How to glue the ceiling skirting board?

The installation of skirting boards on the ceiling is the final stage of repair, when the finishing of walls and ceilings is already completed. And it is on the basis of the quality of this work that the final result will depend. Therefore, even in such a seemingly trifle, it is necessary to understand. Here and consider in this article how to glue the ceiling skirting.

to the contents ↑

What is the baseboard made from?

For the manufacture of modern ceiling decor, such materials are used:

• Polystyrene.
• Polyurethane.
• Polyfoam.
• Tree.

feature of them is that they are strong enough, durable, easy to use. Working with synthetics is a pleasure. At the same time, the materials quite realistic imitate stucco.

Let's look at each material in more detail so that you can make a choice more thoughtfully.

to the table of contents ↑

Polyfoam

The arguments in favor of the foam are:

• a small mass, which greatly simplifies the repair;
• low cost.

Polyfoam, in addition, is very easy to process. For inexpensive repairs - this is an acceptable option.

Polystyrene cons.

• Insufficient strength. Although a special strength for skirting on the ceiling and is not required, but the material easily breaks during operation.
• Flammability.

Foam plastic bags are perfectly combined with putty and gypsum board surfaces. Mount them best on plaster or acrylic putty, special glue or alabaster solution.

Important! Mount the plinth from the foam plastic can be in a room with high humidity( moisture resistant material).But it must be abandoned in rooms where there is a risk of fire. Fire resistance does not apply to the benefits of this material.

to the table of contents ↑

Polyurethane

Of the listed materials, the absolute leader is polyurethane. Its unique properties are that it:

• is unusually flexible;
• is fire resistant;
• does not absorb water;
• does not "preserve" smells.

Important! He has only one minus: higher cost, in comparison with polystyrene and foam plinth skirting.

There are several varieties of polyurethane decor on sale. Sometimes use the same skirting for floor and ceiling. They are attached to a special glue, and in the corners apply special lining. To glue the ceiling skirting is not difficult at all. It is enough to use a special gluing compound. The field of application of the material is very wide.

Important! The slats are white, but they can be painted.

to the table of contents ↑

Wood

Wooden decor is suitable if the room is finished with chipboard, billet or MDF.When using wooden decor, you can "plant" on the glue only small parts. The plinth is fixed using self-tapping screws. The use of nails for installation is undesirable. After the skirting is fixed, the screws are treated with putty for the color of the wood. The same putty is used for sealing joints.

For the manufacture of moldings, the following types of wood are used:

• Oak.
• Aspen.
• Birch.
• Mahogany.

Important! Wooden skirting boards must be treated with a special composition from insects before installation. Also, special treatment is needed to increase the fire resistance.

to content ↑

Polystyrene

This material has the same advantages as polystyrene, however, it is more dense and durable. The joints are much more accurate. But the cost of polystyrene is higher. Mount it can be on the adhesive for polystyrene.

to the contents ↑

Choosing the right skirting board

Well, it's quite logical, before you mount the ceiling decor, you need to choose the right one. Plinths differ in length, width, pattern and texture. In addition, they can be convex or concave.

Of course, the choice of this or that variant entirely depends on the taste preferences of the hosts, but there is a set of universal basic rules that are suitable for everyone without exception. For example:

• for spacious high spaces suitable wide and massive plinth;
• for a small room - thin and narrow.

Important! In addition to the height of the ceilings, we must take into account the type of wallpaper on the walls. Solid wallpaper will look better with a plinth decorated with patterns, and for walls with a pattern, smooth skirts are more suitable.

When choosing the following points should be taken into account.

• Weight. Here the principle "the less weight, the better" operates. Sometimes spectacular-looking bars move away from the surface under their own weight.
• Ease of care( removal of contaminants, the need for periodic tinting).
• The width of the surface of the strip adjacent to the wall. The principle is this: the wider this width, the easier it is to assemble.
• Flexibility. This criterion is relevant if the room has a complex configuration.
• Strength. This factor determines the durability of the decor.

to the contents ↑

How to glue the ceiling skirting correctly?

To get started, get these tools:

• Joiner's chair. This device allows you to cut pieces of material at the right angle.
• Hacksaw or fret saw. If these tools are not available, they can be replaced with a sharp knife.
• Pencil.
• Roulette.
• Adhesive composition. It can be special glue, sealant or "liquid nails".

Work execution rules:

• Before starting the fillet sticking, primethe place of adherence of baguettes to the walls and ceiling.
• Then, using a spatula or a building syringe, apply a sticky compound to the baguette.
• Begin installation from a long wall. At the same time, gently press one part of the bar to the ceiling, and the other - to the wall.

Important! This rule "works" if the walls are flat enough. If - no, then too much to press the plinth to the wall is not worth it. It will repeat the unevenness of the surface and it will look ugly. It is much more rational to fill the voids with a sealant or putty, and then clean it with fine-grained emery. If you do everything neatly, the joints will be completely invisible.

• If in the process of working on the surface of the glue, it's okay. With your finger, stretch it around the joint. Small gaps in this case will be sealed.

Important! If too much glue has been released, you can remove the excess with a sponge soaked in water, and then wipe with a clean dry cloth.

• After the skirting is assembled, treat the corners and joints with putty.
• If you plan to paint the plinth, you must first coat the surface with a primer. It is desirable to paint the decorative element with water-based paint. Apply paint with a brush or spray.

How to smoothly cut material?

In order for the "corners" of the slats to look immaculate, it is best to use a construction chair. This tool helps to cut the material smoothly and at the right angle. Typically, this is either 45 or 90 degrees.

Important! Practice at first with a small piece of the bar, but you can be sure: the result is amazing!

Now you know how to properly glue the ceiling skirting. The work is not very difficult, but requires care and accuracy.