How to choose the right bath?

click fraud protection
Contents:
  • Selection criteria
  • What materials are used for making bathtubs?
  • How to choose a whirlpool bath?

Despite the fact that today there is a great alternative to the arrangement of a bathroom with the help of a shower cubicle, how to choose the right bathtub is a topical issue. It is taking a bath you can completely relax after a busy day and even get better at home. About what kind of baths and what to look for when choosing this plumbing fixture, you will learn from this article.

to the contents ↑

Criteria for choosing

To solve the problem of how to choose a bathroom correctly, it did not take you much time, and you could then fully evaluate all the advantages of buying, act consistently.

Determine with the following parameters:

  1. Type of construction - simple bowl or hydromassage.
  2. Dimensions - must match the installation location you specify. Minor deviations are possible in the larger side in the event that it is possible to hide the beads in the thickness of the walls in the stitches. If you plan to decorate the bowl with beautiful bows, take a smaller bathtub. Be sure to correlate the overall dimensions with the parameters of the entrance opening, so that there is no difficulty in bringing the plumbing into the bathroom.
  3. The shape of the bowl and the color - it all depends on your chosen style and personal preferences.
  4. The material from which the bowl is made is the most crucial stage in the course of which it is necessary to take into account all the pros and cons of each option. Only in this case you will know for sure which bath is right for you.

Important! About what kind of bowls are and how to choose a bath from every existing material for today, what to look for when choosing a complex design of the whirlpool device, read below.

to the contents ↑

What materials are used for making bathtubs?

Modern range of such plumbing is quite diverse. In any store you will definitely see a number of models from:

  • acrylic;
  • cast iron;
  • steel.

Each kind has its pros and cons, more about which we will discuss below.

Cast-iron bathrooms - pros and cons

Until recently, only such bowls were installed in all apartment houses and apartments. There was no alternative. Despite the current diversity, these products do not lose popularity, as the cast iron baths have several advantages:

  • insignificant thermal conductivity, due to which the water remains hot for a long time;
  • excellent sound insulation performance - when filling the bowl with water there is no loud noise background;
  • beautiful appearance - although such bathtubs have a predominantly rectangular shape, many designers even make real masterpieces with an attractive appearance;
  • surface is covered with enamel - thanks to this, a beautiful glossy gloss is achieved, which, if properly maintained, will last a long time;
  • the service life of such a bath is practically unlimited;
  • , there are no complex rules for surface care and, even with the formation of a rust or other stains, it is easy to remove them.

Important! The only drawback of this bath can be identified only its cumbersomeness and impressive weight - from 100 kg with a standard shape and size. Also, conventional cast iron and even more designer models will cost an order of magnitude more expensive than the stamped acrylic or steel bowls. This is due to the fact that some seek to save or facilitate the process of installation, deciding the question of how to choose the right bath in favor of another material.

Steel baths - advantages and disadvantages

Steel bathtubs, even though they are present on the market and even find their customers, are not really convenient and enjoyable in operation.

Comparing them with cast iron ones, we first have to note a number of drawbacks:

  • very short heat retention - up to 20 minutes;
  • a strong noise when the water flows out of the mixer - it will be heard even by the neighbors in the riser;
  • over time, the steel deforms, on the surface of the enamel can be formed cracks, which means that such baths are not suitable for people with high weight.
  • instability and risk of sliding on the tile, which means additional expenses of money, time, and also the ability to securely fix the bowl.

Important! The advantages of this option is that the steel baths are cheap, have a light weight and in principle the disadvantages can be eliminated inexpensively. If you decide to give preference to this material in order to choose the right bath of steel, pay attention:

  • for the thickness of its walls - it should be at least 5 mm;
  • for the absence of obvious signs of an initial deformation;
  • for the smoothness and homogeneity of the enamel coating without visible defects.

Acrylic bathtubs - advantages and disadvantages

Acrylic bathtubs are a modern solution in favor of which many people give their preference.

There are several reasons for this:

  • is a wide range of shapes, sizes;
  • variety of colors and decorative finishes;
  • light weight;
  • the fastest and easiest installation;
  • excellent indicators of heat preservation - for half an hour the water temperature drops only by 1 degree;
  • no noise background when pouring water;
  • low price;
  • ease of equipping any additional equipment to increase comfort during water procedures;
  • maintainability - to eliminate defects and even completely refresh the cup can be inexpensive with their own hands at home.

Important! To choose the right acrylic bath, also pay attention to the thickness of its walls - the denser they are, the more layers of reinforcement, the stronger, safer and more durable your device will be. According to the recommendations of professional plumbers, the thickness of the walls of such a bath should be at least 8 mm, and the bottom - from 10 mm.

to the contents ↑

How to choose a whirlpool bath?

If you decide to equip your bathroom with full comfort and install a hydromassage bowl for water procedures and sanitation in it, consider the following recommendations when choosing such a design:

  1. Number of nozzles - at least 12 pieces, optimally - up to 30.
  2. Their location isbe around the perimeter of the device.
  3. Functionality - it is best if you buy a whirlpool bath with the functions of computer regulation and control of the intensity of the flow, the number of jets.
  4. Pump power - this depends on the duration of the treatment bath and the intensity of the supply of water.

Important! Installation and adjustment of such a device should be entrusted to specialized specialists in order to avoid various problems during the operation and to get warranty service free of charge.

Now you know what kind of bowls are and how to choose the right bath. Take into account all the nuances of each type of plumbing, in advance, design your room for water procedures, review the catalogs to assess the design possibilities of this plumbing and only after that make the final decision. We hope that with the help of our advice the whole process will take you a little time!