Washing machine Ariston - faults and their elimination

technology It is very difficult to imagine the process of washing manually. For this people are offered automatic washing machines. Very popular models of Italian production - Ariston Hotpoint. Despite the high guarantee of reliability and quality, they, like many other household appliances, are broken. Repair can be done at home, independently.

If it is a washing machine "Ariston" - faults and their elimination depend on knowledge of the basic causes of breakage. In this article you will find a lot of useful information on how to eliminate the breakdown by yourself, as well as find out the causes of malfunctions of such units.

to the contents ↑

Malfunctions of washing machines Ariston Hotpoint - symptoms of

Even the most reliable Ariston technique can cause the following problems:

• The machine does not squeeze out the laundry. Initially, you must select the desired washing mode. In addition, you should check how many revolutions you set in the spin function. If all the manipulations are performed, and the machine refuses to wring out the laundry, you should contact the service center.
• No water is heated. Such a problem can be connected with the failure of the thermostat. First you need to make sure the temperature sensor is working properly. In most cases, the failure of the thermostat happens due to the formation of calcareous deposits.
• Water does not drain from the machine after washing. This problem can be associated with a temperature sensor, in the case when the water is not heated. In addition, the pipe may be clogged with any objects that have got into the tank along with the things.

to the contents ↑

Frequent faults of the

If you have an Ariston washing machine, which faults occur most often and how difficult it is to eliminate them. Consider this issue:

1. Oil seals and bearings. In case of their breakdown on the further use of the washing machine, "Ariston" can be completely forgotten. You can try to replace them, but how long your unit will still work - the guarantee will not be given to you even by the master.
2. HEATER.The failure of the heating element is very common among the models of "Ariston Hotpoint."Such a problem arises because of poor quality water, which leaves behind a thick layer of scale.
3. Litter. The most common cause of faults in washing machines is not only Ariston. Very strong blockages can permanently stop the operation of the automatic styralka.
4. Drain pipe. Often the failure of this part occurs during the long-term use of technology.
5. Rubber gasket. With prolonged use, this part quickly wears out and the water begins to pour out of the tank. Replacement of rubber gasket specialist - one of the most expensive repair services for household appliances.

to the table of contents ↑

Some advice on self repair

Many faults of the washing machine "Ariston" can be carried out independently. To do this, you need to know a few standard rules for repairing automatic machines:

• Carefully read the instructions attached to the washing machine "Ariston".
• Troubleshooting the hotpoint model is much more profitable than buying a new one. For this it is only necessary to purchase the necessary spare parts.
• In case of fault finding of the washing machine "Ariston" you can use the warranty card and contact the service center. The warranty repair service is provided free of charge.
• If you decide to contact a specialist for help, you should first know the cost of his services.

to the contents ↑

Error codes for washing machines Ariston

In the event of a malfunction of the washing machine "Ariston", an error code is displayed on the display. Each code is associated with a specific cause of the malfunction, and with it you can figure out how to fix the problem:

• Code F01 indicates a short circuit in the motor of your vehicle. Eliminating the error is fairly straightforward. For this it is necessary to check all the contacts of the electric motor in the automatic machine. In addition, you should check if there is water in the machine. If damage to the motor has been detected, replace it.
• Error F02 occurs when the motor of the automatic machine does not function. To eliminate this problem, it is necessary to check the connection of the motor to the motor. In addition, it is necessary to check all windings of equipment parts.
• Fault F03 indicates a fault in the thermostat. To eliminate this malfunction of the washing machine "Ariston", you need to change the details of the heating system or replace the thermostat with a new one.
• Error F04 is displayed as a result of a malfunction of the pressure switch. To solve this problem, it is recommended to check the connection of the water sensor to the controller. In case of serious damage to the part, it must be replaced with a new one.
• Fault F05 notifies the dysfunction of the drain. For troubleshooting, you need to check the pump for clogs. If this is found, remove the blockage from the pump.
• Error F06 is displayed when the control buttons of the instrument are not working. In this case, it is necessary to replace the burnt parts of the control board or install a new part.
• Error F07 occurs due to the dysfunction of the TEN.To eliminate such a malfunction of the washing machine "Ariston", it is necessary to check all connection contacts on the heater. In case of burnout, replace the part with a new one.

to the table of contents ↑

Weaknesses in the Ariston

technique One of the weakest points of the Ariston automatic washing machine is a drain pump, as it is often subject to clogging. To eliminate blockage from the drain filter, it is enough to perform several simple manipulations:

1. Clean all easily accessible parts of the unit.
2. Clean the drain filter from accumulated debris.
3. Install all the parts in the correct order to their seats.

From this article you learned about what are the most common faults in washing machines "Ariston" and whether it is possible to perform their own elimination. Small blockages are quite possible to remove by oneself, and in case of more complex breakdowns, if there is no corresponding experience in the repair of household appliances, it is better to contact a qualified master immediately.