How to fold a shirt so that it does not wrinkle?

Looking into the wardrobe of any modern man, you can find far more than one shirt. But not every man can fold his shirt, so that it does not wrinkle. Shirts of good quality are made mainly of cotton with different additives and therefore require special care and attention. It is best to store such items on the hangers, but sometimes there are cases that it is impossible to do this. Therefore, in order for the shirt to have a perfect look, it needs to learn how to fold correctly.

to the contents ↑

How to fold the shirt?

Despite the fact that such a task may seem overwhelming, it is very simple to solve it. The main thing is to work out the appropriate technology and act the same every time. This is the algorithm you will find below. Use it.

Fold the shirt correctly:

1. Unscrew the shirt on the front side.
2. Close all the buttons.
3. Place the product so that the backrest is flat at the top.
4. Smooth the shirt with your hands so that it is free from wrinkles and creases.
5. Begin to add further from the left edge.
6. Take your fingers of one hand over the middle of the shoulder, mentally draw a straight line from the top to the bottom and at this point take the second hand.
7. Thus, one-third of the shirt is separated, and the same part is bent over the back. It should turn out that the sleeve lies diagonally.
8. Bend the sleeve parallel to the sidewall.
9. Do the same on the other side. Both sleeves should lie touching each other. At this stage, the shirt should remind its appearance with a rectangle.
10. Now the bottom part of the product - it's width about with a palm, bend on the back.
11. Fold the rectangle in half to the gate.
12. Folded shirt is ready. Turn it over and put it in a closet or in a suitcase.

Fast way:

To quickly fold the shirt so that it does not wrinkle, it is better to use the following method:

1. Place the product face down.
2. Divide mentally along three parts.
3. Take the ⅓ piece and bend back to the middle of the shoulder.
4. Take the sleeve and add it to three additions, so do the other.
5. The bottom of the shirt, which is tucked into the trousers, folds over the width of the palm.
6. You fold again and lift the bottom to the gate.

Done!

Folding a shirt in a suitcase

Going on a business trip, each man takes several types of shirts with him. But how to fold the shirts in a suitcase, so that in the morning you can put on fresh and not crumpled clothes and immediately go to the desired meeting? To do this, fold it as follows:

1. First of all, fasten the buttons and put the shirt on a hard surface.
2. Take in one hand the shoulder of the shirt, and the second hand - the bottom of the shirt at the same level.
3. Tighten the fabric - this should result in a crease line.
4. Fold the side part along the fold line.
5. Put the sleeves on your back, and be sure to point the cuffs down.
6. Divide the shirt into two pieces across fold the two halves bisected towards each other.
7. Fold once more - as a result, under the collar there must be a bottom edge.
8. Put all the shirts in a suitcase one by one, and arrange them so that the upper gate does not rest against the lower gate.

to the contents ↑

How to fold a T-shirt or T-shirt?

For both men and women in the warm season, there is nothing better than T-shirts, and in the summer - also T-shirts. They are very comfortable, but there is one "but" - how to fold a T-shirt and a T-shirt so that they do not get squashed in our closet or suitcase? This problem is very relevant for several reasons:

• in summer, many often travel and do not always rest on irons;
• even if you are at home, in the heat you often have to change such things, and every time you do not want to spend time ironing.

There is a wonderful method how to fold t-shirts so that they do not crumple. For this you need:

1. Place the product on the table.
2. Hold a straight line across the thing and a shoulder joint similar in the center.
3. Take the left hand by the point where these straight lines intersect, and for the center of the shoulder seam - with your right hand.
4. Hold the right hand for the left hand, do not let go of the point on the shoulder.
5. Take the bottom edge and turn the opposite edge.

There are also several ways of folding T-shirts or T-shirts that are popular in different countries around the world. Take for yourself the most convenient for you and use it if necessary.

Japanese method:

1. Select a smooth, flat surface.
2. Spread just the ironed thing.
3. Hold the sleeve of the product with your right hand and the bottom with the left hand.
4. Conduct a mental line from the place of capture of the right hand to the very bottom. It should be parallel to the side seam. On the line, take your thing with your thumb and index finger.
5. Fold your T-shirt in half and leave your left hand in place, and move the right one to the bottom, and there you also take the lower part.
6. Pull your left hand toward you and shake the thing to smooth out all the wrinkles.
7. Right hand bend the shirt symmetrically.

That's folded.

The Italian method

The Italian method is very similar to the Japanese method. A differs only in a few characteristic features. Follow the instructions and everything will turn out:

1. Lay on a flat surface your T-shirt or jersey.
2. With your right hand, take the far shoulder closer to the neck.
3. Take your right thumb and index finger with your right hand.
4. Raise so that the edge that is farther is bent on the opposite side.
5. If you join hands, you should get a T-shirt, folded in half.
6. Take your right hand to the other side.
7. Place the T-shirt on the table and bend the edge symmetrically.

The t-shirt is folded.

to the table of contents ↑

Useful tips for folding T-shirts and T-shirts

All of the above methods are convenient, but still require a certain amount of time. To make things as easy as possible for yourself, use several additional useful tips.

Tip 1

Modern technological progress every day is used by manufacturers of various household appliances. In particular, there was a new device specifically for the rapid folding of any shirts, shirts, T-shirts. Constructively - this is a special board, which should be used in this way:

1. Place the T-shirt on the board only with the front side.
2. Wrap the sleeves inside.
3. Add the resulting rectangle several times and put it in the cabinet on the shelf.

Tip 2

Such things often have pictures or prints. They can either exfoliate or break. Check when you buy a similar product, so that the picture on the T-shirt was qualitative. Otherwise, after frequent folding procedures, the pattern in the creases may wear off or tarnish.

Tip 3

There is another way to fold the t-shirt - folding. It is convenient because when you fold things, they take up very little space in the cabinets or on the shelves. That's the way, for example, put things on wholesale bases, so that sellers spend as little time as possible. The technology to the surprising is simple:

1. . On the shoulder line, the sleeve is tucked inside.
2. Fold in the form of a cylinder.
3. Roll the cylinder into the tube.

Done!

Folding a shirt or T-shirt in various ways may not be the first time. Do not get hung up on this, after a couple of trainings, you will necessarily get it right.