How to disassemble the remote from the LG TV?

When you switch channels, you may notice that the buttons do not work well. This is a signal that the device needs to be cleaned. As a rule, the cause of the incorrect operation of the remote control is the remains of food, and sometimes the liquid spilled onto it: tea, juice or coffee. Of course, there is a need in specially designated places for this, but the temptation is still great. So, let's look at how to disassemble the remote from the LG TV to calmly, nervously switch channels and change the TV settings when you want it, quickly and easily.

to the contents ↑

Step 1

First, study the remote control itself( how the back cover is fastened).The following procedure is as follows:

• Open the rear cover.
• Remove the batteries and see how the fastening screws are located in the compartment.

Important! They are small in size, you can unscrew them using a Phillips screwdriver.

• Unscrew the screws.

to the contents ↑

Step 2

Using a plastic card, gently pry the cover. Then draw a card along the entire contour of the case. Then, being extremely careful, remove the battery contacts from the grooves.

to the contents ↑

Step 3

After you removed the back cover, notice how the board is fixed:

• If it's screwed on, just unscrew it.
• If it is secured with latches, then it must be opened neatly.

to Contents ↑

Step 4

Notice how the IR diode is located in the slot to understand how to further disassemble the remote from the LG TV, Philips or any other model:

• In most cases it is not fixed.
• If it is fixed in the slot, remove it. Do this very carefully. Then remove the board.

to Contents ↑

Step 5

It is easy to remove the rubber buttons:

• Shake them out of the sockets.
• If not shake out, then click on them from the front.

Now you can do things for which you have dismantled the device - its cleaning. And it's much easier.

You can ask: how to disassemble the remote from the Sony TV?Similarly, since the devices are arranged according to the same principle. Using the above instructions, you will successfully cope with the task.

to the contents ↑

Cleaning the

To clean the device from dirt, prepare such devices:

• Alcohol or alcohol containing liquid.
• Small brush with soft pile.
• Clean pieces of soft cloth.

Using this kit, you can, without dismantling the device, perform external cleaning every week.

Important! To assemble the PU, do not cause difficulties, arrange the parts in the order they are extracted.

In the future, try to keep the device away from food and drinks. To the console is not heavily soiled, get a special cover for it. It will protect the device from contamination. In this case, the question of how to disassemble the remote from Philips TV, LG or Sony, will not worry you too often.