How to remove the top cover of the washing machine Indesit?

Each housewife faces at least once in life that the washing machine is out of order. Of course, many immediately turn to masters, to service centers or to friends who have already repaired this technique. However, many men decide to repair the "assistant" of each woman on their own. This is the correct option. The very first problem that everyone will face is the opening and removal of the top cover. But today you will learn how to do this and you do not have to contact the master. If you have a question about how to remove the top cover of the Indesit washing machine, do not think that it is hard and will require special skills. In fact, you just need to know how to do it.

to the contents ↑

Before disassembling the

Before carrying out any work with household appliances, including the laundry washing technique, it is necessary: ​​

• to drain all water from it;
• disconnect from power;Dry
• with cotton cloth.

Disassembly of the washing machine LG, as well as all other devices of various brands with side loading, occurs on the same principle. Therefore, if your "assistant in the laundry" is broken and her brand is not LG, you can also use this instruction when dismounting.

to the contents ↑

Instructions for disassembling washing machines with a vertical cover

How to disassemble a washing machine LG, Indesite and other brands? What tools will be required for this? How much time and effort will it take to remove the top of the device? For all these questions, you will find the answers in the instructions below.

So, let's start:

1. Before you start disassembling household appliances designed for washing clothes, you have to push it away from the wall. This is because the bolts that secure the top cover are located behind this unit.
2. If your "assistant" is installed under the sink or built into the countertop, you must first obtain it, remove it and then start disassembling it.
3. Now you need to unscrew the screws. In different models, the number of bolts varies from two to three. To perform this operation, you will need a Phillips screwdriver.

Important! Often manufacturers under the screws make plastic round liners, so when unwinding, be careful and do not lose them.

1. Now you can remove the top of the device. To do this, first pull this accessory back relative to the front with the button panel. Install it back in the reverse order: first move forward, and then move back.
2. After all these actions you can take to the repair of appliances for washing clothes, because you have already figured out how to remove the top cover of the washing machine.

to the contents ↑

Disassembly of other brands of erasers -

features There are models in which the disassembly of the technique goes a little differently:

1. One such is Ardo. In various models of the "Ardo" trademark, the lid is removed in a similar way, as in "Indesit", but the removal from the body is required to be made a little differently. In the previous case, we moved the upper part forward, and in this case - we must move forward at a slight angle. Do it carefully and slowly, as the moment of removal is necessary to "catch".
2. In old models of "Bosch" and "Siemens" trademarks the bolts for the upper part are fixed not only at the rear, but also in the front. Therefore, initially it is necessary to thoroughly inspect household appliances.

Today we told you about how to disassemble a washing machine LG, Indesit, Ardo, Bosch, Siemens and what will be required for this. As you can see, from tools you only need a Phillips screwdriver. The disassembly time and removal of the upper part will not take more than 15 minutes. Try, experiment, repair and you will succeed!