How to clean the protective glass from the inside?

The modern market offers every customer a huge number of different models of gadgets, smartphones and other similar devices. Despite the fact that the display is made reliably, the buyer decides to extend its service life by purchasing a protective glass. This is due to the fact that in time we are not so careful about smartphones, as in the first stage. Today we'll talk about how to clean the protective glass from the inside and what we need for this tool.

to the contents ↑

What is a protective glass?

Protective glass is a modern kind of coverage of displays on smartphones and gadgets. It is made with the help of a chemical method based on tempered glass.

Important! Compared with ordinary film, it is several times thicker and harder. That's why, if the phone has this coating, it protects the screen from fingerprints, scratches, moisture and even bumps. Despite these characteristics, brightness and color do not change.

Due to the multilayer coating, the thickness of the glass varies from 0.25 mm to 0.5 mm, the composition of which is:

• The first layer is always made on the basis of silicone. It sticks to the display.
• The next layer is the fastener. It is he who does not allow the splinters to spread, if a crack or mechanical impact occurs.
• The third layer of the coating is an anti-reflective film. It retains the visibility of the pictures on the screen if it receives direct sunlight or other bright light.
• The protective layer protects against impacts, falls and other mechanical damage.
• The most recent layer is an oleophobic coating. It provides protection from moisture, fingerprints and simplifies screen cleaning.

With active use, the top cover, ensuring the reliability of the unit, becomes dirty. That's when the question arises about how to clean the phone's protective glass. How to do this and what is required for this, we will consider further.

to the contents ↑

What is a protective film?

Protective film appeared on smartphones for a long time. It is not a high-tech product and is present on every gadget. This product is characterized by the presence of three layers:

• the lower of them sticks to the screen;
• medium absorbs ultraviolet radiation and provides brightness when bright light hits;
• upper - responsible for protecting the display screen.

Important! The most important for the film is proper gluing. To do this, you need to have a small skill, since from the first time it can not always turn out.

All the protective films that are present in the smartphone and gadget market are divided into three types: matte, glossy and mirror. Let's take a closer look at each species to understand if there will be a difference in cleaning:

• The matte film absorbs glare, and also hides fingerprint traces. The main disadvantage is that it degrades image quality. However, its cost is very low. Many masters refer this film to the technological one and advise not to stop the final choice on this product.
• Glossy protective film is the most popular among similar products. The main disadvantage of this coating is that it is easily damaged. The film strongly reflects light, scratches and other mechanical damage quickly appear on it. Also fingerprints are visible.
• Mirror film is the least popular among similar products. The peculiarity is that with an extinct screen it can mirror the image. However, the quality and brightness of the screen changes when applying this coating - this is a major drawback.

All of the above films are dirty and especially noticeable when the dust gets under the covers. How to clean the film for the phone, we now disassemble.

to the contents ↑

How to clean the protective glass on the phone?

If you are thinking about how to clean the film for your phone, then ordinary scotch, or as it is also called, an adhesive tape, will help you. For this you need:

• take a wide scotch;
• cut off a piece of about 30-40 cm;
• glue it to the surface so that the sticky side is on top.

After this, the protective film should be glued to the adhesive tape with a sticky side. Then, very gently and slowly immediately peel off the film. All the dust that was present on this product will go away, and the sticky layer will remain.

Important! If you need to remove scratches from the top of the protection, then polish the defects with felt, soft cloth or with the help of auxiliaries - tooth white paste, GOI paste or olive oil.

Another way to clean the protective glass from the inside is to use water and soap. For this:

• you need to remove the contaminated product from the phone.
• In hot water, wash away all specks.

Important! We recommend doing this at a certain angle and in bright light, so that you can see the specks of dust that you will clean.

• After carrying out this procedure, it is very good to soap the sticky layer with soap. For this, it is better to use two or three layers.
• After this, take and wash off the soap solution under water. Look to the water from the glass.
• Then on the cleaned wet display we glue the film, using an ordinary credit card.
• We look, so that air bubbles and other villi do not get into it.

Today, we dismantled all kinds of protective films and talked about how to clean the protective glass from the inside. As you can see, it's quite easy to do this. Now you do not need to throw out the old film and paste a new one, because you can just clean and paste again on the gadget the same protection. Use our advice and simplify your life!