No water enters the dishwasher

In modern world there is an incredible amount of a variety of equipment, there are even more reasons for their problems, and there are as many ways to eliminate them. The dishwasher was no exception. One of the most common failures is that water does not enter the dishwasher. About ways of the decision of the given problem, for what reasons it arises, speech in given article will go speech.

to the contents ↑

What should I check at once? Is there water in the tap? Extremely trite, but many people are simply inattentive. If there is no water in the tap, then there will be no source at the dishwasher, because there is one riser. If there are problems with water supply, the problem is most likely to be the water supply, and not the dishwasher.

Check if the water supply valve is turned. In the place where the hose is connected together with the water supply system, there should almost always be a special valve. When it is closed, the water, by itself, will not pass. It is necessary in order to eliminate the systematic pressure of water directly on the inlet valve. Open the valve, and then run the sink - water immediately enters the car.

to the contents ↑

Breakdowns that could provoke the problem

Why does not the dishwasher collect water? In order to answer this question, you must absolutely carefully and carefully inspect the machine, alternately checking each, possibly problematic, element. During the inspection you will stumble upon the very breakdown, which is the cause and which must be eliminated.

So, what are the main breakdowns that lead to the condition that the dishwasher wants to pour the water, but the water still does not flow into it:

• It does not arrive because of the clogged flow filter, or maybe the filter system.
• Water can not be supplied for the reason that the filling valve is broken.
• Water does not enter the dishwasher because the door mechanism has broken down.
• The pressure switch broke, and for this reason water does not enter the bowels of the dishwasher.
• The system "Aquastop" has worked, and because of this the water has stopped its flow into the unit.
• An element of the control unit went out of action.

to the contents ↑

We find a blockage and remove it

Considering all the so-called purity and softness of the tap water, one of the common faults of dishwashers are blockages in the intake valve filter. In this case, the water is dialed very slowly or not at all.

Important! A special device is a filter mesh, protects the machine from various types of abrasive substances and impurities.

You can eliminate this damage yourself, but for this you will need a little dexterity:

1. Unscrew the water supply hose, but before that, close the water.
2. In the place where the hose is connected to the machine, find the same filter mesh that is located straight at the beginning of the intake valve on the dishwasher.
3. Use a needle to clean it or immerse it in a hand-prepared citric acid solution for about 40 to 60 minutes.

to the contents ↑

The

door is not closed "Intelligent" automation, there is nothing to add. Any dishwasher is specially programmed in such a way that until the user tightly closes the door, water will not be recruited. When the door is closed tightly and the activation of the washing program has been successful, you will hear a dead click - this will mean that the lock has tightly closed the door.

Listen carefully if you have not heard a similar sound, then the problem that your dishwasher does not pick up water is the door, namely its not quite snug fit to the body of the car.

Important! Perhaps you have loosely pushed inside containers or reloaded the assistant with cumbersome utensils. If everything is in order - it may be in the breakdown of the lock, for which you will need a specialist for repair of such parts.

to contents ↑

Damage and kink of hose

The hose must always be in the so-called "natural" position, because if the tube is damaged or deformed in a certain place, the water supply will be poor or completely blocked.

Some users manage to install a machine on this hose. Naturally, this water does not enter the dishwasher.

to contents ↑

intake valve out of action Absolutely all dishwashers are equipped with a special water supply valve. When this technique starts working, the signal goes directly to the valve. That, in turn, is opened, as a result of which water begins to flow through the water supply system into the machine.

Due to wear or sudden voltage drops, the valve may burn.

Important! In this case, only its replacement remains.

to the contents ↑

Problems with the control module or the "Aquastop" system has failed.

Dishwashers are "smart" devices. All of them have long been equipped with artificial intelligence, which manages all processes for a person. This control module analyzes the set cycle of work and gives orders to individual elements of the dishwasher, for example, to the pump: to collect or drain the water.

If the module fails, the dishwasher will not strictly comply with the wash mode, it will be very buzzing or refuse to turn on at all.

Important! To eliminate this breakdown, you will need to reflash the "artificial mind", and in the worst case - completely replace it. Such repairs can be performed only by specialists.

The "Aquastop" system is built into the most modern models of dishwashers. It protects this unit from unexpected water leaks. If the dishwasher does not gain water, then there are only 2 reasons:

• The system was able to detect a leak and showed itself in action, that is, blocked the water supply to the machine.
• The function "Aquastop" itself broke.

Important! In either of these two cases, one can not do anything on their own, the help of specialists is necessary. Only they will be able to carry out the necessary repairs or simply replace the entire "Aquastop" system.

From this article you have found out the reasons why water does not enter the dishwasher and how to solve them. If you doubt your capabilities and knowledge regarding the device of such an assembly, it is better to entrust the diagnosis, testing, adjustment and repair to the masters of the relevant qualification. Otherwise, your wrong actions can lead to the complete withdrawal of expensive equipment, when the reason was originally simple and simple.