The dish does not turn in the microwave - what should I do?

Those who started using the microwave oven, over time, no longer imagine daily life without this technique. In a few seconds it will help defrost meat, fish, preheat the prepared dish and even for a couple of minutes will make a culinary masterpiece for dinner without much trouble. But as with any electrical appliance, over time, there may be malfunctions or incorrect work in the microwave. If there is not a plate in the microwave, what to do is not everyone knows. And this is a fundamentally important point in the operation of the microwave device.

to the contents ↑

Why spin?

The very first models of microwave ovens did not have the function of rotation of the pallet, so to achieve a good heating result, you had to manage by hand and spend extra time on it. That is, it was necessary to turn on the device at least 2 times, with repetition, turning the plate with food the other side.

Somewhat later this point was improved by the manufacturers and brought to automatic mode. To do this, now each microwave oven is equipped with a special plate on the wheels. Due to the circular motion of the pallet, the products delivered inside the food are heated uniformly for 1 cycle.

There are 2 ways to do this if the dish does not turn in the microwave:

• leave everything as is and manually turn the plates with food as needed;
• to find the reasons why the dish does not turn in the microwave and fix them to restore such a convenient automatic work of household appliances.

to the contents ↑

Common causes of

Before contacting a service center or a private repairman, inspect your equipment. It is likely that the reasons why the dish does not rotate in the microwave oven will be very simple and do not need technical intervention.

So, what to look for in order to restore the correct operation of the microwave:

1. The inside of the plate has a too large diameter, because of what the walls block the possibility of turning it.
2. A piece of food fell from the plate and blocks the movement of the pan or container with the products on it, perhaps the small crumbs are hammered between the wheels and hinders its rotation. Either, for example, you put a too large piece of meat for defrosting, which when cornering rests against the walls and prevents the movement of the pallet.
3. After cleaning, the pallet was installed incorrectly - the grooves did not enter the return ridges on the bushing or the bushing itself did not go right. To fix the situation, it is enough just to fix the details.

to the contents ↑

Technical reasons

But if you did not find all the previous reasons, and the dish does not rotate in the microwave - what should I do?- Do a thorough repair or call a master.

The reasons for this phenomenon can be as follows.

Gear failure

Gear gear may fail and cause a lack of rotation of the pallet. To restore the functionality of the microwave, replace the gear. If this does not help, you will have to completely change the engine, but this procedure is usually expensive, so sometimes it is more expedient to return the old device for recycling and purchase a new one.

Coupling

Another reason why the dish does not rotate in the microwave is the slippage of the clutch on the motor shaft. That it does not happen, you can try to strengthen it. If such actions did not help - the coupling changes to a new one.

Breakage of motor winding

In this case it is necessary to call the master, as it is impossible to restore the integrity of the motor winding - it only needs to be changed. But if you decide to go more thoroughly and replace the entire engine - it is quite possible with some skills in working with electrical appliances.

To determine this failure, you can even without dismantling the equipment - due to the presence of the smell of burnt lacquer.

Open circuit

If the winding is not broken, but the contacts in the supply circuit are simply broken. To detect this malfunction, you need to call the wiring by the tester. When you find a cliff, restore its integrity.

From this article you learned all the possible reasons why the dish does not turn in a microwave and what can be done about it. We hope you did not find any complicated problems, and the phenomenon was covered only in the banal reasons for improper operation of the device. Henceforth, try to treat your valuable equipment more carefully, so as not to waste time searching for possible breakdowns.