- Pros and cons of the "acid" effect on the scum
- Is everything so simple?
- We clean the washing machine with vinegar - procedure:
- How often do I do this?
- Cleaning the tray with vinegar
- What is the alternative?
During the operation of the washing machine, its internal parts are covered with lime coating. If you neglect the care of the washing machine, then its working life is reduced. One way to clean the stylalk from the plaque is acetic acid. Many doubt: can I clean the washing machine with vinegar? Will this not damage the unit? Despite the availability and ultimate simplicity, the use of vinegar allows you to get rid of the plaque even in the most inaccessible places. In addition, simple manipulation helps to remove and unpleasant smell of mold, which is transferred to things. The operation is extremely simple and, contrary to ridiculous rumors, absolutely safe for styralki. However, before you start cleaning, read about some of the nuances that you need to remember. Consider how to clean the washing machine with vinegar.
to the contents ↑Pros and cons of the "acid" effect on the scum
Before you clean the machine of scale with vinegar, evaluate the pros and cons of your decision. The positive moments of exposure to acetic acid are:
- The chemical activity of vinegar, which easily copes with lime. And so to withdraw the products of chemical reaction beyond the limits of the device - as they say, "the matter of technology."
- If everything is done correctly, then the risk of clogging the parts of the device with lime particles is almost zero.
- When cleaning, it is possible not only to rid the machine of lime, but also to remove unpleasant smells, which often arise after several years of using the device.
- Cheapness and availability. At the same time, the effectiveness of vinegar is not inferior to many professional drugs
The obvious disadvantage is the sharp smell of the reagent. But you can easily cope with this by running an additional rinse program.
Important! To avoid an unpleasant smell in the room, it is recommended to open the window or turn on the hood for the time of cleaning.
to the contents ↑Is everything so simple?
One more important point needs to be remembered: what vinegar to use for cleaning the washing machine. Dosage should be strictly observed. The use of a more concentrated acetic essence will not make the procedure more effective, and the rubber parts of the stylalk can suffer. They first harden, and then - are torn, which leads to a serious malfunction of the device.
to the contents ↑We clean the washing machine with vinegar - the procedure:
- Inspect the drum and remove the things therefrom, because under the influence of acid they can become unusable.
Important! Sometimes you can find advice that you need to use old rags when cleaning. This should not be done, as the fibers of textiles can collapse and provoke clogging of pipes. In addition, it does not add efficiency to cleaning.
- Pour 9% table vinegar into the machine tray, which is designed to fill the detergent powder.
- Set the longest wash program at the highest temperature and start the appliance.
- After the water has accumulated in the tank, it is heated and mixed with vinegar, put the stiralka on pause. Wait for at least 60 minutes.
- Run the program after the specified time. This time, wait for the complete end of the wash cycle. You can not stop the program ahead of time.
- After the program is completed, clean the drain filter of scale particles.
- Dilute 2 tablespoons of vinegar in a liter of water, then, using a soft cloth, clean the drum and rubber parts of the styrant.
- Start the washing again, without the use of detergents and vinegar. The shortest cycle is enough to clean the device of lime and detergent residues.
- Clean the machine with a dry, clean cloth, including the detergent tray. Leave the appliance open. The vinegar smell is eroding pretty quickly.
Important! If the result did not seem satisfactory to you, cleaning the washing machine with vinegar and soda helps.
to the contents ↑How often do I do this?
It is necessary to clean the machine of scale not only when its operational properties have clearly deteriorated, but also for the purpose of prevention. The frequency of the procedure is approximately once every 3 months. It is often not necessary to clean it, because rubber and plastic parts can suffer from acid.
Important! Do not use vinegar with other cleaning products. A chemical reaction can literally melt plastic components.
to the contents ↑Cleaning the tray with vinegar
Acetic acid will help get rid of not only the plaque on the inner parts of the stylalki. The reagent cleans well and the detergent tray. The algorithm is as follows:
- Pour 1 cup of vinegar into the container and pour very hot water.
- Place the tray in the prepared mortar so that the part is completely submerged.
- Soak the tray in vinegar solution for 8-9 hours.
- Rinse the tray with hot water, rinse and dry.
Important! If passive cleaning is not effective enough, the application of gruel from baking soda and vinegar will help.
to the contents ↑What is the alternative?
Other reagents are also used. For example, cleaning the washing machine with soda and citric acid. We should not forget about the prevention of plaque formation, such as the use of special water softeners during washing, as well as detergents, in which softeners are available.
Another interesting question: how to clean the washing machine with soda?- It's simple. It is enough to add 2 tablespoons of soda to each powder with each wash. This is an excellent remedy for calcareous deposits. The machine will last you much longer.
Here we are and figured out how to clean the washing machine with vinegar. It remains only to do this in order to reduce the energy consumption during washing, increase its efficiency and prevent equipment from failing, because in this case it will be necessary to erase all things manually. And this is tedious, so it's better to use the help of special equipment.
