How to clean the mounting foam from the clothes?

Foam is one of the indispensable high-tech tools for a variety of construction and repair works. Mounting foam is used when it is necessary to insert windows or doors, and also to fill up cracks in walls and floors. One of the main advantages of the mounting foam is excellent adhesion( the ability to tightly connect to any surface), providing good tightness and strength in construction and finishing works. But there is the only drawback, exclusively domestic character - foam is badly removed from wood, metal, plastic, and especially from fabrics, and to carry out all the work so carefully that it does not get anywhere except for the necessary surface, is practically impossible because of the specifics of itsolution. How and what to clean the mounting foam from the clothes, we will tell today in the article.

to the contents ↑

What kind of substance is the mounting foam?

Polyurethane foam sealant, which is popularly known as mounting foam, is made from derived products obtained from oil processing. Various stabilizers, blowing agents and catalysts are added to the product. In short, the polyurethane foam sealant is an absolutely chemical product, which can not be removed by ordinary washing with the use of laundry soap or bleach from clothes.

Quickly clean the mounting foam from your clothes at home, only if you do it immediately after it has got on the fabric. If the stain has already absorbed and withered, then you can get rid of the foam only with the help of aggressive chemical preparations.

Important! The ideal option is to protect all surrounding space and clothing from the sealant before starting work. However, if the table top or the window sill can be covered with a film, then protecting it from contamination of the overalls in which you work daily is simply unrealistic, because no matter how hard you try, the foam will not be where you want it. Therefore, you just need to have some advices on your arms than to clean the mounting foam from your clothes.

to the contents ↑

How to clean the mounting foam from the clothes?

Once on clothes, the sealant immediately begins to soak up, hopelessly spoiling the fabric. And it must also be taken into account that such a construction mixture has the property of multiple expansion, because of which one insignificant drop can cause the appearance of a very large spot. Fresh mounting foam is much easier to remove from the fabric, but this task requires effort. Consider the main ways to remove fresh foam.

Tool for cleaning the mounting gun

Experienced builders and repair workers recommend together with the sealant to immediately buy a special cleaner. No matter how confident you are in the dexterity of your hands and your strength, but without contamination when working with mounting foam, you still can not do. One of the easiest ways to get rid of the sealant from clothes is to use a special tool to clean the mounting gun. Buy it can be in the same building or hardware store and it is inexpensive, so do not ignore the advice of experienced professionals.

If you have stained clothes and a cleaner at your fingertips, proceed as follows:

1. With any tool( spatula or knife) as quickly as possible, remove the entire foam cap from the surface of the clothing so that it does not become absorbed and dry.
2. In an inconspicuous place on clothes, check the reaction of the fabric to the cleaner and make sure that the product does not spoil the color of the product.
3. Soak the wiper, cotton pad or rags with a cleaner, and begin to soak a contaminated area of ​​clothing. The faster you start to impregnate the soiled area with a solution, the easier it will be to get rid of the foam without damaging the fabric.
4. After the foam has softened, wipe off the trail from it with a brush or a hard side of a dishwashing sponge.
5. Thoroughly wash clothes in a typewriter or manually by increasing the dose of laundry detergent or laundry soap.
6. Rinse clothes thoroughly and dry.

Important! Solving the problem, what will clear the mounting foam from the clothes, with the help of special equipment, be sure to protect your hands with gloves, so that the skin of your hands does not come into contact with the chemical.

Solvents as an effective cleaning method

How to remove the mounting foam from your clothes at home, if you do not have the tools for cleaning the mounting gun? Do not despair, in this case, use a conventional paint thinner. You can use the following tools:

• Refined gasoline.
• Acetone.
• White Spirit.
• Liquid for removing varnish.

Apply the above measures to the contamination, then remove the rest of the stain with a brush and wash the thing.

Important! Be sure, before using the product, try its effect on an inconspicuous part of clothing, for example, from the inside of the product.

Compared with a special cleaner, all of the above mentioned tools have some disadvantages:

• removal of stains will take much longer;
• aggressive agents can dissolve the paint on the fabric, and with intense exposure - even the tissue itself.

Important! All chemicals are classified as toxic. Therefore, when working with such products, do not forget to ventilate the room, do not allow them to get on the mucous area of ​​the nose, mouth and eyes. Be sure to use household gloves and a respirator when handling medications.

to the contents ↑

How to remove dried wiping foam from clothes at home?

During repairs, there is no time to pay attention to such trifles as pollution and various spots, and when it's time to pay attention to work clothes, there is already a stagnant spot in all its glory. It would seem, a hopeless situation - a good thing will need to be thrown out. But old stains can be removed, having the patience, skill and quite accessible means at hand. To cope with this task and remove dried wiping foam from clothes, we offer you such proven options.

Dimexide

One of the effective means is dimethylsulfoxide. We'll get to know him better. Dimethyl sulfoxide is a chemical preparation, it is a bipolar solvent. The product is less toxic than other types of solvents, such as kerosene, gasoline and acetone. Dimethyl sulfoxide effectively cope with even frozen foam on the fabric, and you can buy it in pharmacies called "Dimexide."This medical device is intended for external use.

In order to remove the stain from the mounting foam from the clothes, proceed as follows:

1. Gently scrape off the foam residues from the clothes.
2. Use a rag or cotton pad to apply "Dimexid" to the contaminated area.
3. Leave clothes for 30-40 minutes.
4. Clean the foam with a hard brush.
5. Thoroughly wash as usual with powder or household soap.
6. Rinse thoroughly.

Special solvent

In the hardware store, purchase a special solvent for frozen foam. It will also help to remove the frozen sealant, because its properties are similar to the means for cleaning the mounting gun, but its effect is much more intense.

Use the tool as follows:

1. Remove the frozen pieces of foam with a knife.
2. Clean the place of contamination with a compound with a cotton disc or rags.
3. Leave clothes for 20 minutes to allow the stain to soften.
4. Clean the foam remnants with a brush or a hard side of the sponge for the dishes.
5. If necessary, repeat the procedure again.
6. Rinse the cloth in warm running water.
7. Wash things as usual.

Aerosol cleaner

The most effective way to remove the mounting foam from clothes at home is to use special aerosol cleaners, the principle of which is based on the dissolution of polyurethane compounds. Such products include:

• "Termite".
• "Purex".
• "PENO-OFF".
• "Russian professional".

Important! You can buy special aerosols in a construction or hardware store. When using aerosols, observe the following simple rules:

• Spray the product near surfaces that are varnished or painted with caution, as the coating may be damaged if the product hits the surface.
• When working with a chemical, observe safety precautions: do not spray near open flames.
• Use protective equipment: gloves and respirator.

Use an aerosol cleaner as follows:

1. Shake and shake the can with the remedy.
2. Spray the cleaner on the contaminated area.
3. Leave clothes for 20-25 minutes.
4. Wash cloth with warm running water.
5. Thing wash.

Vegetable oil

Fats effectively clean stiff spots. Therefore, it is possible to clean the mounting foam from clothing with conventional vegetable oil. Proceed as follows:

1. Preheat a small amount of oil.
2. Apply to a contaminated area, previously cleaned of pieces of dried sealant.
3. After half an hour, pour the stain with a washing powder and whisk thoroughly, adding a little water.
4. Wipe the cloth with an ordinary rag and wash your clothes thoroughly.

to Contents ↑

Exposure to temperatures

To remove the mounting foam from clothing at home, it is not necessary to use improvised or professional chemistry. You can do with the effect of different temperatures. We offer you 2 most effective methods.

Cold against mounting foam

It is possible to remove the mounting foam from clothing with low temperatures. To do this:

1. Fold the soiled clothes in a bag so that the stain from the sealant protrudes outward.
2. Place the bag of clothes in the fridge freezer.
3. As soon as the foam freezes completely, remove it with a knife.
4. Remove the stain from the sealant gently with acetone, nail polish remover or solvent.
5. Wash clothing and rinse thoroughly.

Solar Light

High temperature destroys the structure and composition of the foam. Wear contaminated clothing in the sun, keep things under direct sunlight for several days. At the same time, as often as possible, knead the dried foam with your hands, so that it leaves the fabric faster.

Important! This method is best used on things made from dense and durable material, for example, on old working jeans or a canvas jacket.

to the contents ↑

How to wash the sealant by hand?

In order not to wonder how painlessly and without a trace to get rid of the sealant on your hands, all construction and finishing work must be carried out in thick leather or special PVC gloves.

Chemicals

If a few drops of foam are still on hand, then to remove them, use medical alcohol or gasoline. Wet the usual cotton swab, the selected product, and wipe the skin of the hands.

Important! If this method was not effective, then replace alcohol with a 3% solution of vinegar or acetone. After handling and removing the dried sealant, wash your hands thoroughly with liquid soap and plenty of water. Lubricate the skin with a baby soap.

Use and folk remedies:

1. Table salt. In the container pour a little warm water and dissolve in it a couple of pinch of table salt. Put your hands in the prepared solution, keep them in the water for a few minutes. Rinse and rinse your hands with cream.
2. Soap solution. Soapy water well removes fresh spots. Prepare a warm soapy solution and put your hands in it, and wipe the soiled areas with a washcloth or sponge.
3. Vegetable oil. Apply a lightly warmed oil to the hands. On the soiled areas, apply detergent and foam it. Wash your hands thoroughly with plenty of water.

To avoid wasting time to clean clothes and hands from sealant, always use protective gloves and protective clothing. It is very dangerous if the foam gets on your hair. In this case, only the radical method - cardinal haircut - will help, so when protecting and finishing work, protect the hair with a headdress. Always remember, the problem is easier to prevent than to solve. Successful to you and safe repair!