The washing machine hums when pressed

The washing machine is an indispensable assistant to any housewife, helping to save time on washing, because it takes several times less time to load laundry and start the machine than to wash it manually. In addition, modern technology is quite noiseless, if compared with the very first samples created in the XX century. That is why, if the washing machine hums when pressed, the housewives begin to worry about the condition of their "helper".From this article we learn all the reasons for this phenomenon and how to fix the problem.

to the contents ↑

Causes of noise

If you just bought a machine, but are already unhappy with the strength of sound, first glance at the technical passport of the device, where the optimal sound power is prescribed. Sometimes it happens that the model itself is noisy.

But even under such conditions, the sound should not be unpleasant, interfering. If the noise starts to disturb, then it is worth considering whether everything is in order with the car. This does not mean that you need to call a master and spend money on diagnostics. First, try to find out the cause of unpleasant sounds yourself.

The main problems that can cause noise in the washing machine during spinning are not so many:

• The forgotten transport bolts;
• Presence of foreign objects;
• Bearing wear;
• Weak pulley pulley;
• Loose tank counterweights.

to the contents ↑

Identifying the cause and resolving it

When identifying the causes, first of all, pay attention to the nature of the noise, as it can indicate where to look for the problem. You can also inspect the car visually( check for any items).

Important! For a more detailed study of possible sources of noise, you should disconnect the washing machine from electricity in order to avoid unpleasant consequences.

Let's consider in more detail the causes of noise in the washing machine and their elimination.

During installation, you forgot to remove the shipping bolts of the

tank. A common mistake that occurs when installing the machine by "masters" and self-assembly.

Important! In the stylalk tank is suspended on special springs. It is made for greater amortization at washing. When transporting the tank is secured with special transportation bolts, so as not to damage the drum and the associated parts.

During the subsequent installation of the machine, the bolts are forgotten, and some even do not even suspect of their existence. As a result, immediately after the start of use, when washing, the washing machine hums and vibrates sufficiently. In addition, the life of your "helper" is significantly reduced.

To solve the problem, it is necessary to extend the machine and remove the transportation bolts with a wrench.

Foreign objects between the tank and the drum

When you wash clothes, there is always a possibility that in your pockets there will be some small things, for example, coins, or the button will fly off while the machine is running. The noise in this case will be quite appropriate: a metallic beat on the drum.

And it's good if the object, which is the primary source of noise, is in the drum. Get it from there is not difficult. The situation will be more complicated if the thing is between the tank and the drum. It is necessary to take out the heater, and only after that get the interfering object.

Important! To avoid this situation, before washing, you should check the clothes and take out of your pockets all small things that can disrupt the washing machine and your peace of mind.

Bearing failure

If the washing machine is noisy when spinning is particularly strong, then there is a chance that the cause is in the wear of the bearings. Thanks to them, the drum rotates. Their failure can lead to wedging of the latter and many other problems.

How to find out about the problem:

• To check the condition of the bearings, it is necessary to press the drum edge in the off state and turn it first clockwise and then against it. If you feel the breakthroughs and rolling of the ball bearings, rumble is heard, then the problem is in the bearings.
• This can also be confirmed by visual inspection of the machine: when removing the back cover you can see rusty stains coming from the bearings.
• You can also check the fl uor: in the open state, open the door of the machine, take the drum of the hand for the upper and lower edge and swing in different directions. If the fl uor is about a centimeter, you need to urgently call the master or independently change the bearings.

Important! It is not recommended to try to change bearings on your own if you have never worked with a machine before.

Bearing wear most often occurs due to the fact that the oil seal stops functioning: it starts to flow through the water, which leads to a breach of the sealing and the gradual failure of the bearings. In this case, you need to change also the omentum.

drum pulley weakened After a long period of using the washing machine during spinning, you can hear sharp clicks. They usually arise from the loosening of the bolt or nut( depending on the model) of the pulley attachment.

Important! For additional diagnostics, you can start the machine in the test mode: clicks will be heard at both small and high speed.

The problem is not terrible and easily eliminated:

1. It is necessary to remove the back of the styralka.
2. Use a suitable wrench to tighten the pulley securing bolt( bolt).
3. To avoid this situation, you can completely unscrew the nut, apply sealant and return it to its place.

Counterbalances of the tank are not fixed properly

For the stability of the tank, counterweights are attached to it, which extinguish the centrifugal force. Counterbalances are secured using conventional screws. The weakening of the latter arises with prolonged use, as a result of which the counterweights begin to beat against the tank, and we hear noise in the washing machine during spinning.

You can identify this problem during a visual inspection. To do this:

1. With the machine off, the rear panel must be removed.
2. Inspect all counterweights, if necessary, with a flashlight.
3. Loose counterweights must be tightened.
4. After that, the disturbing sounds should stop.

We hope that you managed to understand the reasons for the appearance of noise during the pressing and to eliminate it. To all easy and quiet washing!