How to wash multivark?

To help a modern woman in solving the economic problems came a new technique - a multivarker. Since this thing in the house is new, then how to wash the multivark is not yet studied, so that we will expand knowledge in this area.

to the contents ↑

What does a multivarker consist of?

Each part of the multivark needs an individual approach, both in terms of application and in terms of service. Each model has:

• cover;
• bowl;
• water trap;
• steam valve;
• heating plate.

Important! Some parts are removable, others are not. Something needs to be washed after each cooking, and other parts are not cleaned often. The main thing is to know how to properly wash the multivark inside and outside and dry all parts after treatment with water and water.

to the contents ↑

How to wash the bowl?

The entire process of cooking a miracle device takes place in a special bowl. This container is usually made of aluminum or stainless steel. It differs from conventional pots - the presence of a persistent non-stick layer.

Coatings that prevent food sticks in miracle equipment can be:

• Teflon;
• ceramic.

Conclusion: wash the bowl without using scratching( abrasive) funds. Capacity is best handled manually, not in a dishwasher. Therefore, the first thing we will understand is how to clean the bowl of the multivark. The method will depend on the type of non-stick material.

Teflon

This coating requires a more "soft" cleaner, since scratches are not tolerable on Teflon. The rules of care are simple and it will be possible to fulfill them exactly. The main thing - remember some mandatory conditions and sequence of actions.

How to wash the bowl of the multivark - Instruction:

1. Wait until it cools before washing the multivark. For the bowl to cool faster, it can be removed from the hull.
2. Wash the container like ordinary dishes.
3. In the process of washing, add a few drops of lemon juice to the water - this will remove the unpleasant odor.
4. Clean the clean bowl, especially the outer part, since it contacts the heating element.

Important! Some manufacturers of the device advise, after cooking, to boil half a lemon in a container for 10-15 minutes, turning it on "Steam", and then proceeding to wash the multivarkers.

Ceramic coating

This coating is afraid of chips, so you need to get the cup carefully, do not drop it and do not knock it. The rules for the care of such material are as follows:

1. Wash handmade with tools that do not contain corrosive acids and alkalis.
2. A corrugated ceramic bottom should be slightly rubbed, but not with a rigid sponge.
3. If the contamination is strong enough, then soak the surface with a gel that will dissolve the fat well.

Important! Ceramic spraying can not be cleaned with soda. You do not need to save money on washing the bowl, as this part of the multivarket spoils much faster than all other elements, and buying a new one will cost much more than buying a gel.

to the contents ↑

How do I clean the case and cover?

Another element that requires attention in solving the problem of how to wash a multivark is the body of equipment itself. The difficulty lies in the fact that since a multivark is an electrical appliance, it can not be immersed in water.

For normal, proper operation, the enclosure must always remain clean. This can be achieved as follows:

1. Remove water droplets and grease that accidentally fell on the plastic surface with a soft, damp cloth.
2. Wipe the cabinet dry.
3. Also clean the inner surface of the lid with a sponge or microfibre cloth.
4. When using cleaning agents, give preference to gels.

to the contents ↑

What else can I clean in a multivariate?

Some more details require personal care. Therefore, you need to know how to clean the multivark to ensure the perfect cleanliness of the appliance and delicious aroma of dishes.

Steam Valve To clean the steam valve:

1. Disassemble it.
2. Apply a special gel to the sponge and clean the element.
3. Rinse the valve in clean water and dry it well.

Important! The design of the valve still includes a retainer and a rubber band. They can be easily obtained, but do not stretch them so that they do not deform. In the same way, you can wash the internal disk removed from the cover.

Condensate tank

Some models of the multivark have a container that collects condensate. After cooking, this element must be reached, poured water from it and washed.

Non-detachable cover

If you find that your model has a non-removable cover before cleaning the multivarker, then use the steam mode to clean it:

1. Pour 1 tbsp on the bottom of the bowl.water.
2. Add a slice of lemon or squeeze out the juice.
3. Turn on the machine for 15 minutes in steam cooking mode.
4. The case of the multivarker is wrapped in a dense cellophane so that the lid remains outside.
5. Tilt the machine forward.
6. Wipe the lid with a soft washcloth or sponge with a dish gel.
7. Rinse the foam.

Important! The moisture should not appear inside the cellophane wrapper, so as not to wet the opening assembly and the body.

Heating element

Separately wash the internal heating element. Under the flow of water it can not be substituted. Just wipe it with a sponge and dry it.

If the food was attached to the heating element, apply a brush with a stiff bristle to clean it. All parts of the multivark are collected together only when they are completely dry.

Important! Along with the basic elements of the device, wash and accessories:

• spatula;
• spoons;
• containers for steaming;
• grill fryer.

Remember that the proper maintenance of the multifunctional device guarantees its operation for many years. Use our advice on how to wash the multivark, and you will provide a useful diet for a long time without any hassle.