How to clean the washing machine of smell and dirt?

Today it is very difficult to imagine our life without a washing machine, it saves a lot of time and waste of our forces. However, the technique requires constant care and it is necessary to know how to clean the washing machine of odor and dirt. Otherwise - it just might be out of order. How to clean properly, so as not to damage any parts of the stylalki? This is described in detail in our article.

to the contents ↑

How to clean the washing machine from dirt inside?

There are several proven ways that you can easily clean your washing machine at home. For this, you can use not only special household chemicals, but also many products and household substances.

You can use such simple tools as:

• soda;
• citric acid;
• vinegar;
• chlorine bleach.

No doubt, at least one product from this list is necessarily available in your home. Consider how to properly use these tools for cleaning washing equipment.

to the contents ↑

How to clean the washing machine from dirt inside the machine with soda?

The inner walls of the stylus will help to clean ordinary baking soda. With its help, you can cope with the appearance on various parts of the technique of mold fungi.

Important! Soda treatment is best done at least once every 7 days. This frequency will save the technique from an unpleasant fungal lesion, prevent its appearance and spread.

Cleaning procedure:

• Dissolve soda in water at room temperature, taking soda and water in equal proportions.

Important! To avoid scratching the plastic or damage to other parts of the machine, make sure that the soda is completely dissolved in water before use.

• Use a sponge to apply the mixture on the surface of the parts that are inside the machine.
• Rub the surfaces, then rinse with clean water.

Important! Rubbing should not only metal parts of equipment, but also rubber parts.

• Dry all rinsed elements.

to the contents ↑

How to clean the washing machine from dirt inside the machine with vinegar?

Acetic acid is available without exception for every hostess. Most often it is used for making delicious dishes. However, this liquid successfully copes with the tasks of bringing the house and equipment clean. You can clean the inner surfaces of the washer as follows:

• Pour about two glasses of acetic acid into the washing machine.
• Plug the appliance into the outlet, set the wash mode and start the cycle.

Important! The water temperature should be the highest, so that the cleaning effect is maximized.

• Leave the machine in the selected mode for about five minutes. After that, turn on the "pause", let the device stand in this state for 60 minutes.

Important! During this time, acetic acid will dissolve most of the pollution, while it will not bring any damage to the details themselves.

• After the time for soaking, finish washing.

Important! The cycle with acetic acid should be carried out without additional detergents and without laundry, idle, otherwise - a concentrated liquid can lead to damage to the structure of the tissues.

• Remove the remaining acid in the machine by performing another wash cycle.
• Rinse all parts with clean water and wipe them dry.

Important! Clean the washing machine from dirt under the rubber can be a solution consisting of equal parts of water and vinegar. After this treatment, the parts must be wiped dry.

to the contents ↑

How to clean the washing machine of odor and dirt with citric acid?

Citric acid is able to easily remove mold parts from the parts of the washing device, dirt, limescale and an unpleasant odor. As a result of the effect of citric acid on the structure of contamination, its destruction and detachment from the surfaces of the elements of the styrene occurs.

Cleaning procedure:

• The internal parts of the washing machine can be cleaned with two hundred grams of citric acid.
• Add the powder of lemon juice to the powder container.
• Activate the "long wash" mode with the highest possible temperature.

Important! To achieve the effect, water should be a temperature of at least 60 degrees. The entire cycle is carried out entirely idle, without laundry and additional detergents.

• After the end of the washing cycle, turn on the intensive rinse so that any acid residues can escape from the parts.

Important! Cleaning of the internal parts of the washing machine in this way should not be carried out more than once every three months. More frequent use of acidic powder will damage the rubber components of the unit.

to the contents ↑

How do I clean the washing machine of dirt inside at home with a chlorine-containing product?

From lime and fungus, the internal parts of the household appliance will help to clean the chlorine bleach. Ideally in this case, the usual "Whiteness" will do.

Important! The frequency of such cleaning should not exceed three times a month.

Cleaning procedure:

1. Measure with a measuring cup a full glass of bleach and pour it into the drum of the automatic machine.
2. Set a long wash mode with a water temperature of at least 60 degrees.
3. After the end of the cycle, rinse everything with clean water and wipe dry all the washed parts.

Important! The only significant drawback of this method will be the presence of a sharp unpleasant odor of bleach during the procedure. In this case, it is recommended to open the bathroom door and the window of the adjoining room for effective ventilation.

to the contents ↑

How can I clean the washing machine from dirt inside the machine and smell? Special tools

In the market of household chemicals, you can buy a special tool for cleaning the washing machine, the automatic machine for odor and dirt. The instructions on the package describe in detail how to use them. The use of industrial chemistry gives results no worse than the use of the products described above.

The most famous and popular are the following tools:

• "Calgon".Excellent cope with lime.
• "Antinakipin".The component components of the agent effectively remove limescale on the walls and details of the stylalk.

Important! Use industrial products should be strictly according to the instructions. To start the machine-machine for cleaning should be idle.

to the contents ↑

How to wash the washing machine from the inside?

Many housewives are interested in the question, how and what wash the washing machine inside? Of course, household appliances for washing should be cleaned not only from the outside and visible parts of the drum, but also other internal elements.

Cleaning the

filter It is the contamination of the machine filter that can cause unpleasant odor, poor circulation of the liquid inside the washing device and even the flood. Therefore, proceed as follows:

• To avoid unpleasant consequences of the clogged filter, you must periodically open the bottom panel in the device, drain the stale dirty water and pull out the filter for cleaning.

Important! Be sure to close the water access to the washing unit before doing this.

• The part must be cleaned from the outside and inside.
• All debris from the filter element is removed, and the clean part is returned and fixed to its place.

Cleaning the container

In addition to the filter, you should also clean the compartment where the detergent and the conditioner for the laundry fall asleep. Clean the container for the detergent powder with a liquid "Comet. Double effect ":

• You just need to fill them with the extracted plastic part in a small container and leave it for a few hours.
• After this, rinse the container with clean water.

Important! The container should be cleaned regularly after 5-7 washings.

Door glass cleaning:

• You can remove a wide variety of dirt from the glass surface on the door with an acetic solution of 50% concentration. You can prepare it yourself, mixing vinegar and water in equal quantities.
• After wiping the glass with a solution, it is recommended to wipe the glass with a damp clean rag and dry it.

to the contents ↑

Preventing the appearance of scale on the parts of the washing machine

Nevertheless, the main problem with washing technology is the appearance of scale on heating elements. Such a new formation threatens to break down the machinery. The reason for this phenomenon in most cases is too hard water, which has a large number of salts in its composition. They are deposited on the TEN during the washing process.

It is much easier to prevent the appearance of scale, than to deal with it. Therefore, we offer to your attention a few tips that will help solve this problem:

• If you know that the water you have is rather stiff, you should add a water softener to each washing unit for each wash. It can be ordinary citric acid, soda or special purpose "Calgon".
• In order to prevent the appearance of limescale on the heating element of the washing machine, a small amount of soda ash should be periodically added to the water. Its components, combining with salt molecules in water, prevent the formation of scale on TEN.
• For washing it is recommended to use more often modes with medium and low water temperatures - this prevents the formation of scale on the heating element.

Important! Washing on high-temperature mode - on the contrary, stimulates the process of settling of salts on the walls of the TEN.

• If the clothing is dirty enough and does not wash out at low temperatures, it is recommended to pre-wash the laundry manually. Although this is laborious, it will definitely extend the life of your equipment for washing.
• Try to wash the old clothes of old clothes less, because when washing such clothes, a lot of small particles are formed, which contribute to the formation of lime on the elements of the machine. Such things are best washed by hand or in devices of activator type.

It is very important to know how to clean a washing machine at home. On this depends very much: both the duration of the service of the household appliance, and the cleanliness of clothes, and the absence of an unpleasant smell both on the laundry and on the technique itself. Using the recommendations from the article on cleaning all parts of the unit, you will do all the work quickly and easily. And useful tips will help prevent the formation of scale on the heating element and save you from additional waste and unnecessary problems.