Redmond does not turn on

One of the most popular and useful modern kitchen devices is a multivarker. Prepare in it you can almost any dish - starting with cooking regular porridge, ending with closed meat pies and other pastries. Naturally, like any electrical appliance, it can break down. But if you approach the problem correctly, then you will not notice how it will again become your indispensable assistant in the kitchen. The leader in the production of multivarieties - both the budget plan, and quite expensive with huge functionality, is the company Redmond. How to deal with situations when the Redmond multivarker does not turn on or some other malfunctions occur in its work, we learn from this article.

to the contents ↑

How does any home multivarker work?

To understand how to fix a multivark, you first of all need to understand how it is arranged in general, on what its work is based. Any model, including the Redmond brand, has two sensors, which actually determine which direction it should work in.

These sensors are connected to several wires that connect them to the control board, which is directly below the buttons. That is, if the display panel does not light up, it will mean that the power supply has failed.

Important! The Redmond multipacks can have mechanical or sensory control, in principle, both options can be called convenient.

to the contents ↑

Why did the multivarer stop switching on, what to do about it?

Let's look at the possible causes of such a malfunction of the multivariate and how to solve them.

Incorrect operation of the

Before starting the use of the multivarker, it is necessary to carefully study the instructions compiled by the manufacturer of this household appliance. Perhaps you just installed the wrong cup, and the technique does not turn on, in order to protect yourself.

To solve this problem, disconnect it from the network, open and install the correct cup, then try to turn it on again.

Insufficient supply voltage or lack of it

It is possible that the differences in the network are so detrimental to the operation of your multivark. To understand if this is so, check if electricity is running in the house. If not, then just wait for it to feed.

Maybe you just forgot to insert the plug into the socket?

The multivar does not turn on - wait, do not panic, first check that it is correctly connected to the network. Perhaps you just turned it off and forgot it the day before. To make it work again, simply insert the plug into the socket.

Wiring Problems

Malfunctions of the multivariate are often associated with clogged contacts. If the equipment is treated inaccurately, then it will constantly get the remains of various products and liquid, which can cause damage.

To make it work again, it is necessary to disassemble it and properly clean it from foreign objects inside.

Breakdown of the thermostat

Voltage jumps adversely affect the operation of the fuses, and they can simply burn. In order for the device to start functioning again, it is necessary to replace the damaged element:

1. First you need to untwist the multivark and find the inside of the heater.
2. The button should be disassembled, and you will see two wires black or orange, and the fuse itself is under the insulating tube.
3. Cutters cut the burned device and change it to a new one.

Important! Unfortunately, this is quite a common breakdown of the Redmond technique.

An error occurred

If some strange figures and letters appeared on the screen, it means that the multivarker produces an error code, and only by deciphering it, one can understand what happened.

Important! These codes are well known to specialists who are engaged in repair of multivarieties. If you decide to solve the problem yourself, why the Redmond multivarker does not turn on or gives another error, you will have to study the instruction very carefully. There, the corresponding section should indicate the designation of each error code.

chip is broken The problem of malfunctioning of the multivarker is helped more often by simple cleaning of the contacts of the thermostat, which is responsible for heating the bowl. It is located in the very depth of the device, so that to reach it you will have to almost completely disassemble the device.

Once you find the thermal relay, you need to loosen the contacts slightly and clean them with sandpaper or paper.

to the contents ↑

Other causes of the malfunction of the Redmond

Multivark There are several other less common reasons why the multivarker may stop working:

• The cooking program is not selected correctly. Remember that for each dish there is a separate program, so asking it wrong, you will not get the desired result.
• Blockage in the valve. In any multivark there is a special valve for removing steam, which can become clogged. Because of the clogging, the steam will accumulate inside the device, and it will begin to overheat excessively.
• Deformation of the bowl. This is most often a factory marriage, so repairs will occur under warranty.

to the contents ↑

Repair of the multivariate at home

Do not you have a multivarker? What to do? You can try to fix it yourself. It is better to start with cleaning the appliance, because during cooking, food pieces often fall past the bowl, it also happens that the liquid simply boils or spills. All these actions lead to a fast clogging of the internal device, and the multivariate begins to get warm, disconnect in the middle of cooking or make an unpleasant smell.

Therefore, it must be cleaned, and how to do this we will consider further.

Cleaning the multivark:

1. First you need to remove the bottom, and for this you have to unscrew the bolts or flip special buttons. There you will see everything that has got past the thicket - and the remnants of jam, and scattered cereals, and spilled milk.
2. Then you need to unscrew the heating device, pull out the wire from it and disconnect the button. And only then you can start cleaning it.
3. The enclosure should also be thoroughly washed inside and out.

Important! Collect the multivark can only after the final drying of all the details that were washed. And in order not to get confused in the wires and bolts, it's better to photograph each stage of the disassembly of the multivark.

to the contents ↑

How to properly operate the multivark?

To avoid the malfunction of the Redmond multivark, you need to follow certain rules - during cooking you need to do everything clearly and do not break the sequence of actions:

1. First you need to select a recipe and only then put the necessary products in the bowl.
2. Then we lower the cup into the multivark itself.
3. Be sure to check if it is connected to the mains, and only then ask the program and start cooking.

Important! In case of accidental ingress of food into the device itself, you must first remove it and then start again to prepare, otherwise - you risk ruining your internal contacts.

to the contents ↑

To contact the service center or not?

If your Redmond multivarker does not turn on, then this is certainly a good reason to worry, but do not panic right away. Most likely, the reason for this is not so serious and you can solve the problem yourself. To do this, perform the following manipulations:

• Disconnect the device and plug it into another outlet, because the reason is probably in it;
• Look carefully if the wire has not moved;
• Take a look at the instructions and check to see if you are doing everything right;
• You can still dry the multivark, because there may still be water inside it after you washed it.

As you can see, not all reasons for the failure of modern multivoroks are as serious as it might seem, and almost any breakdown can be fixed without leaving home. The main thing is to correctly handle this device, and in your house every day it will taste deliciously useful and quickly cooked food.