How to drain water from a washing machine if it has broken down?

Washing machines are so firmly integrated into our everyday life that many people have a genuine bewilderment when suddenly the equipment breaks down in the middle of the wash cycle. The first thing that comes to such a situation in the head: how to drain water from the washing machine, if it broke, in order to get the loaded and already almost washed laundry? And only after that, we are already puzzled by whether it is worth calling a repairman for a malfunction or it would be time to buy a more modern washing machine for more convenient operation. How much time will be spent in this or that case - you decide on your own. And how to cope with the current problem of what broke the washing machine - how to drain the water, we will tell in this article.

to Contents ↑

Output 1

If the sewer hose is in your field of vision and free access, proceed in such a way as to drain the washing machine if it breaks down:

1. Prepare a large bucket if the equipment is far from the bathroom or wash basin.
2. Disconnect the equipment from the network.
3. Unscrew the connection point of the sewer hose to the machine.
4. Direct the hose directly into the tub, wash or in a bucket.
5. If possible, slightly tilt the machine after a few minutes in the direction of draining to remove all water from the tank.
6. Open the drum door and take out the things.

to the contents ↑

Exit 2

At the bottom of some models of such equipment there is a cap of the filtration tap, after unscrewing which the water is completely drained from the tank and you can open the door. In this case, we only need to consider the following:

1. Water will pour out quickly enough and its volume will be large. Therefore, put a rag on the floor, and if possible - substitute a container in which it will pour out.
2. Be prepared for the fact that rags and capacity will not save the situation and most of the liquid will be on the floor. You will then have to conduct a thorough wet cleaning to wash the floors.

Often the reason for stopping the washing cycle is garbage, which you can take out through this hole.

to the contents ↑

Exit 3

If there are special emergency nozzles on the tank, you will have to do almost the same procedure as in the first method, but somewhat differently. It is necessary after disconnecting the equipment from the network to reconnect the drain hose to these branch pipes. This way you will be able to drain the water from the washing machine if it has broken down.

to the contents ↑

Useful advices:

1. Before proceeding to any action and manually release the water, look at the programmer. Perhaps the machine stopped the cycle because it was accidentally paused or other buttons that led to this result.
2. Inspect the equipment to understand which emergency escapement method will be more convenient for you.
3. Do not forget to disconnect the equipment from the mains before unscrewing the drain hose or removing the plug.

We hope you have successfully coped with the task and were able to drain the water from the stylalk by hand. And in order to exclude the occurrence of such a breakdown in the future, we recommend in any case to call the master to perform the diagnostics and establish the cause of the fault.