How to wash the shower from the plaque and soap divorce?

Contents:

  • How often should I wash the shower?
  • Caring for the walls
  • How to clean the pallet?
  • Features of washing tiles, parts from steel and aluminum
  • Than to wash a shower cabin?

A landlady who follows the cleanliness of her home needs to know how to wash the shower. If, of course, this particular device is installed. And in modern apartments they are increasingly found. Especially with a small-sized bathroom, where you can save a little space. But if the car is not cleaned in time, then it will quickly lose its neat appearance, the glasses become cloudy, and there will be a divorce.

How often should I wash the shower?

Care must be regular. Depending on the degree of contamination, three types of purification can be distinguished.

  • Daily cleansing .It takes place after each shower. To do it simply - just rinse all the surfaces inside the cabin hot, then with cold water and wipe dry. This will wash away the remnants of the soap solution.
  • Regular care .It should be done every week. Perhaps, less often - depending on how many people live in the house and how often they use the shower. To clean the surface, use detergents. Spray the spray or use gels and creams. So you can remove traces of calcareous plaque. If it is completely fresh, it is immediately washed off. If already old, then you must leave for half an hour, then rinse. It is important not to forget to wipe the cabin to dry condition.
  • Intensive cleaning of .In cases where care was inadequate or because of the constant humidity, rust and mold appeared, it is necessary to use strong substances. To wash the shower, the product is applied to the problem area and left for the time specified in the instructions.

The main difficulty lies in the fact that different materials are used in the cabin design, each has to be taken into account. Thus, the walls and doors are usually made of plastic or glass. The pallet can be acrylic, ceramic, even stone. The mixer and shower head are made from chrome-plated steel, the guides are made of aluminum. Often, the cabin is made in the form of a corner, so that they adjoin the walls with a suitable covering.

But whatever the material, you can not use substances with abrasive particles, even cleaning powders. Metal sponges and brushes are capable of leaving microscopic scratches on the surface. At first they can be almost invisible, but the situation will worsen with time, a neat appearance will be lost.

Caring for the walls

If the walls of the cabin are made of glass, then care for them is simple. Wash the shower with a spray for glass surfaces. Since the door can often be cleaned only when closed, the product should be applied to the sponge and washed by the surface. This will not inhale harmful substances with poor ventilation. Minor contamination can easily be washed off with water. But it is even more convenient to use a rubber scraper, it is easy to clean any plaque with it.

Plastic parts( for example, polystyrene) of a sanitary unit are cleaned in the same way. But this should be done even more carefully, as the material is porous and gradually absorbs dirt, which makes it darker.

How do I clean the pallet?

Pallet care depends on its characteristics. Enameled is easiest to clean from plaque. Pollution does not penetrate into the smooth top layer, so any gel or spray for such surfaces can easily cope with them. But you do not need to start the state of the pallet: fresh divorces are removed without much effort, and over the old ones you have to work hard.

Board

If you install a special filter on the shower, then less plaque will form.

If there was a question, than to wash out a shower cabin with the pallet from acryle, it is necessary to remember about properties of this material. It is easy and convenient to install, for which it is appreciated. But this requires careful handling. An aggressive chemical will lead to erosion, and it can easily be scratched. Use for cleaning is necessary means designed specifically for this material. Soft substances in its composition gently wash the delicate surface without damaging its integrity.

Features of washing tiles, steel and aluminum parts

Clean the tiles in this plumbing fixture by any means for the bathroom. Particular attention should be paid to the seams between the individual tiles: it is in them that accumulate harmful microorganisms. If care is substandard, then fungus and mold may appear. So it is important to carefully clean everything to maintain the appearance and comfortable conditions in the cabin.

Chromed steel must be wiped gently so that the removal of the plaque does not lead to scratches. With painted aluminum, which is found on separate parts, it is also necessary to handle carefully. Otherwise, the paint may wear off.

Than to wash a shower cabin?

It is not necessary to look for special means to wash the shower. The main thing is not to choose those that contain abrasive particles. There should be no formic acid, formaldehyde, acetone and other solvents in their composition. Also it is necessary to consider, what materials are used in this plumbing device. For tiles and enameled pallet, a universal tool is suitable, for glasses it is better to choose a spray for windows. Acrylic can be washed even with soap applied to a soft sponge, but it is better to find a polish with wax to create a water repellent effect.


Special substances can also be used to remove problem spots.

  • If dirt appears on the surface that is difficult to wash off, apply a polished silver cloth or toothpaste to the soft cloth and clean the desired area. If you can not immediately get the result, then the remedy should be left for 10 minutes. Then rinse thoroughly.
  • Deposits of water stone, calcareous plaque will help to remove folk recipes. The tray must be filled with water and dissolved in it a small amount of lemon juice or vinegar. Leave for several hours, then wash all.
  • In cases where acrylic has lost its appearance, you can try to restore it with the help of special kits.

Care for the shower enclosures must necessarily include airing. The rest of the time, the doors should remain slightly ajar. This will allow moisture to evaporate faster, thereby reducing the risk of mold. And to withdraw it later is quite difficult.

Knowing how to wash the shower enclosure, you can always keep it clean and prevent the formation of a raid. Care at home should be carried out taking into account the properties of different materials. If you make the proper effort, then the device will last a long time, and its appearance will be impeccable.