Washing machine Beko 5 kg - malfunction

The washing machine is one of the most important types of equipment in the whole house. Very popular was the production from the brand Beko, which produces models of different types at an attractive price. And very often it happens that our favorite technique breaks down when we do not expect it at all. Of course, no mechanism can be eternal, so today we will figure out the question: if you have a 5 kilogram washing machine, what kind of malfunctions can occur and give some tips on how to fix it.

to the contents ↑

Home Diagnostics

Usually the reasons for breakdowns are very simple, although they cause a certain panic in the user. In this section, we will try to find out the reasons for the failure of the washing machine Beko 5 kg.

How to identify possible damage?

In this section we will help the reader to identify the main reasons for the breakdown of his technique. In order not to resort to the help of a master from a service center who takes a lot of money for diagnosing a machine, let's try to understand on our own whether there is a breakdown in the washing machine, and if so, what is it connected with.

Breakdowns can be as follows:

• The water in the unit either does not heat up or heats up too much, as a consequence - the machine "does not listen" to its owner, things are being erased in the wrong temperature.
• The hatch cover does not close, which means that the washing can not start.
• Washing machine "Beco" gives an error code and flatly refuses to wash things.
• No water is poured into the tank or is poured for a very long time.
• The water does not drain on the hose after the washing procedure, and sounds that are not characteristic of it are heard from the machine.
• The rotation of the drum during the washing of clothes is accompanied by incomprehensible noise, grinding and creaking.
• The machine does not turn on even if it is plugged in.
• I can not run any program, although the machine issues it, but does not.

Attention! If you notice any other strangeness in the work of your styralki and can not determine what is wrong with it, contact the master - he knows his business. The technician will diagnose your styralka and, probably, can repair it directly on the spot.

Two types of faults

Masters specializing in the repair of such equipment, share all the breakdowns into two types:

• External. Usually caused by damage to the case. It can also be characterized by external damage to the control panel( a hole, a deep scratch), a crack on the glass of the hatch, a breakage of its handle.
• Internal. They are connected with the breakdown of internal parts that provide the basic work. Most often, such a problem occurs when any part of loaded clothing gets inside( for example, a small coin or a button from a shirt), or the wear of an element appears, because of which the entire machine crashes.

to the contents ↑

The main causes of damage to the washing machine

So, in the manifestations of the malfunction, we figured out, now we need to determine its cause. What could have caused the breakdown of your favorite equipment? Let's try to explain the most frequent causes of some malfunctions, in order to proceed with the possible repair of the washing machine Beko.

If the temperature in the unit does not match the temperature selected by the user

Most likely, the cause may be a malfunction of the heater( the part that heats the water) and / or the control board. You must check both items without fail.

If the water does not enter the tank or comes in, but very slowly

There are several reasons for this:

• The first one - the filter that is in the hose, is strongly clogged, so water can not pass through it.
• The second is the lack of water in the water supply system.

Damage to the control unit may also be the cause.

If the hatch does not close

Try not to force it on the knee, maybe it just can not close due to weak pressure. However, in the event that the machine issues an error, and the code decrypts that the hatch is not closed, although in fact it is not, the sensor that blocks the device during washing is broken.

If the machine does not drain the used water and the strangely hums

The problem may be a blockage of the hose from which water must flow or in the control board.

If the machine is noisy spinning drum

Such malfunction of the washing machine Beko can be the damage to the bearings or the ingress of a small foreign object inside the device. In this case, you need to immediately turn off the machine, because this malfunction can be dangerous.

If the washer does not turn on at all

Also the device may not turn on at all or disobey the operator. Here, most likely, the control panel buttons are broken or some wire( usually network) is broken.

to the contents ↑

Self-repair of the

device Manufacturers and masters of the service centers do not highly recommend complicated repair of the washing machine, however simple repairs of the washing machine Beko can be carried out by themselves, because this brand is well repairable, as it is not so complicated, unliketheir counterparts.

So, that's what the owners of equipment can do:

• Replacement of electric heater;
• Cleaning the drain hose filter;
• Replacement of the intake valve;
• Replacing the drain pump.

Warning! If it is necessary to repair the most complex nature, we recommend that you immediately contact the master working in the service center, otherwise - the risk of breakage is more secure to you.

The information in this article has helped you determine the malfunction of your washing machine Beko 5 kg, quite simply. We hope you managed to do it yourself.