Repair of multivarches

At the moment, the world is ruled by a trend such as a healthy diet and a healthy lifestyle. A multivariate is one of the devices that helps to prepare the right, in terms of dietology, food. But what if your assistant broke down, how to repair the multivariate? In this article, we will try to tell you about how to repair, why break multivarks and how to avoid it.

to the contents ↑

How do you operate the home multivariate

First of all, you should know that the programs of the home multivark are the secret of the corporation. But in spite of this, one thing is known: according to the work of one of the sensors, the multivariver understands what needs to be done further. The device is based just on it.

Inside the memory chips, the temperature, as well as the duration of individual segments, recipes, are laid down precisely on these data and the heating element and is controlled.

So, we noted that there are 2 sensors in the multivark. For what they answer

The first sensor

The most important button on the reverse side is a thermistor. Remove it can not be so easy, because the manufacturer did not think at all that someone will do it, in addition to warranty services.

Important! In the multi-brand "Redmond" you will have one more surprise: absolutely all removable terminals will be filled with a compound, which is why dismantling is impossible. Accordingly - repair of multivarieties of this brand is also not always possible.

The second sensor

Inside the cover itself, another sensor hides. It is also extremely difficult to get to, which is why it is only necessary to get to it if you have complete certainty that the fault lies exactly there.

How to gain this confidence?- undock, not paying attention to the compound, the required connector, then turn on the home multivark. Everything is as it was? There is a high probability that you found the problem.

Important! For greater confidence, measure the resistance between all sensor wires, warm the cover.

For example, the "Redmond" wiring is in the loop area under the most removable cover. After unscrewing the screw, you can dismantle the shield, get the wiring out, and then cook in the multivarker, while not forgetting that you need to measure the resistance. In case you did everything right, you do not have to look for any third-party tools for repairing the multivark.

to the contents ↑

The most important thing is the correct operation of the

. In order for the multivarker not to go out of service for a long time, you did not have any desire to repair it, you should carefully monitor its proper operation.

First and foremost, it is a question of correctly stacking products - they must be put in the bowl, and afterwards - put the bowl inside the multivarkers, and under no circumstances is the other way around!

The reverse sequence is fraught with the following troubles:

• If in addition to solid products you have to pour some liquid, then it is very likely that it will simply spill inadvertently, and then get inside the mechanism.
• The next danger is even more serious - it is quite possible that there will come a time when you simply forget that the bowl was washed and is on the table, and you will habitually start pouring liquid into the "open womb" of kitchen appliances, completely destroying the microcircuits in milk orwater.

to the contents ↑

What can cause a need for repair?

Most often, the causes of damage are specifically contaminated contacts. This leads to the liquid trapped inside the machine or the loose products:

• salt;
• sugar;
• groats.

If this is the case, then it is quite easy to repair the multivarque with your own hands.

Important! The main thing is that you must adhere to a certain rule: do not turn on the device until the cleaning process is completed and the entire structure is assembled again.

to the contents ↑

To send in service or repair in person?

Naturally, the way to repair a multivarker with your own hands can only be used if you:

• are fully confident that the problem of the operation of the technology lies precisely in the contaminated contacts;
• personally saw how foreign objects got inside the device.

In other cases, it is better not to clean the multivark yourself.

Important! If the warranty period has not yet expired, do not take a screwdriver - better take the multivark to the service center, and let the experienced masters will restore its viability.

to the contents ↑

How do I clean the multivark?

Once you have decided that you can repair your multivarks yourself, carefully study the following list of actions and strictly observe it:

1. First remove the items that are in your mind and do not hold anything except the screws. And to be more precise, it's a metal or plastic cover.
2. Once you remove the cover, you will see the chips in front of you.
3. In order to get rid of loose products, simply turn the kitchen unit over and gently shake it.
4. Remove the screws on the bottom cover. As a rule, there are 3.

In addition, you will need to perform the following actions:

1. Disconnect the cable that connects the software board together with the lower card of the multivarker.
2. Remove the heating element, which is secured with a mounting plate and three screws.
3. In the center of the internal device there is an internal thermometer, which allows the mechanism to control the temperature when cooking. Remove it should be extremely cautious, because the device is fragile enough.

Important! So detailed disassembly of the multivarka during its repair will help you to remove from the device absolutely all the remains of sugar, salt or cereals inside.

to the contents ↑

What is a thermal fuse?

When it comes to such repairs of the multivark, there is due to the small size of a cylindrical piece of wire that strongly resembles its appearance as a resistor. The principle of its operation:

• When the temperature reaches 170 C, this fuse is triggered.
• The maximum current that can pass is 10 or 15 A, it all depends on the type of element.

Important! If at least one of the above parameters goes out of the allowable range, the thermal fuse burns, thereby permanently breaking the electrical circuit from which it is fed.

Why not make such a fuse yourself?

• Firstly - this small element is rather modest.
• Secondly - thermal fuse is not in vain selected for each model separately.

Important! An instance that you make yourself can have completely different characteristics, which will not lead to anything acceptable.

Where to find and how to replace the thermal fuse?

Thermal fuse lives inside, in the heart( heart) of the multivark. As a rule, there are several of them there, and all are covered with cambriches, dressed in wires of different colors. Accordingly - to detect a burnt out fuse, you will have to unscrew the bottom of your multivark.

Important! The mentioned cambrics are usually in sight, you do not even have to look for anything. Sometimes they are also covered by a yoke, which is screwed with a screw, but usually they hang in the air.

Cambric is a piece of wired plastic insulation, usually white, which serves to protect the junctions of various components.

If you take out a saucepan, you can find a button below it. At least, this node looks like a button. Usually it is such a large enough size steel mushroom head, the leg of which is girdled not by a tight spring.

The surface that is around is the same heating element. So, during the repair, when the multivarker is disassembled, thermal fuses are placed near this main button.

Important! Thermal fuse is fixed by crimping and under no circumstances by soldering. A hot sting will easily burn an extremely sensitive element to heat. At this stage, the repair of the multivark will have to be suspended, and start searching for a new thermal fuse.

We have reviewed the instructions for the possible repair of the multivark. We hope you have enough experience in disassembling various household appliances, so there were no problems. If you do not have one, take your "assistant" to the service center of the company that launched the model of the multivark you are using. Its experts know exactly about all the nuances of the internal device and will be able, if it is possible in principle, to repair the device.