How to clean a frying pan from carbon deposits and old fat?

If you are tired of looking at a blackened cast-iron frying pan, do not rush to throw it into the trash. In the people there are many tips on how to clean a pan of carbon. Over time, it covers any dishes. Modern materials for making kitchen utensils are less prone to the formation of scale and rust. But practically in every kitchen there are good old cast iron or aluminum frying pans. They are the ones who suffer most from the fire-hardened fat and rust.

There are 2 ways to clean the frying pan:

• mechanical cleaning;
• boiling method.

Mechanical cleaning is not suitable for all utensils. If a frying pan with Teflon coating, it can not be washed with hard jaws and abrasive powders. Aluminum or cast iron dishes can be cleaned without fear of damage to the surface. When deciding how to clear a frying pan from carbon deposits or rust, pay attention to the material from which it is made.

Folk methods or household chemicals?

The most radical way to quickly remove black carbon - the use of household chemicals. Many housewives point out that this is the only way they managed to restore the old Soviet saucepans radiance and purity.

If you decide to deal with the problem with special tools, the following brands will help you:

• "Amway";
• "Zepter";
• "Fairy";
• Antinagar the Hedgehog;
• "Sanita", etc.

The safest in terms of naturalness of the composition are "Amway" and "Zepter".Remember that the dishes with any coating absorbs the detergent. Household chemistry is best used to wash the frying pan from the outside. In order to clean the bottom and walls inside, it is better to use folk methods, they are less dangerous.

Council

Be sure to follow the safety rules when using household chemicals.

Some products are very aggressive and can harm not only the dishes, but also your health.

If you decide to wash the frying pan from the sludge with the help of household chemicals, follow a set of rules.

1. Carry out the procedure in a well ventilated area. Open the window or windows.
2. Protect the skin of hands by putting on high rubber gloves. Chemicals are absorbed into the body through the epidermis.
3. Using an aggressive remedy, wear a respirator to avoid breathing in vapors.

How to save old cast-iron dishes?

No matter how many new saucepans or pots appear in the kitchen, the old cast-iron frying pan will not be lifted. It often stands out among the "congeners" with an ugly appearance. The ideal way to clean up the carbon is boiling in a solution of the following:

• soda;
• glue PVA;
• laundry soap.

Method with glue and soap helps to get rid of a thick layer of scale both inside and outside. Take the largest pan( the frying pan should not stick out of the water).At the bottom of the pot, lay the saucepan, pour water, add 500 g of baking soda, crushed bar of laundry soap and pour 200 ml of PVC glue. Boil it until the layers of baked fat begin to fall off the layers to the bottom of the pan. The room should be well ventilated. After the "bath" you need to wash the frying pan from the residue of the deposit with a stiff brush.

The second effective method is hardening by high temperature. To protect the kitchen from the smell of burnt fat, it is better to conduct the procedure in the open air. Before placing the cast iron frying pan in the fire, remove the plastic handle. If you still decide to perform the operation at home, use the oven. Heat it to 250 degrees, remove all plastic elements from the dishes and place it inside the oven. Be sure to open the windows in the kitchen so that the fumes do not settle on the walls and furniture. After cooling, flush the pan with water and brush with a brush.

If you want to get rid of old fat, take 100 g of table salt and 50 ml of table vinegar. With the resulting gruel, treat the sides and bottom of the saucepan. Most of the fat layer will come down.

How to clean an aluminum frying pan?

Compared with cast iron, aluminum is very soft and soft. During cooking, it quickly becomes covered with a layer of dark carbon, which not only spoils the appearance, but is also dangerous for human health. It is strictly forbidden to clean it with a grinder or a hard brush.

Aluminum frying pan can be cleaned in two ways:

• digestion;
• incandescent.

You can digest aluminum objects in a solution of glue, soda and soap. If you lack some ingredients, getting rid of the ignition on aluminum will help soda. Evaluate the degree of contamination: if a frying pan has been used for several years and a thick layer of burnt fat on it, the only way to clean it is boiling. Mix 300 g of common salt with 10 liters of water. In the solution, place the container so that it is completely covered with water. To boil it is necessary not less than two hours, then it is cleared both outside, and inside.

The second way to save aluminum utensils is the incandescence of sand in it. Pour the sand into the sauté pan so that the walls are covered to the top. Heat it on gas and leave for two hours. After a specified time, you will be surprised, because along with the sand pour out the layers of black carbon. However, sand will help remove the debris only inside.

How do I clean the dishes with ceramic coating?

Ceramic coated ware is the safest and most convenient option for cooking. Some mistresses have long replaced it with all the cast-iron kitchen utensils. Such products are easy to clean, they do not burn food, and they are not dangerous to health( as, for example, Teflon).But with all these advantages, a light ceramic coating often suffers from burnt fat because of the inattentiveness of the landlady or untimely wash dishes.

Advice

Do not use abrasive powders to clean dishes with Teflon or ceramic coating.

Clean the ceramic frying pan from burnt dark spots with alcohol. You do not need to choose a hard brush, just rub the brown spots with an alcohol pad moistened with alcohol, and they disappear before your eyes. If you can not get rid of them immediately, put alcohol wadding on the stain and wait 5 minutes. This method helps to quickly remove dirt of an easy degree.

If you did not follow, turned away for a couple of minutes, and in a frying pan with a ceramic coating burned pancake or sauce, alcohol will not help here. First, pour water on the bottom and put the saucepan on the gas. Let the water boil for 15 minutes. Usually, after boiling the fumes can be easily removed with a soft sponge. If this method does not help, add a bag of citric acid to the water, but do not use soda.

To wash a frying pan from carbon deposits is not so difficult if you know some folk tricks. Before selecting a method, be sure to pay attention to the material from which your favorite cookware is made: if cast iron can be subjected to rigid processing, then Teflon coating and ceramics can be cleaned only by gentle means. Do not rush to throw away old kitchen utensils, you can easily save it at home without spending a penny on it. Instead of old and blackened dishes on the shelves, bristled pots and pans shine.