How to wash off the hood from fat

Hood is a must for every well-equipped kitchen, which is regularly prepared. Therefore, how to wash the hood from the fat is one of the most important questions. From its purity depends largely on the convenience of the cooking process and the quality of the air in the kitchen. To help you solve this task faster and easier, we will tell you a convenient way of doing things.

to the contents ↑

Where to start cleaning the hood?

Before starting to clean the hood, it is recommended to do the following to find which part of the hood to clean first:

1. Disconnect the hood from electricity.
2. Separate the lower cover of the hood from the structure.
3. Remove the metal filters. Pull out the auxiliary pipe( if any).
4. Remove the air filter( if any).

After disassembling the hood, you will see how much it is running, and which parts require more effort.

Important! Never start washing the hood unless you have de-energized it. This threatens with serious consequences - an electric shock or a fatal outcome.

to the contents ↑

Than to wash the extract from fat?

To clean the hood is very simple, if you choose the right tool. In this case, you will need:

• soda;
• laundry soap;
• any dishwashing detergent;
• granular powder for pipe cleaning;
• "Sano Forte Plus";
• "Shining for plates";
• Cleaner for ovens, grills, extracts "Green &Clean;
• Detergent for furnaces and for removing the deposit "Isesclean"
• Cleaner for ovens AmWay.

Also prepare:

• rags;
• sponges;
• brushes.

to the contents ↑

How to wash the filter of the kitchen hood from the fat?

Metal filters are the first barrier in the way of steam, odors and finely dispersed droplets of fat, so cells quickly become clogged with fat. After that, the hood starts to work poorly, down to a complete inability to suck in air. To restore its full functionality, use one of the following methods.

Method 1

If the droplets of fat light color, this means that they have not had time to form a protective film and will be relatively easy to clean.

To do this:

1. Soak the filter in a container with hot water.
2. Treat with detergent from grease.
3. Leave to stand for 30-40 minutes.
4. Clean the filter with a metal or a very stiff plastic brush.
5. Rinse the remaining fat with warm water.
6. Rinse well with cool water.

Method 2

In case when these actions did not bring the desired result, proceed to more decisive methods of combating the fat coating:

1. Take the pan with water in which the filter is placed, at least to half( the second half can be processed after the first one).
2. Pour into it half a finely grated or chopped laundry soap and 2 tablespoons of baking soda.
3. Insert the filter.
4. Boil the mixture with the extractor part for 5-10 minutes.
5. Pull the filter out of the pan.
6. Wash with running water.

Important! If after the procedure you notice the presence of fat on the filter, leave it in the hot mixture for 2-3 hours or repeat the procedure. Typically, this technique is suitable for almost all filters and dissolves fat well both outside and inside the filter.

Method 3

If the previous method of cleaning the filter has not helped, or partially removed the grease, and you are still wondering how to clean the grill hood from fat, the next option is for you. Act according to the following scheme:

1. Take a liquid or granular cleaner to clean the pipes from blockages.
2. Read the instructions carefully.
3. Take a stainless container or use a sink.
4. Wear protective gloves on your hands. Fill / fill the filter media.
5. Gently pour the water over.
6. Leave for 5-7 minutes.
7. Rinse with plenty of running water.

Important! A powerful chemical reaction of water and alkali will remove even the oldest fat in the filter cells, but remember that this remedy can only be handled in extreme measures, with the most neglected variants. Since the active components of the means from the jams corrode the aluminum grating of the filter, it can irreparably damage it.

to the contents ↑

How to clean the hood from fat?

Cleaning the surface of the hood is a problem that is becoming more difficult to solve with the passage of time. Since the more dirty the surface, the more difficult it is to wash it without damaging the surface. To deal with grease on the outside and inside of the hood, proceed as follows:

1. Sponge the dishwashing detergent or a specialized anti-fat remover to the surface.
2. Treat it well with friction.
3. Leave to soak for 10-15 minutes.
4. With a sponge or a soft metal brush, remove the exfoliated oil.
5. Rinse the remaining fat with a soap solution.
6. Wipe several times with a wet cloth and then with a dry cloth to remove the remnants of the cleaner to clean the hood from the grease.
7. In the same way, clean the inner tube.
8. Before installing the clean pipe in place, dry it.

Important! !Never use rough abrasives or metal brushes to clean the outside of the hood, as they can damage the hood surface and degrade the appearance.

to the contents ↑

Useful advices

• Do not install the hood yourself - entrust this work to professionals. This will not only ensure its high-quality functioning, but also its security.
• Do not leave gas on the stove if you do not cook. Hot air can melt or cause deformation of the cells on the hood and its throughput will be significantly reduced.
• Do not forget to unplug the equipment before cleaning the hood.
• Clean regularly at least once every 2 months.

Now the problem of dirty hoods with adhering layers of fat will not bother you anymore if you stick to our advice. Excellent results and comfortable conditions for cooking you are provided!