The washing machine constantly collects water

• Cause 1 - incorrect connection of
• Cause 2 - the measuring and regulating devices
• do not work correctly. Reason 3 - failure of the shut-off valves

Few people now spend time washing manually, because there are quite a lot of affordable washing machines. Therefore, when there are any problems, for example, a washing machine is constantly gaining water, but with nothing more happening, many are puzzled, what can we do next? In fact, any problem with the stylalki requires a call of a master who has sufficient qualifications and experience to solve various problems with such units. If you decide first to figure out what exactly is the failure and how much repair your equipment might cost, we suggest that you familiarize yourself with the reasons why the washing machine collects water, but does not erase it.

Cause 1 - incorrect connection of the

If the equipment is new and you use it for the first time, the reason may be very trivial - they have neglected to align the machine or install a drain hose when connected. As a result, water drains into the canal by gravity, the machine "thinks" that there is not enough water for washing and continues to add it. And further in a vicious circle.

To verify the fact of your own negligence or bad faith is easy enough - check the location of the drain hose - it should be slightly above the tank.

If this is not possible physically, for example, the closet or the bath screen is closely located, proceed as follows:

1. Turn on the washing cycle.
2. Wait for the moment when the tank is filled with water.
3. Set the "drain" function.
4. As the water decreases, pause.

We estimate the result:

• if the water in the typewriter in the standby mode continues to decrease, the problem is in plugging in;
• if the water level does not change - be upset, the problem is that the washing machine is constantly gaining water, in the internal failure.

Solve the connection problem with a professional technician. Be sure to check the result of his work.

Cause 2 - the measuring and regulating devices

work incorrectly. The pressure switch is a functional element of household appliances of this type. It is he who has all the responsibility for controlling the water level in the equipment. Therefore, if it broke, expect that the volume of water will be typed in the right amount, at least strangely.

Important! Incorrect data can follow in the programmer of the unit not only because of the breakdown of the sensor itself, but also because of clogging or scaling on internal pressure elements that operate under the pressure of the water pressure.

To determine if the cause is in the pressure switch, do the following:

1. Disconnect the machine from the mains.
2. Open the back cover.
3. Determine if you are armed with the instruction from the data sheet of the sensor location.
4. Inspect it for oxidised contacts.

We estimate the result:

1. If there are corrupted contacts - clean them with suitable means.
2. If they are in a satisfactory condition - call the master, you need to disassemble the equipment and look for an internal reason why the washing machine constantly collects water, but does not erase.

Important! If the contacts can not be cleaned, a sensor replacement is also required.

Cause 3 - Damage to the shut-off valve

From the shut-off valve, the reason for the washing machine to collect a lot of water can only become an intake valve. It is it that blocks the flow when such a command comes from the control module.

If the connection has loosened, the membrane in the valve has weakened, or the material of the housing has cracked, respectively - it is leaking or it is impossible to shut off the water. As a result, your washing machine continuously collects water.

Important! The solution to this problem is to tighten the fastening points or to completely replace the valve. Performing the latter without appropriate experience is not recommended, so as not to aggravate the situation.

That's all. The reasons that a washing machine is gaining a lot of water are not so many and they are all listed. In almost any case, you will need the help of a qualified master with a probability of 90%.So do not waste time, and look for a suitable specialist.