should stitch the seam back and forth. First, you need to do this in a crosswise direction, and after - along.

to the contents ↑

Sew the wiped jeans

Repair the wiped jeans between the legs and in other ways.

For this you will need:

• Flizelin;
• Threads in color;
• Needles;
• Iron;
• Sewing machine;
• Scissors.

We begin to repair the pants:

• Take your jeans and measure the abrasion or hole.
• Measure out a piece of non-woven fabric, equal in size to the damaged section of trouser fabric.
• Attach the non-woven fabric to the worn place on the underside of the product. Iron it with a hot iron.
• Check the strength of the fixed non-woven fleece.

Important! If the fleece after ironing is behind the fabric, it should be ironed iron again.

• Next, you need to sew a damaged machine with a sewing machine. If the hole or scrapes are minor, then at this stage you can end. Otherwise, it is still necessary to impose an additional patch and flash it.

Important! The machine seam should be longer than the damaged area and go behind it.

to the contents ↑

What if the jeans can not be repaired?

• In case your jeans are completely not subject to repair, and you can not part with them in any way, you can transform them into ultra short shorts, which in this season are at the peak of popularity. Add to them a few more holes, fringe, embroidery or other decorative accessories. Thus, you will become the owner of a trendy thing, and it will not even enter anyone's head that earlier they were old rubbed jeans.
• If you have sewing skills, you can change your jeans trousers to a skirt or a bag. The rest of the fabric can be put on a barrette, strap or decorative patches.
• If the above options do not suit you and you would like to keep the product in its original form, you can add extra holes and scuffs to your jeans. Thus, you will create a completely new design, without changing their shape.

Important! For an extreme case, you can put at least some patches and use this thing exclusively at home, for example, during repairs.

The wipes and holes on the jeans, located between the legs, is a very hard-to-reach place, which can not always be gently stitched. But it's still possible. You only need to be patient and start a fairly monotonous work. The main thing is not to forget to apply the above-mentioned advice of our experts in practice. Thanks to them, you can not only repair your favorite pants in a short time, but also extend their lives for at least a few more seasons.