How to remove double-sided adhesive tape from the machine: a selection of the most effective means

Content:

Similar to

  • Similar to
  • Gentle method with
  • oils Dishwashing liquid or wiper
  • Acetic acid solution
  • Eraser or special nozzle
  • Alcohol or nail polish remover without acetone
  • Solvents
  • Paraffin waxing agent
  • Removal of traces fromscotch from the car with improvised means can cost you not only wasted time, but irretrievably lost nerve cells, unless you previously hold a smallan online survey, of course. You are lucky: this collection contains all the tools that can save you from a problem at home!

    Similar to

    Typically, tape and tape are removed with a bang, and deal is solely with their tracks. But what if the strip of tape was pasted so long ago that it seems that it has already grown to the body? To help remove the traces you can a fresh fresh piece of scotch, which you need to glue on the old, leaving a free end, for which you will pull.

    It would also be nice to heat the old strip a little with a hairdryer, as raising the temperature will make the glue a little more viscous and facilitate the removal process.

    Now it is necessary to pull for a free edge of a fresh strip: the old strip should start to leave together with it.

    Tip

    Pull tape better not at a 90 ° angle, but maximally parallel to the surface at an angle close to 180˚.Thus, the paint and varnish coating will not feel any impact, which is especially important if the car has not been repainted very well or if the paint has cracked a little in the area of ​​the tracks.

    Gentle method using

    if the scotch tape is rather fresh, then it can be wiped off with oil: apply olive or sunflower oil on the adhesive, wait a bit and gently rub the area with a rag or sponge. They say that melamine sponges are the most effective in this matter, but they should be used with caution: some, but an abrasive.

    It is interesting that traces from the body can remove not only ordinary, but also essential oils. You can use tea tree oil, peppermint, eucalyptus or any of the citrus fruits, without being afraid for the safety of the paint.

    Advice

    Any gentle method of removing traces may require soaking or repeated repetition of the procedure.

    Dishwashing detergent or wiper

    Another delicate way to get rid of scotch traces is washing-up liquid for washing dishes and windows. Of course, when using them, you will have to work with your hands, wiping off traces, and, possibly, several visits, but you will not have to worry about how the paint reacts to such an impact.

    Advice

    Before applying any of these methods, it is not superfluous to heat the traces of scotch using a hair dryer, even if they are not very old. So remove the stains can be much easier and faster.

    Acetic acid solution

    Some motorists remove traces of double-sided adhesive tape with a mixture of water and acetic acid in a 1: 1 ratio. Vinegar has the ability to output as many spots of different nature, which, perhaps, will help with the glue track.

    Eraser or special nozzle

    In car dealers often use a special rubber disc to remove traces of scotch, and it is quite possible to buy and use it yourself. But if the surface of the glue stain is not very extensive, you can use the usual eraser! Just not the side that is supposed to wash the pen.

    Advice

    The use of abrasive tools does not help at all remove the glue, as usually the particles simply stick to the spot and form a sticky adhesive mass, which is not removed any easier than conventional glue.

    Alcohol or nail polish remover without acetone

    This option is for those who do not want to wait long, but at the same time is afraid for the safety of the LCP.Yes, alcohol and lacquer-free liquid without acetone are more harmless than other solvents, but they can leave a trace on the surface. Do not be lazy to check how your LCP reacts to such an impact, on a small inconspicuous site.

    advice Here are listed a lot of ways with which you can remove scotch, but no one can tell exactly which will help in your case, since the effectiveness depends on the nature of the adhesive tape adhesive, and they may differ slightly. It is necessary to select the ideal method using the trial and error method.

    Solvents Typically, motorists are slow to use solvents to remove scotch from the body, because unwillingness to see a frosted spot or get a blister in a couple of days is usually stronger than the desire to remove glue stains. And, nevertheless, you can resort to this method if you pre-screen the reaction of LCP on the solvent in an inconspicuous area.

    Use in this case can:

    • "White Spirit";
    • acetone;
    • petrol;
    • diesel oil.

    These remedies really remove double-sided scotch without a trace. The main thing is that their use does not leave a new mark on your car.

    Ignition aid based on paraffin

    This product can become a real wand that helps to remove traces from the car in just a few seconds, but it works only with certain glue bases. We recommend starting with the means of ignition, because they are absolutely harmless for LCP and can erase glue marks instantly with minimal physical effort to clean the glue stains.

    Yes, if you are unlucky and the adhesive base of your scotch will not be removed, then you will have to switch to other methods. But if the glue will be suitable, then the problem will be solved in record time!

    Perhaps, it is not necessary to resort to the help of professionals in order to just remove the traces of scotch from the car, and it is quite possible to do it yourself. We hope that among all the variety of ways you will find one that suits you!