How to clean the electric stove from dirt, traces of grease and scale in the home?

The outer parts of the plate, including the electric one, can not always remain perfectly clean, because even with a very careful handling, they sometimes get splashes of cooking food. If you do not delay with cleaning, then wash the functional surface of the household appliance and its individual elements will not be difficult.

If you do not get rid of the carbon in time, then after some time you will have to use aggressive tools that can damage the cover of the device, which will negatively affect its condition. For regular cleaning of electric cookers, experts recommend the use of soft profile products, and with strong soiling it is better to use folk remedies.

Rules for processing the hob depending on the type of material

Cleaning begins with the impact on the cooking surface. The means and the cleaning option are selected depending on the type of material. Among all the variety of modern plates, it is possible to distinguish two sets of devices:

• With a metal surface. Stainless steel panels look impressive, but their polished surface is quickly covered with stains and stains. Without leaving a trace to get rid of fat and other traces will be obtained only with a timely response to pollution. Fresh stains on the panels of such a plate should be immediately cleaned with special means. On a more dense or dried up plaque, it is necessary to first apply a little soap solution and clean the formation in half an hour. Metal normally reacts even to caustic compounds. For cleaning metal plates it is not recommended to use brushes, wire wools and pastes often. These funds should be left for desperate situations.
• With a surface of glass, ceramics, enamel. Only foam or foam rubber sponge, tissue cloth is suitable as a tool. During aggressive mechanical cleaning of such boards, the formation of scratches and chips can occur, so the rate is placed on the quality of the detergent. To wash this device from sugar, melted to the state of caramel, you can use a gruel made of soda and water. We put it on the surface of the plate, wait a few minutes and wash it with sponge and clean water. Eliminate the divorce from burnt milk will help ammonia, but it must first be diluted in 10 parts of water.

Tip: Despite all the safety measures taken by the manufacturers of modern household appliances, before the cleaning, even superficial, the electric stove must be disconnected from the mains.

How to properly clean the grips and handles?

Handles, switches and other small items are easiest to clean if removed beforehand. Soak the parts in a soapy solution, rinse with a sponge or toothbrush, removing dirt from hard-to-reach places. If necessary, use soft natural abrasives, for example, soda. At the end, we rinse and dry all items.

If time does not allow to conduct such a labor-intensive event, at home, you can do and surface treatment. To do this, we take a proven tool for years - anise drops with ammonia. If you approach the problem correctly, it will be possible without any problems to wash off fresh and old dirt from all small details. Wet the cotton disk in the composition, distribute the product on the work surface, wait five minutes and wipe everything clean with a damp cloth.

If there is a grill plate on the model, care must be taken also for its processing. In the case of a cast-iron product, we proceed according to the following plan:

1. We heat the material over the fire so that the remains of dry mud themselves disappear from it.
2. We apply caustic on the surface of the product, leave it for the whole night.
3. After that, we process the element with the composition for cleaning the engines, wash off its residues and dry it.

When working with a steel product at home, it is necessary to proceed as follows:

1. Grate soaked in warm water with the addition of soda and vinegar for several hours, it is possible at night. In the morning, you need to wash the dirt, rinse the product with water, do not dry it.
2. On a still damp object, apply a thin layer of mustard powder, leave for half an hour. Then we wash everything off and dry it.
3. If you can not completely remove the dirt, then spread the soda paste and wash it in clean water after 40 minutes.

Applying these recommendations, you can not worry about the safety of the texture of the material and the appearance of the plate. But it must be remembered that the earlier the treatment is carried out, the greater the chance of its positive outcome.

Specificity of cleaning the electric oven

The processing of the oven of electric cookers can be carried out according to one of the following scenarios:

• We prepare the solution from the household soap, pour it into a baking sheet and put it in the oven. By this same composition, we rub all the inner surfaces of the chamber. Close the door and warm up the cabinet for half an hour at a temperature of no higher than 100 ° C.Then open the door and wait until the metal cools down. After this, it is possible to easily clean the surfaces from dirt with a simple moist sponge.
• The effect of loosening the dough differs greatly in the fight against fat. Spread the powder on the problem surface and sprinkle with water. In a few minutes, all the fat will gather in lumps and they can be easily removed.

It is often recommended to use salt to clean the plates and their ovens. This approach is very ambiguous. He is capable, both to give a positive result, and irretrievably to spoil a covering.