Contents:
- Secrets of successful cleaning: what you need to know about alkali in the household?
- Bath cleaning: pollution degree
- Bleaching surface: vinegar and alkali with a strong coating
- The need to clean the bath
Few modern housewives know that you can clean the bath with soda and vinegar to perfect cleanliness by spending only a few minutes. Unpleasant yellow stains are familiar to everyone, no matter how well and thoroughly the surface is cleaned. It is much easier to get rid of this problem than it may seem. Today, using ordinary soda and table vinegar from an unpleasant plaque, you can get rid of in minutes.
Secrets of successful cleaning: what you need to know about alkali in the household?
Bath cleaning is an activity that does not bring joy, because it is associated with sharply smelling substances, but today soda came to the aid of the hostess. This element is of two kinds:
- food;
- is calcined.
Food soda in cooking is quenched by excessive acidity or used as a baking powder for dough. Calcined soda is an alkali much more concentrated. That is why it will easily clean the surface of fat, it will not resist its strength and the plaque formed in the bathroom.
Calcined it is easy to wash any surface, whether it is a sink, bathtub or toilet bowl, it is sold exclusively in hardware stores, because this type of soda can not be used for food.
Important!
Before proceeding with the cleaning process, it is required to determine the degree of contamination. When using soda ash it is required to wear special gloves, otherwise irritation may appear on the skin of the hands.
Bath cleaning: pollution degree
The bath at home is used often, so it should be cleaned at least once a week to maintain a pleasant appearance. Everyone knows that the more often the cleaning, the easier it will be to get rid of streaks, but sometimes there may be dirt particles in the water pipe, rust - all this remains on the surface. If you only need a little cleaning, then you can use simple baking soda. In order to create the substance used for the work, you need to mix a little soda, vinegar and mix. At home, a soft sponge or a conventional toothbrush can be used as a cleaning tool. The composition should be applied to the impurities and left for a while, about 30 minutes, then clean the surface, rubbing lightly with movements. In conclusion, you will need to rinse the leftovers of the mixture with water. If you do this constantly, the bath will always be clean, and you will not have to use the calcined bath at all.
Whitening surfaces: vinegar and alkali with a strong coating
Cleaning a heavily soiled bath at home is a real test, but with soda and vinegar you can quickly cope with the task. Here it is important to remember that you will have to use soda ash, since it is more powerful.
The recipe for a cleaning agent: soda and calcined in equal parts, bleach and vinegar.
The resulting mixture should be rubbed on the contaminated surface, then left for 20 minutes. During this time, to clean the bath more efficiently and quickly, you will need to make a "wash" of bleach and vinegar, intermixed in equal parts. With this liquid, pour the composition applied earlier and leave for another 30 minutes. Use a soft sponge to clean the surface, after which it is good to wash off the remnants of the product using warm water. Washing the composition is simple, so in the bathroom there will be no trace of soda and vinegar.
Cleaning of the van is also carried out with the help of a soap containing alkaline soap.
Important!
You can only use soda ash for an iron or cast iron bath without a plastic insert.
The cast iron bath can be cleaned with the following composition:
- ground commercial soap without additives;
- calcined soda;
- ammonia.
Soap and alkali - in a ratio of 1: 1, ammonia - 3-5 drops. The mixture is diluted with a small amount of warm water and applied to the surface. After 120 minutes it can be washed off.
The need to clean the bath
Cleaning the surfaces of plumbing equipment with a variety of means is a necessary part of maintaining hygiene. To achieve the ideal will help ordinary soda, as it can easily clean the surface of harmful microorganisms. Formed from time to time, the raid can be easily eliminated if it is not allowed to increase it. If you carry out prevention, you do not have to buy not only expensive products, but also water filters.
Hard and expensive means will remain in the past if you use available means - soda and vinegar. Thus, sometimes it is necessary to check stocks in a locker in the kitchen or purchase soda ash in a store to quickly clean not only the bathtub, but also the sinks. In addition, timely cleaning of soda saves time, money and strength, and also does not cause burns if it gets on the skin or allergies, but gloves are still recommended.
It is important to remember that the bath whitening methods presented should only be applied to iron or cast iron structures, since modern plastic inserts are sensitive to aggressive substances. Soda, vinegar and other similar ingredients will quickly damage the insert, and some baths will become completely unusable. The effectiveness of soda and vinegar is proven, as similar mixtures are used by more than one generation of housewives. Now you can also maintain the ideal whiteness of all surfaces in the bathroom without using harmful chemical compounds.
